OEM Chevrolet Tracker Fan Clutch

Chevrolet Tracker Fan Clutch Parts and Q&A

• Fan Clutch
  91173035
  Q: How to service the fan clutch on Chevrolet Tracker?

  A:

  Service of the Fan Clutch starts with disconnecting the negative Battery Cable. Load the vehicle without a fan/clutch assembly while you disconnect the mounting bolts from both fan and clutch . Then separate fan from clutch . The fan requires assessment for cracks and damaged blades during this step. If breaks exist you must replace the fan. The service includes inspecting the Fan Clutch for cracks as well as testing for binding and worn bearing symptoms to decide when replacement is necessary. Install the fan by connecting it to the clutch then use the 4 bolts to fasten them while torquing to 11 nm (97 inch lbs.). Reinstall the fan/clutch assembly to the vehicle after reconnecting the negative Battery Cable but ensure the Battery Cable bolt receives a torques of 15 nm (11 ft. Lbs.).
• Fan Clutch
  91177535
  Q: How to replace the fan clutch on Chevrolet Tracker?

  A:

  The replacement of a Fan Clutch begins by disconnecting the negative terminal of the car battery. Take the fan/clutch assembly off the vehicle before removing the 4 mounting bolts which will separate the fan unit from the clutch piece. A thorough examination of the fan for cracks and damaged blades requires a replacement if evident. Check the Fan Clutch for broken parts and binding motions and deteriorating bearings that need replacement. Fans must be connected to clutches through 4 bolts which should be tightened to 11 nm (97 inch lbs.). Follow the steps of installing the fan/clutch assembly back into the vehicle while reconnecting the negative Battery Cable with correct Battery Cable bolt torque at 15 nm (11 ft. Lbs.).