How to replace the front outside door handle on 2003 Cadillac CTS?

Begin by placing the window fully upward before removing the door trim panel to replace front outside Door Handle. To gain access to the outside Door Handle one must pull the rear part of the water deflector from the door panel. Before proceeding start by disconnecting the theft shield retainer and screws from the Door Handle when the vehicle has such equipment installed. Completely separate the lock rod from both door systems by using the retainer opening located at the door latch to disconnect it. Take out the Door Handle with attached handle rod and lock rod by removing its mounting nuts first. You should begin the installation by attaching both handle rod and lock cylinder rod to the outside Door Handle before placing the Door Handle with rods attached into the cutout and rotating it into position. Fasten the outside Door Handle nuts using a torque of 7 nm (62 lb in). The installation requires you to position both rods into the specified clip on the Door Latch Assembly while keeping the clip in a closed state. The Door Handle and lock cylinder need proper operational inspection before fitting any theft shield with its retainer while fastening both theft shield screws using 7 nm (62 lb in) torque. As your final step install both the water deflector followed by the door trim panel.

OEM 2003 Cadillac CTS Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Door Handles found

View related parts
2003 Cadillac CTS Handle, Outside, Driver Side Part Number: 20857749
$31.36 MSRP: $47.31
You Save: $15.95 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 25749397, 25843393, 25749403, 25705398
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 4.8 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Mirror Inside, Passenger Side Part Number: 20857697
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle; Handle, Outside
- Position: Passenger Side
- Replaces: 25843395, 25749402, 25705397, 25749396
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.9 x 4.8 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Pull Handle, Driver Side Part Number: 25759729
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle; Handle, Inside
- Position: Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.7 x 6.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25759729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Cadillac CTS Grip Handle, Gray Part Number: 88952118
Product Specifications
- Other Name: Handle, Rear Quarter And Roof Rail Assist
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.5 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88952118
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Pull Handle Part Number: 88982081
Product Specifications
- Other Name: Handle, Front Door Trim
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.5 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88982081
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
2003 Cadillac CTS Handle, Outside, Driver Side Part Number: 20857696
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 25749399, 25749406, 25843394
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.8 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20857696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Grip Handle Part Number: 88952119
Product Specifications
- Other Name: Handle, Rear Quarter And Roof Rail Assist
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.0 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88952119
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
2003 Cadillac CTS Pull Handle, Passenger Side Part Number: 25759728
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle; Handle, Inside
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.1 x 4.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25759728
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Cadillac CTS Pull Handle Part Number: 89041932
Product Specifications
- Other Name: Handle; Handle, Front Door Trim
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89041932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS

2003 Cadillac CTS Door Handle

With a comprehensive array of OEM 2003 Cadillac CTS Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac CTS Door Handle Parts and Q&A

Q: How to replace the front outside door handle on 2003 Cadillac CTS?
A: Begin by placing the window fully upward before removing the door trim panel to replace front outside Door Handle. To gain access to the outside Door Handle one must pull the rear part of the water deflector from the door panel. Before proceeding start by disconnecting the theft shield retainer and screws from the Door Handle when the vehicle has such equipment installed. Completely separate the lock rod from both door systems by using the retainer opening located at the door latch to disconnect it. Take out the Door Handle with attached handle rod and lock rod by removing its mounting nuts first. You should begin the installation by attaching both handle rod and lock cylinder rod to the outside Door Handle before placing the Door Handle with rods attached into the cutout and rotating it into position. Fasten the outside Door Handle nuts using a torque of 7 nm (62 lb in). The installation requires you to position both rods into the specified clip on the Door Latch Assembly while keeping the clip in a closed state. The Door Handle and lock cylinder need proper operational inspection before fitting any theft shield with its retainer while fastening both theft shield screws using 7 nm (62 lb in) torque. As your final step install both the water deflector followed by the door trim panel.