How to replace the front brake caliper bracket on GMC Sierra 1500?

Before replacing the front Brake Caliper Bracket you must support the brake caliper with heavy mechanic's wire or equivalent tool that allows the hydraulic flexible brake hose to stay connected to prevent damage. When replacing the front Brake Caliper Bracket keep the hydraulic brake flexible hose connected while taking out the brake pads and anti-rattle clips from the mounting bracket. Begin by removing two Brake Caliper Bracket mounting bolts followed by the caliper bracket itself while cleaning inside ends and mounting surface of all contaminants. During Brake Caliper Bracket installation position the bracket back in place while removing all traces of original adhesive patch and cleaning bolt threads with denatured alcohol before applying threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the threads. For the 15 series use 121 ft. Lbs. Torque after tightening caliper bracket bolts while the 25 and 35 series require 221 ft. Lbs. Torque on these bolts. Smoothly slide the pads against the rotor until they make contact before placing the brake pads and anti-rattle clips back in place. You will finish the brake caliper installation by installing the tire-wheels-assemblies and dropping the vehicle to the ground before applying the brake pedal to a 2/3 distance and returning it to zero position. Wait 15 seconds and perform the procedure again until the brake pedal achieves full firmness which confirms proper Brake Caliper Piston and pad settlement.

How to Properly Install a Brake Caliper Bracket on a GMC Yukon?

From a raised and supported 1500 series vehicle position disconnect the tire and wheel assembly. Secure the brake caliper with heavy mechanic wire during brake brake hose connection to avoid brake fluid leaks and hose damage at its point of separation. Take out the caliper while supporting it according to the established method but do not detach the brake hose before starting this process. Mark the Brake Pad placement for new installation. Remove brake pads and springs before taking off both bracket mounting bolts and the entire bracket assembly. When adding the Brake Caliper Bracket always eliminate all traces of the old adhesive patch and apply threadlocker gm p/n 12345493 (Canada 10953488) to the threads before screwing on the bolts. Attache the Brake Caliper Bracket bolts and fasten them to 200 n.m (148 pounds feet) torque. Reposition the Brake Pad springs and brake pads exactly as you found them earlier. Put the brake caliper onto its bracket and mount back the tire and wheel unit. Replace brake fluid in the master cylinder tank when needed with fresh product until the reservoir reaches its specified mark.

OEM GMC Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Brake Caliper Brackets found

View related parts
GMC Caliper Support Part Number: 20909263
$53.88 MSRP: $97.54
You Save: $43.66 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
Fits the following GMC Models:
- Sierra 2500 HD | 2011-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2011-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Caliper Support, Passenger Side Part Number: 15855617
$65.06 MSRP: $117.77
You Save: $52.71 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Passenger Side
Fits the following GMC Models:
- Acadia | 2007-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
View related parts
GMC Caliper Support, Front Part Number: 13588988
$29.13 MSRP: $54.69
You Save: $25.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Caliper Mount Part Number: 88965672
$74.69 MSRP: $116.99
You Save: $42.30 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following GMC Models:
- Acadia | 2007-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
- Envoy | 2006-2008 | Denali | 8 Cyl 5.3 L GAS
- Envoy XL | 2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
GMC Caliper Mount Part Number: 88965679
$80.13 MSRP: $114.13
You Save: $34.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following GMC Models:
- Acadia | 2007-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
- Envoy | 2006-2008 | Denali | 8 Cyl 5.3 L GAS
- Envoy XL | 2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View More
View related parts
GMC Caliper Support Part Number: 19151004
$75.01 MSRP: $135.76
You Save: $60.75 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Bracket
- Position: Rear
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Caliper Support Part Number: 84998797
$60.95 MSRP: $114.46
You Save: $53.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Bracket Kit, Wheel Brake Cylinder/Caliper
- Replaces: 84715017
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Caliper Support, Rear Part Number: 85512090
$67.18 MSRP: $121.60
You Save: $54.42 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 84747357
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
GMC Caliper Support, Passenger Side Part Number: 86779266
$68.53 MSRP: $128.70
You Save: $60.17 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Front Brake Caliper; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
Fits the following GMC Models:
- Hummer EV Pickup | 2022-2023 | 3X, Edition 1 | BATTERY EV (EV/BEV)
View related parts
GMC Caliper Support Part Number: 13542416
$44.49 MSRP: $80.53
You Save: $36.04 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket
- Position: Front
- Replaced by: 13555623
Fits the following GMC Models:
- Acadia | 2021-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Caliper Support, Front Part Number: 19210989
$66.54 MSRP: $124.96
You Save: $58.42 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 89040315
Fits the following GMC Models:
- Canyon | 2004-2008 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Caliper Support, Rear Driver Side Part Number: 13595924
$59.48 MSRP: $97.97
You Save: $38.49 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Caliper Support, Rear Passenger Side Part Number: 13595925
$59.46 MSRP: $97.94
You Save: $38.48 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Caliper Mount Part Number: 84685101
$31.33 MSRP: $49.06
You Save: $17.73 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Rear
Fits the following GMC Models:
- Canyon | 2021-2022 | AT4, Denali, Elevation, Elevation Standard | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Caliper Bracket, Rear Part Number: 25997047
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040099
Fits the following GMC Models:
- Safari | 2005 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
- Sierra 1500 | 1999-2007 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2010 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Yukon | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Mount Bracket, Rear Part Number: 18043519
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Brake Caliper Bracket; Caliper Mount; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2001-2005 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Yukon | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Yukon XL 1500 | 2000-2006 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Caliper Mount Part Number: 18048917
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 18048082
Fits the following GMC Models:
- Sierra 1500 | 2006-2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2006 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2006-2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Sierra 3500 HD | 2007 | SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Caliper Mount Part Number: 88965691
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following GMC Models:
- Envoy | 2006-2008 | SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
GMC Caliper Mount Part Number: 88964427
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
Fits the following GMC Models:
- Envoy XL | 2002-2005 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Caliper Support, Front Passenger Side Part Number: 25832171
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
Fits the following GMC Models:
- Canyon | 2009-2012 | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

GMC Brake Caliper Bracket

Choose OEM Brake Caliper Bracket, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with GMC's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM GMC Brake Caliper Bracket. You can shop at highly competitive prices and protect your budget. All our genuine GMC parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

GMC Brake Caliper Bracket Parts and Q&A

Caliper Bracket, Driver Side
25997053
Q: How to replace the front brake caliper bracket on GMC Sierra 1500?
A:
Before replacing the front Brake Caliper Bracket you must support the brake caliper with heavy mechanic's wire or equivalent tool that allows the hydraulic flexible brake hose to stay connected to prevent damage. When replacing the front Brake Caliper Bracket keep the hydraulic brake flexible hose connected while taking out the brake pads and anti-rattle clips from the mounting bracket. Begin by removing two Brake Caliper Bracket mounting bolts followed by the caliper bracket itself while cleaning inside ends and mounting surface of all contaminants. During Brake Caliper Bracket installation position the bracket back in place while removing all traces of original adhesive patch and cleaning bolt threads with denatured alcohol before applying threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the threads. For the 15 series use 121 ft. Lbs. Torque after tightening caliper bracket bolts while the 25 and 35 series require 221 ft. Lbs. Torque on these bolts. Smoothly slide the pads against the rotor until they make contact before placing the brake pads and anti-rattle clips back in place. You will finish the brake caliper installation by installing the tire-wheels-assemblies and dropping the vehicle to the ground before applying the brake pedal to a 2/3 distance and returning it to zero position. Wait 15 seconds and perform the procedure again until the brake pedal achieves full firmness which confirms proper Brake Caliper Piston and pad settlement.
Caliper Support
15265833
Q: How to Properly Install a Brake Caliper Bracket on a GMC Yukon?
A:
From a raised and supported 1500 series vehicle position disconnect the tire and wheel assembly. Secure the brake caliper with heavy mechanic wire during brake brake hose connection to avoid brake fluid leaks and hose damage at its point of separation. Take out the caliper while supporting it according to the established method but do not detach the brake hose before starting this process. Mark the Brake Pad placement for new installation. Remove brake pads and springs before taking off both bracket mounting bolts and the entire bracket assembly. When adding the Brake Caliper Bracket always eliminate all traces of the old adhesive patch and apply threadlocker gm p/n 12345493 (Canada 10953488) to the threads before screwing on the bolts. Attache the Brake Caliper Bracket bolts and fasten them to 200 n.m (148 pounds feet) torque. Reposition the Brake Pad springs and brake pads exactly as you found them earlier. Put the brake caliper onto its bracket and mount back the tire and wheel unit. Replace brake fluid in the master cylinder tank when needed with fresh product until the reservoir reaches its specified mark.