How to replace the front wheel drive shaft inner CV joint and seal on Chevrolet Tahoe?

Doctors will need snap ring pliers (J 8059) alongside seal clamp tool (J 35910) and split plate swage clamp (J 36652) to replace the wheel drive shaft inner joint and seal. Three necessary tools are snap ring pliers (J 8059), seal clamp tool (J 35910), and split plate swage clamp (J 36652). Start by examining the transmission for corrosion on the sealing surface then clean it with a 320-grit cloth while using transmission fluid to clear away debris. Apply the hand grinder to carefully cut through the swage ring before removing the tripot housing from the halfshaft and giving the halfshaft a complete cleaning from all debris. Touch both the tripot balls and needle rollers or their assembly with great attention to prevent their separation. Use side cutters to cut off the small seal clamp after you squeeze the tripot seal onto the halfshaft while opening up the spider spacer ring by operating snap ring pliers (J 8059). Remove all components - spacer ring , spider assembly , tripot seal - from the halfshaft bar . Then clean the bar with a wire brush for inspection of needle rollers and trunnion for damage. Position the new small seal clamp onto the joint seal then tighten with seal clamp tool (J 35910) to achieve 136 nm (100 ft. Lbs.) torque before measuring the gap dimension. Use the convolute retainer tool on the inboard joint seal while making sure it selects the correct number of convolutions based on the vehicle model. Put together the tripot spider assembly and spacer ring on the halfshaft bar and apply grease to the tripot seal before reassembling the tripot housing segments and their corresponding seals. The assembly requires the split plate swage clamp (J 36652) to lock everything together with proper positioning between tripot seal , housing , and swage ring . Secure the assembly while evenly tightening the bolts until they are snug. Afterward loosen the bolts then extract the halfshaft assembly from split plate swage clamp (J 36652) before removing the convolute retainer tool from the seal.

OEM Chevrolet Tahoe CV Joint

CV Joint Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 CV Joints found

View related parts
Chevrolet Tahoe C.V. Joint, Front Part Number: 26037364
$272.97 MSRP: $494.06
You Save: $221.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26020728
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Inner CV Joint Part Number: 26037152
$120.01 MSRP: $225.39
You Save: $105.38 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CV Joints; CV Joint; Spider Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Outer CV Joint Part Number: 87842369
$94.90 MSRP: $156.34
You Save: $61.44 (40%)
ADD TO CART
Product Specifications
- Other Name: Joint Kit-Front Wheel Drive Shaft CV; Joint Kit, Front Axle U Joint
- Replaces: 84392098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Tahoe | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Inner CV Joint, Front Part Number: 84814583
$76.12 MSRP: $125.40
You Save: $49.28 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Spider Assembly; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056763, 22928968, 15295245, 26062616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2020 Chevrolet Tahoe | Base, Hybrid, Limited, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe C.V. Joint, Front Part Number: 22928970
$135.51 MSRP: $215.15
You Save: $79.64 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint Kit; CV Joint; Outer CV Joint; Outer Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26057639, 26069245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2020 Chevrolet Tahoe | Base, Hybrid, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe C.V. Joint, Outer Part Number: 26037371
$325.46 MSRP: $589.06
You Save: $263.60 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outer CV Joint; Outer Joint; Joint Kit, Front Axle U Joint; CV Joint
- Position: Outer
- Replaces: 26037366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe C.V. Joint, Front Part Number: 26062620
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Shaft CV; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Inner CV Joint, Front Part Number: 26062617
Product Specifications
- Other Name: Spider Kit, Front Wheel Drive Axle; CV Joint; Spider Assembly
- Position: Front
- Replaced by: 15295246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005, 1998-1999 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe C.V. Joint, Front Part Number: 26058362
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Inner CV Joint; Outer CV Joint
- Position: Front
- Replaces: 26069243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe C.V. Joint, Front Part Number: 26037361
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26025715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Inner CV Joint, Front Part Number: 15295246
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Outer CV Joint; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056765, 26062617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Tahoe
- 1998-1999 Chevrolet Tahoe

Chevrolet Tahoe CV Joint

Want to cut long-term maintenance and repair costs? Choose OEM CV Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tahoe parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tahoe CV Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Widely used in the Chevrolet Tahoe series the Chevrolet Tahoe CV Joint is a prime example of the perfect amalgamation of sturdiness and performance. Their primary function is to transmit the torque from the transmission to the drive wheels and keep the rotational speed constant that is of extreme importance for the efficient functioning, especially when it comes to the front-wheel drive layout. Some of the applied Tahoe models are fitted with different types of CV Joints; while some employ Rzeppa as well as Birfield joints for offering higher articulation and sturdiness. These joints are protected with rubber boots filled with grease and hence experience low friction and wear. Nevertheless, the boots themselves require proper care as any damage will result in contamination with the grease and subsequent rapid wear out of the CV Joint. Chevrolet Tahoe, which debuted as a full-size SUV in 1994, has gone through five generations and providing a potent V8 powertrain throughout and a class-exclusive 3.0L Duramax I6 turbo diesel engine currently. It was discovered that the CV Joint has a major contribution in the improvement of the performance and stability of the Chevrolet Tahoe on any kind of road. It is engineered and designed to be strong and from this perspective, Chevrolet Tahoe CV Joint is appreciated in the automotive market because its performance contributes to the general regard of the car as a vehicle that is versatile and dependable. Therefore, the Chevrolet Tahoe continues to attract family and professional buyers, thus exposing the significance of the CV Joint as the key player in a great driving experience.

Chevrolet Tahoe CV Joint Parts and Q&A

Inner CV Joint, Front
84814583
Q: How to replace the front wheel drive shaft inner CV joint and seal on Chevrolet Tahoe?
A:
Doctors will need snap ring pliers (J 8059) alongside seal clamp tool (J 35910) and split plate swage clamp (J 36652) to replace the wheel drive shaft inner joint and seal. Three necessary tools are snap ring pliers (J 8059), seal clamp tool (J 35910), and split plate swage clamp (J 36652). Start by examining the transmission for corrosion on the sealing surface then clean it with a 320-grit cloth while using transmission fluid to clear away debris. Apply the hand grinder to carefully cut through the swage ring before removing the tripot housing from the halfshaft and giving the halfshaft a complete cleaning from all debris. Touch both the tripot balls and needle rollers or their assembly with great attention to prevent their separation. Use side cutters to cut off the small seal clamp after you squeeze the tripot seal onto the halfshaft while opening up the spider spacer ring by operating snap ring pliers (J 8059). Remove all components - spacer ring , spider assembly , tripot seal - from the halfshaft bar . Then clean the bar with a wire brush for inspection of needle rollers and trunnion for damage. Position the new small seal clamp onto the joint seal then tighten with seal clamp tool (J 35910) to achieve 136 nm (100 ft. Lbs.) torque before measuring the gap dimension. Use the convolute retainer tool on the inboard joint seal while making sure it selects the correct number of convolutions based on the vehicle model. Put together the tripot spider assembly and spacer ring on the halfshaft bar and apply grease to the tripot seal before reassembling the tripot housing segments and their corresponding seals. The assembly requires the split plate swage clamp (J 36652) to lock everything together with proper positioning between tripot seal , housing , and swage ring . Secure the assembly while evenly tightening the bolts until they are snug. Afterward loosen the bolts then extract the halfshaft assembly from split plate swage clamp (J 36652) before removing the convolute retainer tool from the seal.