A technician must start the replacement of the driver door lock switch by removing 2 screws that secure the switch plate assembly to the door trim panel. The switch plate front section needs lifting to release the clip before removing the switch plate from its opening in the door trim panel. remove the switch plate assembly (3) along with its electrical connectors (4, 3) from the vehicle by disconnecting the connectors (4, 3) from the switches (2, 5). Switches must be removed from the plate when replacing them independently yet the switch plate requires keeping switches in place for transfer. To begin with attach the switches (2, 5) onto the switch plate after which establish an electrical connection between the switches (2, 5) and connectors (3, 4). Use two screws to integrate the switch plate assembly into the door trim panel while tightening the screws to 2 N.m (18 lb in).