How to replace the multifunction turn signal switch on 2005 Cadillac CTS?

To replace multifunction turn signal switch, trim covers removed and sir system disabled. Turn steering column to center position, disconnect connectors and remove assembly. Install the new assembly, making sure to establish good contact, reconnect the connectors and install the trim covers before activating the sir system.

OEM 2005 Cadillac CTS Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2005 Cadillac CTS Turn Signal Switch Part Number: 1999306
Product Specifications
- Other Name: Switch Assembly-Turn Signal & Headlamp & Headlamp Dimmer & Fog; Multi Purpose Switch; Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Turn Signal Lamp
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1999306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2005 Cadillac CTS Turn Signal Switch

With a comprehensive array of OEM 2005 Cadillac CTS Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac CTS Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac CTS Turn Signal Switch Parts and Q&A

Q: How to replace the multifunction turn signal switch on 2005 Cadillac CTS?
A: To replace multifunction turn signal switch, trim covers removed and sir system disabled. Turn steering column to center position, disconnect connectors and remove assembly. Install the new assembly, making sure to establish good contact, reconnect the connectors and install the trim covers before activating the sir system.