How to replace the Brake Light Switch on 2005 Cadillac CTS?

To replace the Torque Converter Clutch/Cruise Control Release Switch, remove the left closeout panel. Pull the upper switch from the retainer and disconnect its electrical connector. For installation, reconnect the electrical connector, reinstall the switch, adjust it, and finally, reinstall the left closeout panel.

OEM 2005 Cadillac CTS Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2005 Cadillac CTS Clutch Switch Part Number: 13597429
$12.12 MSRP: $19.25
You Save: $7.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Brake Pedal Position; Brake Light Switch; Stoplamp Switch; Sensor; Sensor, Stop Lamp Switch; Sensor, Engine Clutch; Sensor Kit, Brake; Sensor, Brake
- Replaces: 89047699
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 3.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13597429
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2005 Cadillac CTS Brake Light Switch

With a comprehensive array of OEM 2005 Cadillac CTS Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac CTS Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac CTS Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch on 2005 Cadillac CTS?
A: To replace the Torque Converter Clutch/Cruise Control Release Switch, remove the left closeout panel. Pull the upper switch from the retainer and disconnect its electrical connector. For installation, reconnect the electrical connector, reinstall the switch, adjust it, and finally, reinstall the left closeout panel.