Choose OEM MAP Sensor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Oldsmobile's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Oldsmobile MAP Sensor. You can shop at highly competitive prices and protect your budget. All our genuine Oldsmobile parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Oldsmobile MAP Sensor assures the smooth running of the engine by measuring the pressure in the manifold and instructing the computer to find the balance between fuel and spark to provide clean power. Since 1897 Oldsmobile has led the automotive innovation, firstly with the Curved Dash which demonstrated that a family could own a car, and then with the breakthrough of the moving assembly line which accelerated manufacturing and retained low prices. In 1940, the Hydra-Matic automatic transmission in the brand permitted drivers easy sailing in the traffic without the clutch in the car and subsequent models had sound and efficient engines, quiet cabins, and road etiquettes, which made the long journeys comfortable. Oldsmobile has had generations of drivers who believed in dependability, comfort and consistent innovation that ensured they made travelling throughout the day easier and safer. The small Oldsmobile MAP Sensor, which is situated on the intake manifold (or close to it), measures absolute pressure in order to allow the control module to assess air density in real-time, adjust mixtures and cut emissions. The replacement of MAP Sensor is not difficult, one has to switch off ignition and disconnect battery, locate the piece on the manifold, press a tab and unplug a wiring harness, remove the screws or bolts and pull out the older one. Check in the port, clean the sealing surface, insert the new sensor with its O-ring, screw the lockers in, snap the connector back until it clips, reconnect the battery, start the car, and ensure that the idle is steady, the MAP Sensor data appears to be stable, and all warning lights have cleared.