How to replace the front cross-member for the steering gear on 2004 Chevrolet SSR?

Start by elevating then supporting the vehicle to proceed with steering gear crossmember replacement. Start by removing the front crossmember brace before moving on to remove the rear lower Control Arm Bracket frame mounting bolts and steering gear crossmember mounting bolts. The first step involves removing the steering gear crossmember from the system. Begin placement of the steering gear crossmember while following the fastener notice during installation. Through a torque of 50 n.m (37 lb ft) correctly tighten all steering gear crossmember mounting bolts during installation. Screw the rear lower Control Arm Bracket to frame mounting bolts while tightening them to 240 n.m (177 lb ft). Finish up the installation process by putting back the front crossmember brace then lower the vehicle down.

OEM 2004 Chevrolet SSR Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2004 Chevrolet SSR Transmission Support Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.8 x 36.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15090722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Front Crossmember Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Item Weight: 11.10 Pounds
- Item Dimensions: 32.8 x 10.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15085421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet SSR Front Cross-Member

With a comprehensive array of OEM 2004 Chevrolet SSR Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Front Cross-Member Parts and Q&A

Q: How to replace the front cross-member for the steering gear on 2004 Chevrolet SSR?
A: Start by elevating then supporting the vehicle to proceed with steering gear crossmember replacement. Start by removing the front crossmember brace before moving on to remove the rear lower Control Arm Bracket frame mounting bolts and steering gear crossmember mounting bolts. The first step involves removing the steering gear crossmember from the system. Begin placement of the steering gear crossmember while following the fastener notice during installation. Through a torque of 50 n.m (37 lb ft) correctly tighten all steering gear crossmember mounting bolts during installation. Screw the rear lower Control Arm Bracket to frame mounting bolts while tightening them to 240 n.m (177 lb ft). Finish up the installation process by putting back the front crossmember brace then lower the vehicle down.