How to replace the Fuel Filler Hose on a 15 Reg Cab with a 26 Gal Tank on GMC Sierra 1500?

Begin the 15 reg cab Fuel Tank filler pipe replacement with the body torx(R) screws and pushpin retainer of the Fuel Tank filler housing then move to the Fuel Tank filler housing bolts connected to the Fuel Tank fill pipe. Next raise your vehicle to a level position in the middle of its height after finishing the removal of the Fuel Tank filler housing. Detach the ground wire bolt from the Fuel Tank fill pipe as the next step after removing the Fuel Tank fill pipe ground wire. First open the axle vent hose clip on the fuel fill pipe bracket before removing the rear axle vent hose from the clip. Then reposition the Fuel Tank fill pipe ground wire and chassis harness ground wire. The first step includes disconnection of the fuel fill pipe recirculation line quick connect fitting from the evaporative emission (EVAP) rear hose followed by loosening the Fuel Tank fill pipe clamp at the Fuel Tank. Finally, remove the Fuel Tank fill pipe while capping the Fuel Tank opening to prevent contaminants from entering. Install the Fuel Tank fill pipe by first removing the cap from the Fuel Tank opening then placing the fill pipe correctly before torquing the clamp to 2.5 nm (22 lb in). Route the fuel fill pipe recirculation line quick connect fitting to attach it on the evap rear hose then guide the rear axle vent hose to secure on the fuel fill pipe bracket before closing the axle vent hose clip. Insert the chassis harness ground wire together with the Fuel Tank fill pipe ground wire to the frame bracket before putting the ground wire anti-rotation tab into the frame hole and fastening the ground wire bolt at 9 nm (80 lb in). Lower the vehicle before installing the Fuel Tank filler housing and the bolts which attach to the Fuel Tank fill pipe while tightening them to 2.3 nm (20 lb in). For the tank filler housing installation you need to secure torx(R) screws and a pushpin retainer with screw tension at 2.3 nm and 20 lb in.

How to replace the fuel filler hose on GMC Acadia?

A safe procedure to replace the Fuel Filler Hose requires checking for smoking conditions first before disconnecting the negative Battery Cable unless battery voltage is required. First remove the fuel fill cap followed by taking out the Fuel Tank fill pipe housing from its bolts to drain the Fuel Tank. Begin by removing the left rear wheel followed by its tire before continuing with removing the left rear wheelhouse liner panel. The first step requires you to remove the Fuel Tank fill pipe bracket bolt then extract the Fuel Tank fill pipe assembly out of the vehicle. The maintenance technician should loosen the Fuel Tank fill hose clamp for hose removal. To install the Fuel Tank fill hose place it properly and tighten the Fuel Tank fill hose clamp to 3.3 n.m (29 lb in). Position the fill hose with the notch facing the Fuel Tank tab before installing the Fuel Tank fill hose to its proper position on the tank. The evaporative emission (EVAP) canister vent rear pipe quick connect fitting should be attached to the recirculation line on the Fuel Tank fill pipe while the Fuel Tank fill hose clamp should be tightened to 3.3 n.m (29 lb in). Finalize the installation of the Fuel Tank fill pipe bracket bolt by tightening it to 12 n.m (106 lb in). Lower the automobile while putting back the left rear wheelhouse liner panel followed by the left wheel and tire. As the last step install the Fuel Tank fill pipe housing while fastening the Fuel Tank fill pipe bolts with 2 n.m (18 lb in) torque and secure the fuel fill cap.

OEM GMC Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

264 Fuel Filler Hoses found

View related parts
GMC Filler Neck Part Number: 84696025
$202.60 MSRP: $302.83
You Save: $100.23 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 84315254, 84392894, 84090500, 84224654
Fits the following GMC Models:
- Yukon | 2017-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Vent Hose Part Number: 23113673
$21.14 MSRP: $38.26
You Save: $17.12 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Evaporation Emission System (Fuel Tank End); Hose, Evaporation Emission System(Fuel Tank End)
Fits the following GMC Models:
- Yukon | 2015-2016 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Neck Part Number: 22951217
$296.94 MSRP: $443.85
You Save: $146.91 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 20964888, 25852920, 20878553, 15850897, 25836088
Fits the following GMC Models:
- Yukon | 2007-2014 | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Neck Part Number: 84695998
$202.60 MSRP: $302.83
You Save: $100.23 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 84315252, 84392892, 84090498, 84224656
Fits the following GMC Models:
- Yukon | 2017-2020 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Neck Part Number: 84861900
$202.60 MSRP: $302.83
You Save: $100.23 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaced by: 85585193
- Replaces: 84566467
Fits the following GMC Models:
- Sierra 2500 HD | 2021-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2021-2023 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Filler Neck Part Number: 84707997
$47.35 MSRP: $70.46
You Save: $23.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 84626776
Fits the following GMC Models:
- Sierra 1500 | 2019-2021 | Base | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Vent Hose Part Number: 84138743
$23.40 MSRP: $35.31
You Save: $11.91 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Hose, Evaporation Emission System(Fuel Tank End)
Fits the following GMC Models:
- Sierra 1500 | 2017-2019 | AT4, Base, Denali, Elevation, SLE, SLT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Vent Hose Part Number: 84224141
$32.45 MSRP: $50.79
You Save: $18.34 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Hose, Evaporation Emission System(Fuel Tank End)
- Replaces: 23375749
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Filler Neck Part Number: 84868023
$89.66 MSRP: $133.42
You Save: $43.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaced by: 85552848
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, Base, Elevation, Pro, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX
View related parts
GMC Filler Neck Part Number: 87844676
$108.26 MSRP: $161.10
You Save: $52.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Pipe, Fuel Tank Filler
- Replaced by: 85773933
- Replaces: 84838586, 84694036, 84766597
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Filler Neck Part Number: 85552849
$113.69 MSRP: $169.92
You Save: $56.23 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Filler Pipe
- Replaced by: 85065149
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Neck Part Number: 85552852
$123.60 MSRP: $184.75
You Save: $61.15 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Filler Pipe
- Replaced by: 85065151
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Hose Part Number: 84542616
$64.75 MSRP: $96.35
You Save: $31.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Replaces: 84091692
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | Base, Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Vent Hose Part Number: 23375751
$14.80 MSRP: $22.31
You Save: $7.51 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Hose, Evaporation Emission System(Fuel Tank End)
Fits the following GMC Models:
- Sierra 1500 | 2017-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Filler Neck Part Number: 84871958
$103.16 MSRP: $153.52
You Save: $50.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaced by: 85552850
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Vent Hose Part Number: 84224140
$43.68 MSRP: $65.88
You Save: $22.20 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Hose, Evaporation Emission System(Fuel Tank End)
- Replaces: 84133745
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Vent Hose Part Number: 84100072
$20.35 MSRP: $30.70
You Save: $10.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Fuel Tank Filler Vent; Hose, Evaporation Emission System(Fuel Tank End)
- Replaces: 22802073
Fits the following GMC Models:
- Sierra 1500 | 2012-2016 | Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2012-2013 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2012-2013 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Filler Hose Part Number: 22951226
$58.31 MSRP: $86.76
You Save: $28.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Replaces: 15944405
Fits the following GMC Models:
- Sierra 1500 | 2007-2011 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2007-2011 | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Filler Neck Part Number: 22827849
$172.42 MSRP: $257.73
You Save: $85.31 (34%)
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
Fits the following GMC Models:
- Yukon | 2016 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Filler Hose Part Number: 84533161
$45.91 MSRP: $68.32
You Save: $22.41 (33%)
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Replaces: 23375742, 84240990
Fits the following GMC Models:
- Sierra 1500 | 2017-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS

| Page 1 of 14 |Next >

1-20 of 264 Results

GMC Fuel Filler Hose

Choose OEM Fuel Filler Hose, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Fuel Filler Hose. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Fuel Filler Hose directs fuel into the tank in a clean manner which reduces leaking and waste. GMC manufactures pickups and SUVs which drag lumber on Monday and children on Tuesday without tears. Its frames remain stiff even with significantly weighty loads, and even the powertrains shake off steep mountains in midsummer heat. Drivers receive surround image, hitch guiding and alert beeps which talk up before trouble increases. Road noise is always kept off the road and the cabin is always relaxed even when paving falls out. GMC continues to refine these fundamentals every year which makes them enduring because of the continuous minor improvements. Prototypes are also tested in testing yards by subjecting them to salt spray, deep potholes and heat in deserts until they no longer show weak spots. The outcome is a lineup that is compatible with grind, cross country pulling and mud as well. Proprietors such as that toughness come without sacrificing touchscreen technology or plush leather during long travel distances. The Fuel Filler Hose is made of heavy, corrosion resistant rubber mixed with synthetic fiber, attaching to the filler neck using solid clamps and seals the hose to prevent vapor loss so that even over years of refueling the hose will not drip, the fumes will not escape the car and the onboard computer will maintain its emission levels at low numbers. The hose is flexible to shake off frame twist but is also stiff to prevent kinks which choke the tank. Since the Fuel Filler Hose is designed to fit a variety of production years, the driver can fit it easily and continue moving on. The severe heat, winter salt and shaking attempt to split cheaper parts but this line snickers them off mile after mile.

GMC Fuel Filler Hose Parts and Q&A

Filler Hose
22951224
Q: How to replace the Fuel Filler Hose on a 15 Reg Cab with a 26 Gal Tank on GMC Sierra 1500?
A:
Begin the 15 reg cab Fuel Tank filler pipe replacement with the body torx(R) screws and pushpin retainer of the Fuel Tank filler housing then move to the Fuel Tank filler housing bolts connected to the Fuel Tank fill pipe. Next raise your vehicle to a level position in the middle of its height after finishing the removal of the Fuel Tank filler housing. Detach the ground wire bolt from the Fuel Tank fill pipe as the next step after removing the Fuel Tank fill pipe ground wire. First open the axle vent hose clip on the fuel fill pipe bracket before removing the rear axle vent hose from the clip. Then reposition the Fuel Tank fill pipe ground wire and chassis harness ground wire. The first step includes disconnection of the fuel fill pipe recirculation line quick connect fitting from the evaporative emission (EVAP) rear hose followed by loosening the Fuel Tank fill pipe clamp at the Fuel Tank. Finally, remove the Fuel Tank fill pipe while capping the Fuel Tank opening to prevent contaminants from entering. Install the Fuel Tank fill pipe by first removing the cap from the Fuel Tank opening then placing the fill pipe correctly before torquing the clamp to 2.5 nm (22 lb in). Route the fuel fill pipe recirculation line quick connect fitting to attach it on the evap rear hose then guide the rear axle vent hose to secure on the fuel fill pipe bracket before closing the axle vent hose clip. Insert the chassis harness ground wire together with the Fuel Tank fill pipe ground wire to the frame bracket before putting the ground wire anti-rotation tab into the frame hole and fastening the ground wire bolt at 9 nm (80 lb in). Lower the vehicle before installing the Fuel Tank filler housing and the bolts which attach to the Fuel Tank fill pipe while tightening them to 2.3 nm (20 lb in). For the tank filler housing installation you need to secure torx(R) screws and a pushpin retainer with screw tension at 2.3 nm and 20 lb in.
Filler Hose
15842789
Q: How to replace the fuel filler hose on GMC Acadia?
A:
A safe procedure to replace the Fuel Filler Hose requires checking for smoking conditions first before disconnecting the negative Battery Cable unless battery voltage is required. First remove the fuel fill cap followed by taking out the Fuel Tank fill pipe housing from its bolts to drain the Fuel Tank. Begin by removing the left rear wheel followed by its tire before continuing with removing the left rear wheelhouse liner panel. The first step requires you to remove the Fuel Tank fill pipe bracket bolt then extract the Fuel Tank fill pipe assembly out of the vehicle. The maintenance technician should loosen the Fuel Tank fill hose clamp for hose removal. To install the Fuel Tank fill hose place it properly and tighten the Fuel Tank fill hose clamp to 3.3 n.m (29 lb in). Position the fill hose with the notch facing the Fuel Tank tab before installing the Fuel Tank fill hose to its proper position on the tank. The evaporative emission (EVAP) canister vent rear pipe quick connect fitting should be attached to the recirculation line on the Fuel Tank fill pipe while the Fuel Tank fill hose clamp should be tightened to 3.3 n.m (29 lb in). Finalize the installation of the Fuel Tank fill pipe bracket bolt by tightening it to 12 n.m (106 lb in). Lower the automobile while putting back the left rear wheelhouse liner panel followed by the left wheel and tire. As the last step install the Fuel Tank fill pipe housing while fastening the Fuel Tank fill pipe bolts with 2 n.m (18 lb in) torque and secure the fuel fill cap.