How to Address Issues with the Steering Column Seal on 2008 Chevrolet Impala?

To install a new steering shaft seal in the middle, switch the ignition off and take away the key. Unscrew the steering column connection to the intermediate shaft then pull off the seal of the intermediate shaft. To install, put the lower seal over the shaft then the upper seal, and reconnect the shaft with the steering column.

OEM 2008 Chevrolet Impala Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2008 Chevrolet Impala Lower Seal Part Number: 26049464
Product Specifications
- Other Name: Seal, Steering Gear Shaft; Cover Seal; Speed Sensor Seal; Seal; O-Ring
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26049464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Impala Steering Column Seal

With a comprehensive array of OEM 2008 Chevrolet Impala Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Impala Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Impala Steering Column Seal Parts and Q&A

Q: How to Address Issues with the Steering Column Seal on 2008 Chevrolet Impala?
A: To install a new steering shaft seal in the middle, switch the ignition off and take away the key. Unscrew the steering column connection to the intermediate shaft then pull off the seal of the intermediate shaft. To install, put the lower seal over the shaft then the upper seal, and reconnect the shaft with the steering column.