How to replace the exhaust Camshaft Position Sensor on Chevrolet Cobalt?

The replacement process for exhaust camshaft position (CMP) sensor begins with removal of the intake manifold cover. First disconnect the exhaust CMP sensor electrical connector and proceed to remove the CMP sensor bolt while remembering the similar procedure for the intake CMP. Check the CMP sensor for any damage and get a replacement if required after sensor removal. Engine oil must be used to lubricate the CMP sensor O-ring seal before installing the sensor since its procedure matches the intake CMP. Fasten the CMP sensor bolt at 10 Nm (89 lb in). Proceed with connecting the exhaust CMP sensor electrical connector followed by the replacement of the intake manifold cover.

OEM Chevrolet Cobalt Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
Chevrolet Cobalt Camshaft Position Sensor, Green Line Part Number: 12674704
$45.19 MSRP: $91.80
You Save: $46.61 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Cobalt | Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Camshaft Position Sensor Part Number: 12584079
$73.95 MSRP: $132.06
You Save: $58.11 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 12571266
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS

Chevrolet Cobalt Camshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Camshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Camshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cobalt Camshaft Position Sensor is a significant part that is responsible for making sure proper combustion of gasoline and speed of the auto is sensed. In cooperation with the crank sensor, CP/S Camshaft Position Sensor is used to co-ordinate the engine pistons and valves and for determining the correct injection timing and counting the engine revolutions per minute. Normally installed close to the cylinder head, this sensor is important when it comes to fuel burning and achieving desired fuel economy in Cobalt vehicles. While replacing the sensor, it has to be placed properly and fastened with new o-ring and mounting bolts and this will help in the performance of the engine. The basic and recommended way to avoid the problems related to ignition failure and poor acceleration of Chevrolet Cobalt is proper maintenance and negligent to the Camshaft Position Sensor.

Chevrolet Cobalt Camshaft Position Sensor Parts and Q&A

Camshaft Position Sensor
12584079
Q: How to replace the exhaust Camshaft Position Sensor on Chevrolet Cobalt?
A:
The replacement process for exhaust camshaft position (CMP) sensor begins with removal of the intake manifold cover. First disconnect the exhaust CMP sensor electrical connector and proceed to remove the CMP sensor bolt while remembering the similar procedure for the intake CMP. Check the CMP sensor for any damage and get a replacement if required after sensor removal. Engine oil must be used to lubricate the CMP sensor O-ring seal before installing the sensor since its procedure matches the intake CMP. Fasten the CMP sensor bolt at 10 Nm (89 lb in). Proceed with connecting the exhaust CMP sensor electrical connector followed by the replacement of the intake manifold cover.