OEM 2006 Cadillac DTS Ignition Coil

2006 Cadillac DTS Ignition Coil Parts and Q&A

• Q: How to replace the Ignition Coil(s) for Bank 2 on 2006 Cadillac DTS?

  A: The first task when replacing Bank 2 ignition coils starts by taking out the fuel injector sight shield. Service of the ignition coil assembly begins by detaching the engine harness electrical connector before removing bolts and the assembly itself. The first step for individual ignition coil replacement is to detach the electrical connector then remove the individual ignition coil bolt followed by the ignition coil itself. When installing an ignition coil assembly, position the assembly with all its bolts before tightening them to 10 N.m (89 lb in). You must connect the engine harness electrical connector to the ignition coil assembly. The installation of an individual ignition coil begins with fitting the ignition coil hardware and then torquing the individual ignition coil bolt to 10 N.m (89 lb in) before connecting the individual ignition coil electrical connector. Reposition the fuel injector sight shield.