How to replace the Crankshaft Position Sensor on 2008 Chevrolet Corvette?

In order to install the Crankshaft Position Sensor, the negative battery cable should be disconnected, and the vehicle must be raised and the starter removed. Wipe off the area surrounding the CKP sensor, and then unscrew the CKP sensor, including the retaining bolt. Reverse the installation of the CKP sensor, connect the electrical connector once again and perform the required steps.

OEM 2008 Chevrolet Corvette Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2008 Chevrolet Corvette Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Crankshaft Position Sensor

With a comprehensive array of OEM 2008 Chevrolet Corvette Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2008 Chevrolet Corvette?
A: In order to install the Crankshaft Position Sensor, the negative battery cable should be disconnected, and the vehicle must be raised and the starter removed. Wipe off the area surrounding the CKP sensor, and then unscrew the CKP sensor, including the retaining bolt. Reverse the installation of the CKP sensor, connect the electrical connector once again and perform the required steps.