How to service the Heated Oxygen Sensors (Bank 1 HO2S 1 and Bank 2 HO2S 1) on 2000 Chevrolet Camaro?

Service procedures for heated oxygen sensors (Bank 1 HO2S 1 and Bank 2 HO2S 1) require the sensor to maintain pigtail and connector attachment to prevent impact on functionality. You need to handle the sensor gently in order to maintain the in-line electrical connector and louvered end clear of dirt and grease and chemical-free from contaminants during removal. The sensor becomes challenging to take out when engine temperature remains below 48°c (120°F) since using too much strength can harm Exhaust Manifold threads along with pipe threads. Start by supporting the vehicle then detach the electrical connector of the ho2s before slowly removing the heated Oxygen Sensor. To make future removal easier the installation process requires application of p/n 5613695 anti-seize compound to heated Oxygen Sensor threads where the compound combines graphite and glass beads to help sensor removal. Tighten the heated Oxygen Sensor by hand to 42 n.m (31 lb ft) torque spec after connecting the ho2s electrical connector.

OEM 2000 Chevrolet Camaro Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oxygen Sensors found

View related parts
2000 Chevrolet Camaro Oxygen Sensor Part Number: 19178924
$68.05 MSRP: $138.20
You Save: $70.15 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor
- Replaces: 25161130, 25312207, 12587214, 19178921, 25164983, 25312196
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.0 x 2.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Camaro Oxygen Sensor Part Number: 19178958
$61.65 MSRP: $125.22
You Save: $63.57 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Front Oxygen Sensor; Manifold
- Replaces: 25178022, 25312203, 25312211, 25164488
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.0 x 2.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, RS | 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Camaro Oxygen Sensor, Driver Side Part Number: 19355308
$71.31 MSRP: $144.84
You Save: $73.53 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Position: Driver Side
- Replaces: 19178928, 25161131, 25312197
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.1 x 2.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19355308
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS

2000 Chevrolet Camaro Oxygen Sensor

With a comprehensive array of OEM 2000 Chevrolet Camaro Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro Oxygen Sensor Parts and Q&A

Q: How to service the Heated Oxygen Sensors (Bank 1 HO2S 1 and Bank 2 HO2S 1) on 2000 Chevrolet Camaro?
A: Service procedures for heated oxygen sensors (Bank 1 HO2S 1 and Bank 2 HO2S 1) require the sensor to maintain pigtail and connector attachment to prevent impact on functionality. You need to handle the sensor gently in order to maintain the in-line electrical connector and louvered end clear of dirt and grease and chemical-free from contaminants during removal. The sensor becomes challenging to take out when engine temperature remains below 48°c (120°F) since using too much strength can harm Exhaust Manifold threads along with pipe threads. Start by supporting the vehicle then detach the electrical connector of the ho2s before slowly removing the heated Oxygen Sensor. To make future removal easier the installation process requires application of p/n 5613695 anti-seize compound to heated Oxygen Sensor threads where the compound combines graphite and glass beads to help sensor removal. Tighten the heated Oxygen Sensor by hand to 42 n.m (31 lb ft) torque spec after connecting the ho2s electrical connector.