How to replace the Air Bag Sensor in the Front End on 2007 Cadillac XLR?

Ahead of replacing the Inflatable Restraint Front End Sensor, turn off SIR system. Then, remove the retaining bolts from inflating restraint front end sensor, and remove it from the vehicle. In installation, insert the new sensor into the vehicle and do not forget to adhere to the Fastner Notice. Then, the retaining bolts would be installed to the inflatable restraint front end sensor with 9 N.m (80 lb in). Finally, enable the SIR system.

OEM 2007 Cadillac XLR Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

View related parts
2007 Cadillac XLR Front Impact Sensor Part Number: 10385762
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Front Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaces: 10345689
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10385762
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac XLR Air Bag Sensor

With a comprehensive array of OEM 2007 Cadillac XLR Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac XLR Air Bag Sensor Parts and Q&A

Q: How to replace the Air Bag Sensor in the Front End on 2007 Cadillac XLR?
A: Ahead of replacing the Inflatable Restraint Front End Sensor, turn off SIR system. Then, remove the retaining bolts from inflating restraint front end sensor, and remove it from the vehicle. In installation, insert the new sensor into the vehicle and do not forget to adhere to the Fastner Notice. Then, the retaining bolts would be installed to the inflatable restraint front end sensor with 9 N.m (80 lb in). Finally, enable the SIR system.