How to replace the Heated Oxygen Sensor 2 on 2007 Buick Rendezvous?

In order to replace the heated Oxygen Sensor 2, to begin with, lift and prop up the car. Remove the connector position assurance (CPA) retainer and unplug the engine harness electrical connector from the ho2s. Now, pull out the clip of ho2s electrical connector from the heat shield. In order to remove the ho2s using the tool j 39194-b (Heated Oxygen Sensor Wrench). When installing, make sure that if ho2s is being replaced, a special anti-seize compound gm p/n 12377953 or of its equivalent is applied on the threads of the ho2s. With the help of the j 39194-b, install the ho2s and tighten to 41 n.m (30 lb ft). Connect the engine harness electrical connector to the ho2s and install the cpa retainer, and secure the ho2s electrical connector clip to heat shield and then lower the vehicle.

OEM 2007 Buick Rendezvous Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2007 Buick Rendezvous Oxygen Sensor Part Number: 19209807
$87.79 MSRP: $178.30
You Save: $90.51 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor; Front Oxygen Sensor
- Replaces: 12570149, 12574924, 12572772
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS
View related parts
2007 Buick Rendezvous Oxygen Sensor Part Number: 12597878
$48.99 MSRP: $99.54
You Save: $50.55 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.1 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS

2007 Buick Rendezvous Oxygen Sensor

With a comprehensive array of OEM 2007 Buick Rendezvous Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Oxygen Sensor Parts and Q&A

Q: How to replace the Heated Oxygen Sensor 2 on 2007 Buick Rendezvous?
A: In order to replace the heated Oxygen Sensor 2, to begin with, lift and prop up the car. Remove the connector position assurance (CPA) retainer and unplug the engine harness electrical connector from the ho2s. Now, pull out the clip of ho2s electrical connector from the heat shield. In order to remove the ho2s using the tool j 39194-b (Heated Oxygen Sensor Wrench). When installing, make sure that if ho2s is being replaced, a special anti-seize compound gm p/n 12377953 or of its equivalent is applied on the threads of the ho2s. With the help of the j 39194-b, install the ho2s and tighten to 41 n.m (30 lb ft). Connect the engine harness electrical connector to the ho2s and install the cpa retainer, and secure the ho2s electrical connector clip to heat shield and then lower the vehicle.