How to service and repair the Steering Angle Sensor on Chevrolet Impala?

To service and repair steering angle sensor, the first step is to identify the type of steering wheel position sensor based on illustrations presented. The front of the sensor connector will be on the right. If the use of the existing sensor is only done, you do not need to center it before removing it. Start by unscrew the connector from the sensor and unplug the sensor from the adapter and the bearing assembly. Make an alignment mark on the flush rotor flange cuff if reusing the existing sensor when installing the sensor because misalignment due to failure to make this mark will occur. To install, make sure that the sensor is aligned with the steering shaft and place it in the adapter and bearing assembly, making sure that the connector is securely attached. The front of the sensor will include a foam ring, a pin hole for the centering pin, aflush rotor flange cuff, and an alignment mark. If the same sensor is re-used, align marks from the flush rotor flange cuff and put it in alignment until it seats after installation. If a newly installed sensor will be installed it will have a pin that should not be removed until the sensor is seated. The back of the sensor will have double d flats, a foam ring and an alignment tab for proper installation into adapter and bearing assembly. Repeat the process of alignment and installation as much as needed on each sensor, do not fail to record the particular features of alignment marks so that you can imagine installation.

OEM Chevrolet Impala Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Angle Sensors found

View related parts
Chevrolet Impala Angle Sensor Part Number: 10336934
$238.93 MSRP: $406.76
You Save: $167.83 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Sensor
- Replaces: 10305163
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Position Sensor Part Number: 13589991
$41.83 MSRP: $116.38
You Save: $74.55 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly
- Replaces: 13579709, 13589257, 13584209, 13513905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Chevrolet Impala Steering Angle Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Steering Angle Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Steering Angle Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Steering Angle Sensor is one of the important parts that greatly impact the reliability and performance of the automobile. This kind of sensor is used for detecting the position of the steering wheel in real time and it is usually used in system such as ESC for enabling proper vehicle control in different conditions. Over the years, the Chevrolet Impala has gone through different designs of the Steering Angle Sensor due to the improvement of technology. Yaw and ABS wheel speed senors complement these sensors since they help in controlling the brakes and thus ensure that one does not make a spin during maneuvers. The Chevrolet Impala Steering Angle Sensor is available for various Impala models and will be of benefit for any driver that wants to improve the efficiency and safety rate of the car. The electric factors control the level of power steering assistance depending on the speed and the input from the steering wheel making the car to have better road feel. It contributes to improving the driving experience and at the same time maintains workmanship that is both comfortable and powerful so characteristic of Chevrolet Impala. Other evident features of the Steering Angle Sensor are its functions to share the data with other electrical systems to present a more personalized driving experience which is combined with invulnerability of the Steering Angle Sensor and cannot be found in most automotive brands. All in all, the Chevrolet Impala Steering Angle Sensor precisely exemplifies that Chevrolet Impala is highly reliable, safe, and high performing which are the main principles of car design.

Chevrolet Impala Steering Angle Sensor Parts and Q&A

Angle Sensor
10336934
Q: How to service and repair the Steering Angle Sensor on Chevrolet Impala?
A:
To service and repair steering angle sensor, the first step is to identify the type of steering wheel position sensor based on illustrations presented. The front of the sensor connector will be on the right. If the use of the existing sensor is only done, you do not need to center it before removing it. Start by unscrew the connector from the sensor and unplug the sensor from the adapter and the bearing assembly. Make an alignment mark on the flush rotor flange cuff if reusing the existing sensor when installing the sensor because misalignment due to failure to make this mark will occur. To install, make sure that the sensor is aligned with the steering shaft and place it in the adapter and bearing assembly, making sure that the connector is securely attached. The front of the sensor will include a foam ring, a pin hole for the centering pin, aflush rotor flange cuff, and an alignment mark. If the same sensor is re-used, align marks from the flush rotor flange cuff and put it in alignment until it seats after installation. If a newly installed sensor will be installed it will have a pin that should not be removed until the sensor is seated. The back of the sensor will have double d flats, a foam ring and an alignment tab for proper installation into adapter and bearing assembly. Repeat the process of alignment and installation as much as needed on each sensor, do not fail to record the particular features of alignment marks so that you can imagine installation.