Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15295246
Inner CV Joint, Front

1995-2019 GM

Customer Questions & Expert Answers (19)
GM 15295246 Inner CV Joint, Front
  • Part Description
    Joint, Front Axle U Joint; CV Joint
  • Position
    Front
  • Replaces
    26056765, 26062617
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1998 GMC Yukon Inner CV Joint, Front Diagram for 15295246
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15295246

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15295246 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15295246 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you remove the boot from the halfshaft bar for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Slide the boot down the halfshaft bar and away from the CV joint outer race, wiping away any grease.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done to the halfshaft bar before assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Clean the halfshaft bar with a wire brush to remove rust and inspect the needle rollers, needle bearings, and trunnion for damage, replacing any damaged parts with the appropriate service kit.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done to the components after disassembly for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Clean the inner and outer race assemblies, CV joint cage, and chrome alloy balls thoroughly with cleaning solvent, ensuring all old grease and contaminants are removed, then dry all parts and check for wear or damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done to the halfshaft bar before reassembly for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Clean the halfshaft bar with a wire brush to eliminate rust in the seal mounting area and inspect the needle rollers, needle bearings, and trunnion for wear or damage, replacing any faulty parts with the appropriate service kit.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the tightening process for the bolts for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Alternate tightening each bolt until both halves of the tool touch, then loosen the bolts to remove the halfshaft assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you secure the small boot clamp for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Secure the small boot clamp using J35910, tightening it to 136 Nm and checking the gap dimension on the clamp ear.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the first step in the process for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Begin by removing the wheel drive shaft and the wheel drive shaft seal cover if applicable.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the tightening procedure for the bolts for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten each bolt 180 degrees at a time, alternating until both halves of the tool are in contact, then loosen the bolts and remove the halfshaft assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the first step in cutting the swage ring for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Carefully use a hand grinder to cut through the swage ring.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you secure the small boot clamp for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Secure the small boot clamp with J35910, a breaker bar, and a torque wrench to 136 Nm (100 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove the small boot clamp for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Use side cutters to remove the small boot clamp and slide the boot down the halfshaft bar away from the CV joint outer race.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove the CV joint and boot from the halfshaft bar for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Spread the snap ring ears apart with J 8059 and pull the CV joint and boot from the halfshaft bar, discarding the old boot.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the first step in the process for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Inspect the transmission sealing surface for corrosion and clean it with 320 grit cloth if necessary, using transmission fluid to remove debris.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the next step after securing the small seal clamp for the 2004 GMC Yukon? Posted by Customer
    A:
    Install the convolute retainer tool over the inboard joint seal, ensuring to capture the correct number of convolutions based on the model.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you clamp the CV joint seal to the outer race for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Use the Split Plate Swage Clamp, aligning the components and tightening the bolts until both halves of the tool touch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you install the chrome alloy balls back into the CV joint for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Use a brass drift to tilt the cage and install the chrome alloy balls one by one.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you assemble the tripot joint for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Assemble the tripot joint with the convolute retainer in the correct position, ensuring to capture the necessary convolutions for the respective models.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove components from the halfshaft bar for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the small boot retaining clamp with side cutters and take out the spacer ring, tripot spider assembly, and tripot boot from the halfshaft bar.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner CV Joint, Front 15295246 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15295246 Inner CV Joint, Front is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15295246 Inner CV Joint, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 15295246 maintains top performance when functioning as the Joint, Front Axle U Joint; CV Joint unit at its Front. The component 15295246 is constructed from durable material and its dimensions span 7.5 x 7.4 x 4.9 inches while weighing 4.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Outer CV Joint; Inner Joint; Tripot Housing; Housing. The part 15295246 has available replacement options 26056765, 26062617. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.