OEM 2006 Buick LaCrosse Oil Filter

2006 Buick LaCrosse Oil Filter Parts and Q&A

• Q: How to Replace an Engine Oil Filter on 2006 Buick LaCrosse?

  A: Begin with turning off the ignition before starting the engine oil and Oil Filter replacement procedure. A six-point socket removes the Oil Filter cap before you need to discard the Oil Filter cartridge. Rise the vehicle and secure it at a height while installing a suitable container underneath the drain hole of the oil pan. Draining the oil requires removal of the oil pan Drain Plug until all fluid has completely emptied out. Attach the oil Drain Plug to the oil pan while using a new o-ring seal before tightening it to 20 nm (15 ft. Lbs.). Next install the new Oil Filter cartridge after lowering the vehicle. You must apply clean engine oil to the threads of the Oil Filter cap before installation because this prevents damage during removal. You should tighten the Oil Filter cap to 25 nm (18 inch lbs.) with a six-point socket. Before closure add the proper oil type along with its correct quantity through the oil fill opening.