The first step to replace the front lower Control Arm Bushing is to remove the front lower Control Arm assembly. Next, place the lower Control Arm in a soft jawed vise. Mount the j 2619-01 (J 2619-01) slide hammer and adapter and the ch-48107 (CH-48107) bushing remover and installer and place them on the lower Control Arm Bushing. Utilize the j 2619-01 (J 2619-01) and ch-48107 (CH-48107) to remove the front lower Control Arm Bushing, and then ch-48107 (CH-48107) to remove the rear lower Control Arm Bushing with j 5590 (J 5590) installer and remover. For installation, align the front and rear bushings in the Control Arm, then align the ch-48107 (CH-48107) on the front bushing. Squeeze the front and rear bushings in the vise until seated, then retrieve the lower Control Arm from the vice, and remove the ch-48107 (CH-48107) from the front bushing before you install the lower Control Arm back in the vehicle.