Make sure this part fits

GM 19418807
M.A.P. Sensor

1997-2009 GM

Customer Questions & Expert Answers (22)
GM 19418807 M.A.P. Sensor
  • Part Description
    Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
  • Replaces
    12614970, 16212460
  • Manufacturer
    General Motors
Make sure this part fits
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2006-2007 Buick RendezvousCX, CXL6 Cyl 3.5 L GAS
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2004-2007 Cadillac CTSV8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    1998-2002 Chevrolet CamaroZ28, Z28 SS8 Cyl 5.7 L GAS
    1998-2005 Chevrolet CavalierBase, LS, LS Sport, RS4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    2005-2008 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2004-2007 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
    1997-2008 Chevrolet Corvette427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z068 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 7.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19418807 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19418807 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done after installing the MAP sensor for the 2007 Buick Rainier? Posted by Customer
    A:
    Install the MAP sensor retainer before reconnecting the electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the final step in the replacement process for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the intake manifold cover.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the torque specification for tightening the bolt for the 2005 Buick Terraza? Posted by Customer
    A:
    Tighten the bolt to 10 N.m (89 lb in) as per the Fastener Notice in Service Precautions.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after turning the ignition OFF for the 2005 Cadillac CTS? Posted by Customer
    A:
    Remove the sensor electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the first step to replace the MAP sensor for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Remove the air cleaner outlet resonator and the accelerator cable bracket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the first step to replace the Manifold Absolute Pressure Sensor for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    First, remove the throttle body.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    How should the MAP sensor seal be prepared for installation for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    Lightly lubricate the MAP sensor seal with clean engine oil to facilitate the process.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    How do you remove the MAP sensor for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Carefully open the MAP sensor retaining tabs just enough to remove the MAP sensor from the vacuum source, then pull the MAP sensor straight out.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after removing the throttle body for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Disconnect the MAP sensor electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after installing the MAP sensor for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Reconnect the MAP sensor harness connector, position the PCV hose assembly for reassembly, and insert it into the mounting brackets.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the next step after positioning the MAP sensor for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Attach the MAP sensor retaining bracket and bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What are the next steps after removing the spark plug wire clip for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Take out the upper intake manifold bolts and remove the MAP sensor and bracket along with the MAP sensor seal from the upper intake manifold.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the first step to replace the MAP sensor for the 2006 Chevrolet HHR? Posted by Customer
    A:
    First, remove the throttle body.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after disconnecting the electrical connector for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Remove the MAP sensor attaching screw and take out the MAP sensor along with the MAP sensor seal from the upper intake manifold.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    How should the MAP sensor grommet be prepared for installation for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Lubricate the MAP sensor grommet with clean engine oil if required.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after turning off the ignition for the 2003 Chevrolet S10? Posted by Customer
    A:
    Disconnect the MAP sensor harness connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the final step in reconnecting the MAP sensor for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Reconnect the electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be removed after disconnecting the electrical connector for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Remove the MAP sensor retaining bolt and bracket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What is the final step in the replacement process for the 2007 GMC Canyon? Posted by Customer
    A:
    Reconnect the MAP sensor electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after turning off the ignition for the 2007 GMC Envoy? Posted by Customer
    A:
    Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    Q:
    What should be done after turning off the ignition for the 2003 GMC Sonoma? Posted by Customer
    A:
    Disconnect the MAP sensor harness connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this MAP Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM M.A.P. Sensor 19418807 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19418807 M.A.P. Sensor is available in the market under the name GM MAP Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19418807 M.A.P. Sensor fits certain Chevrolet S10, Colorado, Malibu models, as well as GMC Canyon, Envoy, Sonoma. Additionally, it is compatible with Cadillac CTS and Buick Rainier, Rendezvous, Terraza models.
The original GM component designated by Manufacturer Part Number 19418807 maintains top performance when functioning as the Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor unit. The component 19418807 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19418807 has available replacement options 12614970, 16212460. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.