How to replace the Crankshaft Position Sensor on 2000 Chevrolet Camaro?

To change the crankshaft position (CKP), disconnect the negative Battery Cable first. Remove the serpentine belts from the Crankshaft Pulley, and then make use of a 28mm socket in removal of the crankshaft Harmonic Balancer retaining bolt. Use the balancer remover (J38197) and remove the crankshaft Harmonic Balancer. Next, pull off the Crankshaft Position Sensor shield without using pry bar, pull the sensor electrical connector, and remove the sensor from the block face. To install, mount the Crankshaft Position Sensor onto the face of the engine block and tighten the bolts to 20-40 n.m (14-28 lb ft). Return the Crankshaft Position Sensor shield to its place and reattach the electrical connector. Mount the balancer onto the crankshaft, apply thread sealer (GM-1052080) or equivalent on crankshaft balancer bolt threads, and tighten to 150n.m +76 degrees (110 lb ft +76 degrees). Lastly, install the serpentine accessory Drive Belt and reconnect the negative Battery Cable.

OEM 2000 Chevrolet Camaro Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2000 Chevrolet Camaro Crankshaft Position Sensor Part Number: 12560228
$66.20 MSRP: $119.82
You Save: $53.62 (45%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12560228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2000 Chevrolet Camaro Crankshaft Position Sensor Part Number: 10456161
$86.13 MSRP: $174.94
You Save: $88.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456161
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Camaro Submodels:
- Base, RS | 6 Cyl 3.8 L GAS

2000 Chevrolet Camaro Crankshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Camaro Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Camaro Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Camaro Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2000 Chevrolet Camaro?
A: To change the crankshaft position (CKP), disconnect the negative Battery Cable first. Remove the serpentine belts from the Crankshaft Pulley, and then make use of a 28mm socket in removal of the crankshaft Harmonic Balancer retaining bolt. Use the balancer remover (J38197) and remove the crankshaft Harmonic Balancer. Next, pull off the Crankshaft Position Sensor shield without using pry bar, pull the sensor electrical connector, and remove the sensor from the block face. To install, mount the Crankshaft Position Sensor onto the face of the engine block and tighten the bolts to 20-40 n.m (14-28 lb ft). Return the Crankshaft Position Sensor shield to its place and reattach the electrical connector. Mount the balancer onto the crankshaft, apply thread sealer (GM-1052080) or equivalent on crankshaft balancer bolt threads, and tighten to 150n.m +76 degrees (110 lb ft +76 degrees). Lastly, install the serpentine accessory Drive Belt and reconnect the negative Battery Cable.