In order to replace the front steering gear crossmember, first, lift and support the vehicle. You pull the front crossmember brace out off till you pull the rear low
Control Arm Bracket to frame mounting bolt and the steering gear cross member mounting bolts out. Then, take the steering gear crossmember out. For installation, start by installing the steering gear cross member in its place while adhering to the fastener notice. Mount the steering gear crossmember mounting bolts and tighten them to 50 n.m (37 lb ft). Next, insert in the rear lower Control Arm Bracket to frame mounting bolts and tighten them to 240 n.m 177 lb ft. Last, reattach the front crossmember brace and ground the car.