OEM 2004 Cadillac CTS Automatic Transmission Filter

2004 Cadillac CTS Automatic Transmission Filter Parts and Q&A

• Q: How to Properly Maintain the Automatic Transmission Filter on 2004 Cadillac CTS?

  A: Repair and service of automatic transmission fluid and filter demands that you start by lifting the car along with vehicle support followed by placing a drain pan underneath the transmission fluid Drain Plug. Take out and dispose of the transmission Drain Plug which allows fluid to flow while you examine it for signs of discoloration and contamination. The service requires users to install a new transmission fluid Drain Plug followed by tightening to 20 nm (15 ft. Lbs.). To free the fluid pan proceed by loosening its bolts. A rubber mallet can be used to gently tap when needed. Take out the fluid pan together with its gasket before you thoroughly clean and examine the magnet and pan and bolts and gasket for damage or wear. A long screwdriver should be used to remove the fluid filter while you use the universal seal remover (J23129) and slide hammer adapter (J6125-1B) to take out the 2 fluid filter seals. Install two new fluid filter seals onto the transmission fluid filter neck while smuggling the edges with lightly moistened transjel lubricant (J36850) or petroleum jelly. The installation of the transmission fluid filter should be performed into the transmission case while simultaneously putting in the fluid pan and gasket unless noticeable damage exists on the sealing surface. Secure the fluid pan bolts with 11 nm of torque when possible (97 inch lbs.). After filling the transmission to its correct level lower the vehicle down then check for any oilpan gasket leakages.