How to replace a Coil Springs and Shock Absorber assembly on Pontiac G6?

If the struts or coil springs show signs of wear such as leaking fluid, loss of damping capability, chipped, sagging or cracked coil springs, it is important to explore all options before starting any work. The strut coil spring components cannot be serviced and must be replaced if there is a problem. However, there may be strut assemblies available that come complete with springs on an exchange basis, which can save time and effort. Before disassembling the vehicle, it is recommended to check the cost and availability of parts. To disassemble the strut and spring assembly, the strut clevis bracket portion should be mounted in a vise. A spring compressor should be installed on the spring following the manufacturer's instructions to relieve pressure from the upper spring seat. The damper shaft nut should be unscrewed while holding the damper shaft from turning. The nut and upper mount should be removed and laid out in the order they were removed. The rubber portion of the upper mount should be checked for cracking and deterioration, and replaced if necessary. The upper spring seat should be removed from the damper shaft and the rubber portion should be inspected for cracking and hardness. The bearing in the spring seat should also be checked for smooth operation. The dust boot and rubber bump stop should be slid off the damper shaft and checked for cracking and deterioration, with replacement if needed. The compressed spring should be carefully lifted from the assembly and set aside. To reassemble, the damper rod should be extended and the rubber bump stop and dust boot should be installed. The compressed coil spring should be placed onto the lower seat of the damper, with the end of the spring against the raised stop. The upper insulator and spring seat should be installed, followed by the upper mount and mounting nut, which should be tightened to the proper torque specifications. The spring compressor tool can then be removed, and the strut spring assembly can be installed.

OEM Pontiac Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

139 Coil Springs found

View related parts
Pontiac Coil Spring, Front Part Number: 15251298
$22.25 MSRP: $77.74
You Save: $55.49 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
Fits the following Pontiac Models:
- Torrent | 2007-2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 22133030
$95.19 MSRP: $169.98
You Save: $74.79 (44%)
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
Fits the following Pontiac Models:
- Grand Prix | 1997-2008 | Base, GT, GT1, GT2, GTP, GXP, SE | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 22076528
Product Specifications
- Other Name: Spring-Rear; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear
Fits the following Pontiac Models:
- Parisienne | 1984-1986 | Base, Brougham | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Safari | 1987-1989 | Base | 8 Cyl 5.0 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 10390024
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
Fits the following Pontiac Models:
- G5 | 2007-2009 | Base, GT | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Coil Spring Part Number: 96653220
Product Specifications
- Other Name: Spring, Rear; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear
Fits the following Pontiac Models:
- G3 | 2009-2010 | Base | 4 Cyl 1.6 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 22197594
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
Fits the following Pontiac Models:
- Bonneville | 2000-2005 | GXP, SE, SLE, SSEi | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 10276574
Product Specifications
- Other Name: Spring, Rear; Coil Spring Set; Coil Springs; Spring, Rear Spring
- Position: Rear
Fits the following Pontiac Models:
- Grand Prix | 1997-2003 | GT, GTP, SE | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 15906534
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
Fits the following Pontiac Models:
- Solstice | 2007-2009 | Base | 4 Cyl 2.4 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 22077147
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 22077066, 22077148
Fits the following Pontiac Models:
- Grand Am | 1992-1998 | GT, SE | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Pontiac Coil Spring Part Number: 92048199
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
Fits the following Pontiac Models:
- GTO | 2004-2006 | Base | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 10035259
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
Fits the following Pontiac Models:
- Bonneville | 1992-1999 | SE, SSE, SSEi | 6 Cyl 3.8 L GAS
View related parts
Pontiac Spring, Rear Part Number: 25530355
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Replaces: 25530352, 25525299, 25530354, 25530344
Fits the following Pontiac Models:
- Bonneville | 1989 | LE, SE, SSE | 6 Cyl 3.8 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 10306378
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
Fits the following Pontiac Models:
- Montana | 2002-2006 | Base, SV6 | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 15219004
$34.38 MSRP: $53.86
You Save: $19.48 (37%)
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: 15207619, 15207618
Fits the following Pontiac Models:
- Torrent | 2006-2007 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Coil Spring, Rear Part Number: 25655481
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
Fits the following Pontiac Models:
- Bonneville | 2000-2005 | GXP, SE, SLE, SSEi | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Pontiac Coil Spring Part Number: 92232662
$139.02 MSRP: $249.36
You Save: $110.34 (45%)
Product Specifications
- Other Name: Spring, Rear; Coil Springs; Spring
- Position: Rear
- Replaces: 92225486, 92202727
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 14034238
Product Specifications
- Other Name: Spring; Coil Springs; Spring, Front Chassis
- Position: Front
Fits the following Pontiac Models:
- Fiero | 1984-1988 | Base, GT, SE, Sport, Value Leader | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Firebird | 1984-1992 | Base, Formula, S/E, Trans Am, Trans Am GTA, Trans Am GTA SE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 14073610
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring, Front Chassis
- Position: Front
Fits the following Pontiac Models:
- Phoenix | 1984 | Base, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Pontiac Coil Spring, Front Part Number: 22197230
Product Specifications
- Other Name: Spring, Front; Coil Springs; Spring; Spring, Front Chassis
- Position: Front
Fits the following Pontiac Models:
- Firebird | 1993-2002 | Base, Formula, Trans Am, Trans Am GT | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Pontiac Coil Spring Part Number: 90272596
Product Specifications
- Other Name: Spring; Coil Springs; Spring Kit, Rear Spring
- Position: Rear
Fits the following Pontiac Models:
- LeMans | 1988-1993 | Aerocoupe, Aerocoupe YL, Base, GSE, LE, SE, Value Leader | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS

| Page 1 of 7 |Next >

1-20 of 139 Results

Pontiac Coil Springs

Choose OEM Coil Springs, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Coil Springs. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Coil Springs ensure that the car has stayed put, absorbed bumps, and yet has not compromised on ride height. Pontiac was developed since the year 1926 as a pioneer to a badge that motorists drove after because of blunt glances and fair power. The wide-track concept created wider postures, making corners flatter and bodies statuesque. Cabin designs oriented all the control to the driver and made long journeys resound to speedy lapses. Smooth bodies combined with engine raving made errands excuses to remain behind the wheel. Annual changes ensured that style was not dulled over the years but instead enhanced the vivaciousness within the line-up. Pontiac kept owners in mind that something pragmatic might still provide a smile each time a traffic light went green. Ads were not for formal introduction and discussion about burning pavements and taking drives on Saturday nights with friends. The use of colors was vivid and dashboards were flashing red as testimony to the spirited motoring ability to fit in a budget. Coil Springs are available in linear progressive and dual rate coils that allow the suspension to suit daily commutes or cargo service. Variable Coil Springs begin soft and become firm such that potholes become gentle while maintaining high speed turns level. Commercial drivers with heavy hauls can replace them with cargo Coil Springs that do not squat without destroying comfort during empty trips. The load is shared between front and rear coils to protect steering response, traction, and body balance over cracked pavements. Others fit threaded sleeves to adjust either up or down stance to allow owners to dial in or out high snow tires or high summer grip. Such flexibility allows Pontiac to be steady whether slithering over school zones or hewing through a mountain.

Pontiac Coil Springs Parts and Q&A

Coil Spring, Rear
22731055
Q: How to replace a Coil Springs and Shock Absorber assembly on Pontiac G6?
A:
If the struts or coil springs show signs of wear such as leaking fluid, loss of damping capability, chipped, sagging or cracked coil springs, it is important to explore all options before starting any work. The strut coil spring components cannot be serviced and must be replaced if there is a problem. However, there may be strut assemblies available that come complete with springs on an exchange basis, which can save time and effort. Before disassembling the vehicle, it is recommended to check the cost and availability of parts. To disassemble the strut and spring assembly, the strut clevis bracket portion should be mounted in a vise. A spring compressor should be installed on the spring following the manufacturer's instructions to relieve pressure from the upper spring seat. The damper shaft nut should be unscrewed while holding the damper shaft from turning. The nut and upper mount should be removed and laid out in the order they were removed. The rubber portion of the upper mount should be checked for cracking and deterioration, and replaced if necessary. The upper spring seat should be removed from the damper shaft and the rubber portion should be inspected for cracking and hardness. The bearing in the spring seat should also be checked for smooth operation. The dust boot and rubber bump stop should be slid off the damper shaft and checked for cracking and deterioration, with replacement if needed. The compressed spring should be carefully lifted from the assembly and set aside. To reassemble, the damper rod should be extended and the rubber bump stop and dust boot should be installed. The compressed coil spring should be placed onto the lower seat of the damper, with the end of the spring against the raised stop. The upper insulator and spring seat should be installed, followed by the upper mount and mounting nut, which should be tightened to the proper torque specifications. The spring compressor tool can then be removed, and the strut spring assembly can be installed.