How to replace the drive belt for the cooling fan on Chevrolet Tracker?

The starting point for Drive Belt replacement of the cooling fan requires disconnecting the negative Battery Cable. First adjust the arriving bolt along with the pivot bolt so you can relieve tension from the fan belt through tension bolt rotation in a contrary direction. You need to remove the four fan nuts while using another wrench to stabilize the fan shaft with great attention to avoid the Radiator. Severely the cooling fan connection from its attachment point on the pulley hub then extract the fan belt. When installing a new fan belt position the fan at a distance from the pulley hub before fitting then fasten the fan to the hub by applying 4 fan nuts while using a wrench for fan shaft support until tightening the nuts reaches 11 nm (97 inch lbs.). Place the fan belt properly on the pulleys followed by a clockwise rotation of the tension bolt to reach a specific belt deflection range of 4 - 5 mm (0.16 - 0.20 inch) for new belts or 5 - 7 mm (0.20 - 0.27 inch) for used belts under 10 kg (22 lbs.) of tension force. The adjusting and pivot bolts should be tightened to 45 nm torque setting maintaining the proper fan belt tension throughout the procedure. Reinstall the negative Battery Cable then tighten the Battery Cable bolt to 15 nm (11 ft. Lbs.).

How to service the front drive belt on Chevrolet Tracker?

The service procedure for replacing the Alternator belt starts with uninstalling the Power Steering Pump and a/c compressor Drive Belt. First loosen the generator bolts to pivot the generator engine-side in order to remove the accessory Drive Belt. The generator Drive Belt must be routed properly between pulleys then installed before adjustment for tension until it reaches 6 - 8 mm (0.24 - 0.32 inch) for used belts or 5 - 6 mm (0.20 - 0.24 inch) for new belts. Follow up by tightening the generator mounting bolts to 23 nm (17 ft. Lbs.) before putting back the power steering and a/c compressor Drive Belt.

OEM Chevrolet Tracker Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Drive Belts found

View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30016435
$26.14 MSRP: $59.84
You Save: $33.70 (57%)
ADD TO CART
Product Specifications
- Other Name: AC Belt; Power Steering Belt; A/C Belt
- Replaces: 30019502, 30020417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30005514
$13.55 MSRP: $31.02
You Save: $17.47 (57%)
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Fan Belt; Power Steering Belt; Water Pump Belt
- Replaces: 30002603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30027112
$10.42 MSRP: $70.70
You Save: $60.28 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Fan Belt; Belt, Drive
- Replaces: 30020683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30026873
$6.75 MSRP: $6.76
You Save: $0.01 (1%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt.; Fan Belt; Power Steering Belt; Belt, Drive
- Replaces: 30021607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30000283
$5.68 MSRP: $62.86
You Save: $57.18 (91%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker A/C Belt Part Number: 30016434
Product Specifications
- Other Name: Belt, A/C Compressor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Tracker | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 91174492
Product Specifications
- Other Name: Belt, Fan; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt; Belt, Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 Chevrolet Tracker | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30026874
Product Specifications
- Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Tracker | Base, LT, ZR2 | 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30026857
Product Specifications
- Other Name: Belt, Power Steering (On Esn); Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Tracker | Base, LT, ZR2 | 6 Cyl 2.5 L GAS
View related parts
Chevrolet Tracker Serpentine Belt Part Number: 30026799
Product Specifications
- Other Name: Belt, Water Pump; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Tracker | Base, LT, ZR2 | 6 Cyl 2.5 L GAS

Chevrolet Tracker Drive Belt

Want to cut long-term maintenance and repair costs? Choose OEM Drive Belt. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tracker parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tracker Drive Belt includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Drive Belt in Chevrolet Tracker cars is a critical feature to which the engine's strength is transferred to other devices, including the alternator or A/C compressor, among others. Normally, serpentine belt is employed to link these parts to the crankshaft pulley so that there may be efficient transmission which enables power and motion. The average Drive Belt lasts about 100,000 miles, thus, it is recommended to change a worn or damaged Drive Belt to avoid concerns on the parts as well as the engine. Different kinds of Drive Belts include V-belts as well as timing belts among others and they do vary in terms of how they perform for tractions, unnecessary wear and tear, as well as precision, all of which are relevant to automotive manufacturing. All in all, it can be understood that the Drive Belts is widely used in transmission, and it enjoys high efficiency, flexibility and cost-competitiveness besides convenient maintenance.

Chevrolet Tracker Drive Belt Parts and Q&A

Serpentine Belt
30026873
Q: How to replace the drive belt for the cooling fan on Chevrolet Tracker?
A:
The starting point for Drive Belt replacement of the cooling fan requires disconnecting the negative Battery Cable. First adjust the arriving bolt along with the pivot bolt so you can relieve tension from the fan belt through tension bolt rotation in a contrary direction. You need to remove the four fan nuts while using another wrench to stabilize the fan shaft with great attention to avoid the Radiator. Severely the cooling fan connection from its attachment point on the pulley hub then extract the fan belt. When installing a new fan belt position the fan at a distance from the pulley hub before fitting then fasten the fan to the hub by applying 4 fan nuts while using a wrench for fan shaft support until tightening the nuts reaches 11 nm (97 inch lbs.). Place the fan belt properly on the pulleys followed by a clockwise rotation of the tension bolt to reach a specific belt deflection range of 4 - 5 mm (0.16 - 0.20 inch) for new belts or 5 - 7 mm (0.20 - 0.27 inch) for used belts under 10 kg (22 lbs.) of tension force. The adjusting and pivot bolts should be tightened to 45 nm torque setting maintaining the proper fan belt tension throughout the procedure. Reinstall the negative Battery Cable then tighten the Battery Cable bolt to 15 nm (11 ft. Lbs.).
Serpentine Belt
30026874
Q: How to service the front drive belt on Chevrolet Tracker?
A:
The service procedure for replacing the Alternator belt starts with uninstalling the Power Steering Pump and a/c compressor Drive Belt. First loosen the generator bolts to pivot the generator engine-side in order to remove the accessory Drive Belt. The generator Drive Belt must be routed properly between pulleys then installed before adjustment for tension until it reaches 6 - 8 mm (0.24 - 0.32 inch) for used belts or 5 - 6 mm (0.20 - 0.24 inch) for new belts. Follow up by tightening the generator mounting bolts to 23 nm (17 ft. Lbs.) before putting back the power steering and a/c compressor Drive Belt.

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Drive Belt by Years

2004 2003 2002 2001 2000 1999 1998

OEM Chevrolet Tracker Drive Belt

10 Drive Belts found

Chevrolet Tracker Serpentine Belt Part Number: 30016435

Chevrolet Tracker Serpentine Belt Part Number: 30005514

Chevrolet Tracker Serpentine Belt Part Number: 30027112

Chevrolet Tracker Serpentine Belt Part Number: 30026873

Chevrolet Tracker Serpentine Belt Part Number: 30000283

Chevrolet Tracker A/C Belt Part Number: 30016434

Chevrolet Tracker Serpentine Belt Part Number: 91174492

Chevrolet Tracker Serpentine Belt Part Number: 30026874

Chevrolet Tracker Serpentine Belt Part Number: 30026857

Chevrolet Tracker Serpentine Belt Part Number: 30026799

Chevrolet Tracker Drive Belt

Chevrolet Tracker Drive Belt Parts and Q&A

Related Chevrolet Tracker Parts

Browse Chevrolet Tracker Drive Belt by Years