How to remove and install the rear Steering Knuckle on Pontiac Fiero?

For the removal of the rear knuckle first remove the rear wheel hub and the bearing assembly and for the removal of the toe link rod at the knuckle, use a puller or a suitable tool. After that, the clamp bolt of the knuckle should be unscrewed and detached from the ball stud. Place jack under the lower part of the control arm and unbolt the large bosses that hold the strut to the knuckle. To install, fit the extended knuckle to the balljoint, ensure that the figured lines between the strut bracket and the knuckle are in line before tightening the knuckle to strut mounting bolts to the recommended torque. Screw the toe link rod to the specified torque to the knuckle and complete the nut; install the hub and bearing assembly to the knuckle. At last, take vehicle to a dealer service or an alignment shop and get the camber and the toe checked and adjusted. To take off the toe link rod, it is done at the knuckle and then the nut at the other end of the rod at the cradle fixes the rod to a bracket at the engine cradle bar. Check the degree of exposure of the threads on the rod and based on this check determine the position of adjusting nut on the newly acquired rod. To install it simply screw in the inboard end of the new toe link rod into the mounting bracket at the cradle and then tighten the nut, then screw in the outboard end to the knuckle then tighten the mounting nut to the torque specified by the manufacturer. Take the vehicle to the dealer service department or an alignment shop to get camber, and toe changes.

OEM Pontiac Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

124 Steering Knuckles found

View related parts
Pontiac Knuckle, Driver Side Part Number: 15837478
$248.07 MSRP: $390.32
You Save: $142.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
Fits the following Pontiac Models:
- Torrent | 2007-2008 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Knuckle, Passenger Side Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
Fits the following Pontiac Models:
- Aztek | 2001-2005 | Base, GT, Rally | 6 Cyl 3.4 L GAS
- Grand Prix | 1997-2008 | Base, GT, GT1, GT2, GTP, GXP, SE | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Montana | 1999-2006 | Base, SV6 | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
- Trans Sport | 1997-1998 | Base, Montana | 6 Cyl 3.4 L GAS
View More
View related parts
Pontiac Knuckle Part Number: 92225042
$237.38 MSRP: $373.53
You Save: $136.15 (37%)
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear
- Replaced by: 92287354
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Knuckle, Driver Side Part Number: 19303834
$257.84 MSRP: $405.70
You Save: $147.86 (37%)
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15178872
Fits the following Pontiac Models:
- G6 | 2005 | Base, GT | 6 Cyl 3.5 L GAS
View related parts
Pontiac Knuckle Part Number: 92173659
$357.77 MSRP: $562.93
You Save: $205.16 (37%)
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
Fits the following Pontiac Models:
- GTO | 2005-2006 | Base | 8 Cyl 6.0 L GAS
View related parts
Pontiac Knuckle, Rear Passenger Side Part Number: 23337210
$74.91 MSRP: $117.33
You Save: $42.42 (37%)
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 22873264, 25918953, 25982348
Fits the following Pontiac Models:
- Torrent | 2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Knuckle, Rear Driver Side Part Number: 23337211
$74.91 MSRP: $117.33
You Save: $42.42 (37%)
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaces: 25918954, 22873265
Fits the following Pontiac Models:
- Torrent | 2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Knuckle Part Number: 14012589
Product Specifications
- Other Name: Spindle
Fits the following Pontiac Models:
- Parisienne | 1984-1986 | Base, Brougham | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Safari | 1987-1989 | Base | 8 Cyl 5.0 L GAS
View related parts
Pontiac Knuckle Part Number: 88970119
Product Specifications
- Other Name: Knuckle, Steering
Fits the following Pontiac Models:
- Vibe | 2003-2008 | Base, GT | 4 Cyl 1.8 L GAS
View related parts
Pontiac Knuckle, Passenger Side Part Number: 19184288
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
Fits the following Pontiac Models:
- Vibe | 2009-2010 | AWD, Base, GT | 4 Cyl 2.4 L GAS
View related parts
Pontiac Knuckle, Driver Side Part Number: 19184289
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
Fits the following Pontiac Models:
- Vibe | 2009-2010 | AWD, Base, GT | 4 Cyl 2.4 L GAS
View related parts
Pontiac Knuckle Part Number: 89047805
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear
Fits the following Pontiac Models:
- Torrent | 2006 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle Part Number: 89047806
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear
Fits the following Pontiac Models:
- Torrent | 2006 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle Part Number: 96870493
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle, Steering
- Replaces: 96459242
Fits the following Pontiac Models:
- G3 | 2009-2010 | Base | 4 Cyl 1.6 L GAS
View related parts
Pontiac Knuckle, Passenger Side Part Number: 22702779
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
- Position: Passenger Side
Fits the following Pontiac Models:
- Torrent | 2006 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle, Driver Side Part Number: 22702780
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
- Position: Driver Side
Fits the following Pontiac Models:
- Torrent | 2006 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle, Rear Driver Side Part Number: 18060632
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaces: 18025918
Fits the following Pontiac Models:
- Grand Am | 1999-2005 | GT, GT1, SE, SE1, SE2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle, Rear Passenger Side Part Number: 18060631
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 18025913
Fits the following Pontiac Models:
- Grand Am | 1999-2005 | GT, GT1, SE, SE1, SE2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
View related parts
Pontiac Knuckle, Driver Side Part Number: 15837011
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
Fits the following Pontiac Models:
- Torrent | 2007-2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Knuckle, Rear Passenger Side Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
Fits the following Pontiac Models:
- Aztek | 2001-2005 | Base, GT, Rally | 6 Cyl 3.4 L GAS
- Montana | 2002-2006 | Base, SV6 | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

| Page 1 of 7 |Next >

1-20 of 124 Results

Pontiac Steering Knuckle

Choose OEM Steering Knuckle, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Steering Knuckle. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Steering Knuckle connects the suspension and wheel together enabling sharp turns and smooth vertical movement. Since 1926, Pontiac has trapped drivers with its quest to capture the enthusiasm of the real road, a combination of broad-track attitude and muscular body lines that beg to soar into the corners at any speed with confidence. Since its starting GTO wail to subsequent Firebird flair, Pontiac was ambitious in its styling, screaming motion even before the engine clanked into action. The broad track philosophy increased the spacing of the wheels, increasing stability, and giving Pontiac cars a planted appearance that equated their enthusiastic handling. The gauges and controls were responsive and simple driver-oriented so that attention was always kept forward and each commute became part of a back-road race. In the decades, the badge incorporated sport-tuned suspensions, quick ratio steering, and punchy engines, all of which were decided to enable the transfer of the raw road texture directly to the driver. The Steering Knuckle is a joint at the base of the suspension arms, ball joints, and the hub which allows the wheel to lift up potholes and pivot smoothly in response to every steering action. Since the Steering Knuckle supports the hub, any movement in its stud bores or spindle instantly becomes wobble and therefore it should be checked regularly before the damage spreads. A Steering Knuckle made of forged or cast iron shreds off enormous vertical loads, but has a small shape that does not interfere with brake calipers and maintains unsprung weight to a minimum so the suspension responds faster.

Pontiac Steering Knuckle Parts and Q&A

Steering Knuckle, Passenger Side
25525862
Q: How to remove and install the rear Steering Knuckle on Pontiac Fiero?
A:
For the removal of the rear knuckle first remove the rear wheel hub and the bearing assembly and for the removal of the toe link rod at the knuckle, use a puller or a suitable tool. After that, the clamp bolt of the knuckle should be unscrewed and detached from the ball stud. Place jack under the lower part of the control arm and unbolt the large bosses that hold the strut to the knuckle. To install, fit the extended knuckle to the balljoint, ensure that the figured lines between the strut bracket and the knuckle are in line before tightening the knuckle to strut mounting bolts to the recommended torque. Screw the toe link rod to the specified torque to the knuckle and complete the nut; install the hub and bearing assembly to the knuckle. At last, take vehicle to a dealer service or an alignment shop and get the camber and the toe checked and adjusted. To take off the toe link rod, it is done at the knuckle and then the nut at the other end of the rod at the cradle fixes the rod to a bracket at the engine cradle bar. Check the degree of exposure of the threads on the rod and based on this check determine the position of adjusting nut on the newly acquired rod. To install it simply screw in the inboard end of the new toe link rod into the mounting bracket at the cradle and then tighten the nut, then screw in the outboard end to the knuckle then tighten the mounting nut to the torque specified by the manufacturer. Take the vehicle to the dealer service department or an alignment shop to get camber, and toe changes.