How to replace the Camshaft Position Sensor (CMP) for the intake on 2007 Chevrolet Cobalt?

You have to eliminate the intake manifold cover before replacing the Camshaft Position Sensor (CMP) for the intake. The CMP sensor electrical connector needs disconnection from the engine wiring harness before you remove the CMP sensor bolt and the CMP sensor itself. The CMP sensor requires an inspection for damage before install and it needs replacement if found damaged. Clean engine oil must be applied to the CMP sensor O-ring seal before adding the sensor and bolt while tightening it to 10 N.m (89 lb in). The engine wiring harness electrical connector must be reattached to the intake CMP sensor while you replace the intake manifold cover.

OEM 2007 Chevrolet Cobalt Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2007 Chevrolet Cobalt Camshaft Position Sensor, Green Line Part Number: 12674704
$45.19 MSRP: $91.80
You Save: $46.61 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674704
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Camshaft Position Sensor Part Number: 12584079
$73.95 MSRP: $132.06
You Save: $58.11 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 12571266
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.5 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12584079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2007 Chevrolet Cobalt Camshaft Position Sensor

With a comprehensive array of OEM 2007 Chevrolet Cobalt Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Camshaft Position Sensor Parts and Q&A

Q: How to replace the Camshaft Position Sensor (CMP) for the intake on 2007 Chevrolet Cobalt?
A: You have to eliminate the intake manifold cover before replacing the Camshaft Position Sensor (CMP) for the intake. The CMP sensor electrical connector needs disconnection from the engine wiring harness before you remove the CMP sensor bolt and the CMP sensor itself. The CMP sensor requires an inspection for damage before install and it needs replacement if found damaged. Clean engine oil must be applied to the CMP sensor O-ring seal before adding the sensor and bolt while tightening it to 10 N.m (89 lb in). The engine wiring harness electrical connector must be reattached to the intake CMP sensor while you replace the intake manifold cover.