How to service the camshaft position sensor on 2003 Cadillac CTS?

Several steps to service the camshaft position sensor include disconnection of the electrical connector and pigtail clip of the knock sensor. Unscrew the bolt with the CMP sensor and unscrew. Wipe the mating surfaces then install the CMP sensor again, screw it with the bolt and then reconnect the electrical connector.

OEM 2003 Cadillac CTS Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2003 Cadillac CTS Camshaft Position Sensor Part Number: 9146032
$97.89 MSRP: $174.02
You Save: $76.13 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Camshaft Position; Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.2 x 4.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9146032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS

2003 Cadillac CTS Camshaft Position Sensor

With a comprehensive array of OEM 2003 Cadillac CTS Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac CTS Camshaft Position Sensor Parts and Q&A

Q: How to service the camshaft position sensor on 2003 Cadillac CTS?
A: Several steps to service the camshaft position sensor include disconnection of the electrical connector and pigtail clip of the knock sensor. Unscrew the bolt with the CMP sensor and unscrew. Wipe the mating surfaces then install the CMP sensor again, screw it with the bolt and then reconnect the electrical connector.