How to replace the Knock Sensor (KS) on 2006 Cadillac DTS?

Replace the Knock Sensor (KS) by taking out the Intake Manifold first. The crankshaft position (CKP) sensor wiring harness electrical connector should be disconnected from the right Knock Sensor when necessary along with removal of the connector from the left Knock Sensor. First detach the appropriate Knock Sensor for visibility purposes (chassis photo removed). The installation process requires using the new Knock Sensor while tightening it to 25 n.m (18 lb ft) torque with the fastener notice of service precautions as guidance. Following the Intake Manifold reinstall you must hook up the ckp sensor electrical connector to the left Knock Sensor and the connector to the right Knock Sensor when needed.

OEM 2006 Cadillac DTS Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2006 Cadillac DTS Knock Sensor Part Number: 12567446
$27.17 MSRP: $51.00
You Save: $23.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434672
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567446
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac DTS Submodels:
- Base | 8 Cyl 4.6 L GAS

2006 Cadillac DTS Knock Sensor

With a comprehensive array of OEM 2006 Cadillac DTS Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac DTS Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac DTS Knock Sensor Parts and Q&A

Q: How to replace the Knock Sensor (KS) on 2006 Cadillac DTS?
A: Replace the Knock Sensor (KS) by taking out the Intake Manifold first. The crankshaft position (CKP) sensor wiring harness electrical connector should be disconnected from the right Knock Sensor when necessary along with removal of the connector from the left Knock Sensor. First detach the appropriate Knock Sensor for visibility purposes (chassis photo removed). The installation process requires using the new Knock Sensor while tightening it to 25 n.m (18 lb ft) torque with the fastener notice of service precautions as guidance. Following the Intake Manifold reinstall you must hook up the ckp sensor electrical connector to the left Knock Sensor and the connector to the right Knock Sensor when needed.