How to service and repair a ball joint on 2001 Chevrolet Venture?

Start by detaching the lower Control Arm and fixing it in a vice for the Ball Joint service. Pry off the rivet heads on the ball stud then hit them with a hammer and drift punch to take out the ball stud from the lower Control Arm. To mount the assembly insert the new ball stud onto the lower Control Arm with nuts facing downward toward the Control Arm away from the Ball Joint. This is a torque type fastener that you may use again as long as the fastener's counterpart maintains its proper condition and produces at least 2 nm of force (18 inch lbs.) when seated. A new fastener needs replacement when both quality standards are not achieved. Install new ball stud nuts before fitting the lower Control Arm and tightening them to 68 nm (50 ft. Lbs.).

OEM 2001 Chevrolet Venture Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2001 Chevrolet Venture Ball Joint Part Number: 88965333
$48.48 MSRP: $82.54
You Save: $34.06 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 88955451, 22157089
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.1 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2001 Chevrolet Venture Ball Joint

With a comprehensive array of OEM 2001 Chevrolet Venture Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Venture Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Venture Ball Joint Parts and Q&A

Q: How to service and repair a ball joint on 2001 Chevrolet Venture?
A: Start by detaching the lower Control Arm and fixing it in a vice for the Ball Joint service. Pry off the rivet heads on the ball stud then hit them with a hammer and drift punch to take out the ball stud from the lower Control Arm. To mount the assembly insert the new ball stud onto the lower Control Arm with nuts facing downward toward the Control Arm away from the Ball Joint. This is a torque type fastener that you may use again as long as the fastener's counterpart maintains its proper condition and produces at least 2 nm of force (18 inch lbs.) when seated. A new fastener needs replacement when both quality standards are not achieved. Install new ball stud nuts before fitting the lower Control Arm and tightening them to 68 nm (50 ft. Lbs.).