How to remove and install the coil spring and front lower control arm on Pontiac Firebird?

Remove the coil spring and separate the balljoint from the steering knuckle. Check the bushings in the lower control arm before installation; if they are worn or damaged, they can be replaced with the proper tools. Installation follows the reverse of the removal procedure, ensuring that when attaching the lower control arm to the front crossmember, the front leg is installed first, followed by the rear leg. When the bolts are finally tightened, the vehicle must be at normal ride height, and all bolts should be tightened to the specified torque.

How to replace the front Ball Joint and Control Arm on Pontiac Fiero?

The lower balljoint is welded to the lower control arm and cannot be serviced separately, necessitating the replacement of the entire lower control arm if the lower balljoint requires replacement. To begin removal, loosen the wheel lug nuts without removing them, then raise the front of the vehicle and support it on jackstands before removing the tire and wheel assembly. Disconnect the stabilizer bar from the lower control arm, ensuring to disconnect only the necessary end if only one lower control arm is being removed, or remove the entire stabilizer bar if both are being replaced. Next, disconnect the tie-rod from the steering knuckle and the shock absorber at the lower control arm. Support the lower control arm with a floor jack, remove the cotter key from the lower balljoint stud, and loosen the castellated nut without removing it. Use a pickle fork tool to break the balljoint loose from the knuckle, then remove the balljoint nut and swing the knuckle and hub out of the way. Loosen the lower control arm pivot bolts, install a chain over the upper control arm and through the coil spring for safety, and slowly lower the jack to remove the chain and withdraw the spring. Remove the pivot bolts at the frame rail and crossmember to take out the lower control arm, noting that removal of the forward pivot bolt may require loosening or removing the steering assembly mounting bolts if the pivot bolts have forward-facing heads. For installation, position the lower control arm and install the pivot bolts at the frame rail and crossmember, tightening them slightly. Inspect the rubber control arm bumper on the crossmember and replace it if worn or damaged. Position the spring, install it into the upper pocket, and align the bottom with the lower control arm pocket, possibly needing assistance to compress the spring enough to slide it over the lower control arm seat. Use the floor jack to raise the lower control arm and compress the coil spring, then install the balljoint in the steering knuckle, tightening the nut to the specified torque. Connect the stabilizer bar and tie-rod, tightening their respective bolts to the specified torque, and install the shock absorber on the lower control arm, also tightening the bolt to the specified torque. If the steering rack assembly bolts were removed or loosened, replace them with new bolts and tighten to the specified torque. Finally, tighten the lower control pivot bolts, install the tire and wheel assembly, and tighten the wheel lug nuts finger tight before lowering the vehicle and tightening the lug nuts to the specified torque, with a recommendation to have the wheels aligned after reassembling the suspension.

OEM Pontiac Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

164 Control Arms found

View related parts
Pontiac Lower Control Arm, Rear Passenger Side Part Number: 20763133
$138.03 MSRP: $336.80
You Save: $198.77 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Passenger Side
Fits the following Pontiac Models:
- Torrent | 2008-2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Lower Control Arm Part Number: 95975942
$93.72 MSRP: $148.79
You Save: $55.07 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Front Lower
- Replaces: 96870466, 96535082, 96815894
Fits the following Pontiac Models:
- G3 | 2009-2010 | Base | 4 Cyl 1.6 L GAS
View related parts
Pontiac Lower Control Arm Part Number: 22947664
$176.08 MSRP: $299.78
You Save: $123.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Front Lower
- Replaces: 10328898, 10301556, 10301554, 10328900, 15293667, 15293660, 15293665, 20977507, 25853335, 10291505, 10287710, 10348613, 10303056, 10348611
Fits the following Pontiac Models:
- Grand Prix | 2004-2008 | Base, GT, GT1, GT2, GTP, GXP | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Pontiac Lower Control Arm, Passenger Side Part Number: 22947665
$71.17 MSRP: $117.26
You Save: $46.09 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Replaces: 10301561, 10301564, 10243841, 25853332, 10327401, 10300978, 10348614, 10427740, 10328901, 15293668, 15293662, 20977508, 10344931, 25853336
Fits the following Pontiac Models:
- Grand Prix | 2004-2008 | Base, GT, GT1, GT2, GTP, GXP | 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Montana | 1999-2005 | Base | 6 Cyl 3.4 L GAS
- Trans Sport | 1997-1998 | Base, Montana | 6 Cyl 3.4 L GAS
View More
View related parts
Pontiac Lower Control Arm Part Number: 92250640
$184.00 MSRP: $292.15
You Save: $108.15 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Rear Lower Control Arm
- Position: Front Rear Lower
- Replaces: 92244050, 92183309
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Trailing Arm, Green Line, Rear Passenger Side Part Number: 15292403
$67.17 MSRP: $106.63
You Save: $39.46 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Trailing Arm
- Position: Rear Passenger Side
- Replaces: 10379364, 22724672
Fits the following Pontiac Models:
- G6 | 2005-2010 | Base, GT, GTP, GXP | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Lower Control Arm Part Number: 92250641
$184.00 MSRP: $292.15
You Save: $108.15 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Rear Lower Control Arm
- Position: Front Rear Lower
- Replaces: 92244051, 92183310
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Upper Control Arm Part Number: 92458015
$596.34 MSRP: $1079.35
You Save: $483.01 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear Upper
- Replaces: 92199104, 92199105
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Control Arm, Passenger Side Part Number: 10114664
$202.83 MSRP: $334.13
You Save: $131.30 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Suspension Control Arm; Lower Control Arm; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
Fits the following Pontiac Models:
- Grand Prix | 1989-1991 | Base, GT, LE, Mclaren, SE, STE | 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Pontiac Lower Control Arm, Rear Driver Side Part Number: 20763134
$204.95 MSRP: $337.63
You Save: $132.68 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear Driver Side
Fits the following Pontiac Models:
- Torrent | 2008-2009 | Base, GXP | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Pontiac Control Arm, Front Upper Driver Side Part Number: 19416902
$229.09 MSRP: $377.38
You Save: $148.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Front Upper Control; Upper Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Upper Driver Side
- Replaces: 12543947, 12546747, 12376265, 19133653
Fits the following Pontiac Models:
- Bonneville | 1984-1986 | Base, Brougham, LE | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- Grand Prix | 1985-1987 | Base, Brougham, LE | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Pontiac Lower Control Arm, Front Passenger Side Part Number: 25554671
$48.00 MSRP: $79.07
You Save: $31.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Front Lower Control-Right; Control Arm
- Position: Front Lower Passenger Side
- Replaced by: 19149203
Fits the following Pontiac Models:
- Bonneville | 1991 | LE, SE, SSE | 6 Cyl 3.8 L GAS
View related parts
Pontiac Lower Control Arm, Driver Side Part Number: 15218621
$92.92 MSRP: $153.07
You Save: $60.15 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
Fits the following Pontiac Models:
- Montana | 2005-2006 | SV6 | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Lower Control Arm, Driver Side Part Number: 15217438
$163.46 MSRP: $259.53
You Save: $96.07 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Driver Side
- Replaces: 22598137, 22603949, 22611126, 22645746, 22645797
Fits the following Pontiac Models:
- Sunfire | 1995-2005 | Base, GT, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Control Arm, Passenger Side Part Number: 19149203
$48.00 MSRP: $79.07
You Save: $31.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Lower Control Arm; Lower Control Arm Assembly; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Replaces: 25554671, 14089118, 25554675
Fits the following Pontiac Models:
- Bonneville | 1987-1999 | Base, LE, SE, SSE, SSEi | 6 Cyl 3.8 L GAS
View related parts
Pontiac Control Arm, Rear Part Number: 10251391
$119.21 MSRP: $189.27
You Save: $70.06 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm
- Position: Rear
Fits the following Pontiac Models:
- Firebird | 1993-2002 | Base, Formula, Trans Am, Trans Am GT | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Pontiac Trailing Arm Part Number: 92287746
$63.04 MSRP: $103.83
You Save: $40.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear
- Replaces: 92159168, 92258169, 92231256
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base, GT, GXP | 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Pontiac Upper Control Arm, Rear Passenger Side Part Number: 15232837
$58.40 MSRP: $215.77
You Save: $157.37 (73%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear Passenger Side
- Replaces: 10412908
Fits the following Pontiac Models:
- Aztek | 2001-2005 | Base, GT, Rally | 6 Cyl 3.4 L GAS
- Montana | 2002-2006 | Base, SV6 | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Lower Control Arm, Passenger Side Part Number: 15217439
$163.46 MSRP: $259.53
You Save: $96.07 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Replaces: 22645741, 22611127, 22603948, 22645745, 22645796, 22598136
Fits the following Pontiac Models:
- Sunfire | 1995-2005 | Base, GT, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Control Arm, Front Upper Passenger Side Part Number: 22204673
Product Specifications
- Other Name: Arm Assembly-Front Upper Control (Right-Hand); Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Upper Control Arm; Arm, Steering Knuckle Upper & Lower Control
- Position: Front Upper Passenger Side
- Replaces: 22156460
Fits the following Pontiac Models:
- Firebird | 1993-2002 | Base, Formula, Trans Am, Trans Am GT | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 9 |Next >

1-20 of 164 Results

Pontiac Control Arm

Choose OEM Control Arm, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Control Arm. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Control Arm connects the wheel with the suspension and maintains alignment and stability during a ride on any road. Pontiac was born in 1926 and established a reputation of wide track stance, which gave all the models a swaggered stance. Over decades, drivers sought excitement as Pontiac combined aggressive sheet metal with cabins that cried to drive faster. Despite halting production, Pontiac still points to spirited handling, achievable speed and a recalcitrant disposition to feel uncool. To drivers, there are screaming V8s, rally stripes, and dashboards leaned at them, which evidence that the badge was more concerned with excitement than fluff. The highway was sincere, trust was built, and owners believed the cars could punch above their price and its anticipations without cheats. A Control Arm attacks the abuse of the road directly, pivoting on bushings so that the arc of the wheel is a perfect one, and the chassis remains stable and the steering wheel remains straight, rather than pulling or shaking your hands on the bumps of a bad road. Wearing a Control Arm, vibration, clunks and struggling to maintain wakefulness occur as the joint fails to stabilize the tire. Change to a new Control Arm and the vehicle jerks back to straight tracking, silent turnaround and assertive braking.

Pontiac Control Arm Parts and Q&A

Control Arm
12505472
Q: How to remove and install the coil spring and front lower control arm on Pontiac Firebird?
A:
Remove the coil spring and separate the balljoint from the steering knuckle. Check the bushings in the lower control arm before installation; if they are worn or damaged, they can be replaced with the proper tools. Installation follows the reverse of the removal procedure, ensuring that when attaching the lower control arm to the front crossmember, the front leg is installed first, followed by the rear leg. When the bolts are finally tightened, the vehicle must be at normal ride height, and all bolts should be tightened to the specified torque.
Upper Control Arm, Front Driver Side
10023748
Q: How to replace the front Ball Joint and Control Arm on Pontiac Fiero?
A:
The lower balljoint is welded to the lower control arm and cannot be serviced separately, necessitating the replacement of the entire lower control arm if the lower balljoint requires replacement. To begin removal, loosen the wheel lug nuts without removing them, then raise the front of the vehicle and support it on jackstands before removing the tire and wheel assembly. Disconnect the stabilizer bar from the lower control arm, ensuring to disconnect only the necessary end if only one lower control arm is being removed, or remove the entire stabilizer bar if both are being replaced. Next, disconnect the tie-rod from the steering knuckle and the shock absorber at the lower control arm. Support the lower control arm with a floor jack, remove the cotter key from the lower balljoint stud, and loosen the castellated nut without removing it. Use a pickle fork tool to break the balljoint loose from the knuckle, then remove the balljoint nut and swing the knuckle and hub out of the way. Loosen the lower control arm pivot bolts, install a chain over the upper control arm and through the coil spring for safety, and slowly lower the jack to remove the chain and withdraw the spring. Remove the pivot bolts at the frame rail and crossmember to take out the lower control arm, noting that removal of the forward pivot bolt may require loosening or removing the steering assembly mounting bolts if the pivot bolts have forward-facing heads. For installation, position the lower control arm and install the pivot bolts at the frame rail and crossmember, tightening them slightly. Inspect the rubber control arm bumper on the crossmember and replace it if worn or damaged. Position the spring, install it into the upper pocket, and align the bottom with the lower control arm pocket, possibly needing assistance to compress the spring enough to slide it over the lower control arm seat. Use the floor jack to raise the lower control arm and compress the coil spring, then install the balljoint in the steering knuckle, tightening the nut to the specified torque. Connect the stabilizer bar and tie-rod, tightening their respective bolts to the specified torque, and install the shock absorber on the lower control arm, also tightening the bolt to the specified torque. If the steering rack assembly bolts were removed or loosened, replace them with new bolts and tighten to the specified torque. Finally, tighten the lower control pivot bolts, install the tire and wheel assembly, and tighten the wheel lug nuts finger tight before lowering the vehicle and tightening the lug nuts to the specified torque, with a recommendation to have the wheels aligned after reassembling the suspension.