Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26058362
C.V. Joint, Front

1999-2013 GM

Customer Questions & Expert Answers (18)
GM 26058362 C.V. Joint, Front
  • Part Description
    Joint, Front Axle U Joint; CV Joint
  • Position
    Front
  • Replaces
    26069243
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2001 Chevy Silverado 1500 HD C.V. Joint, Front Diagram for 26058362
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26058362

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26058362 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 26058362 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What tools are required for servicing and repairing the Constant Velocity Joint Boot for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Snap Ring Pliers (J8059), Seal Clamp Tool (J35910), and Drive Axle Clamp Swage Tool (J36652).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove components from the halfshaft bar for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the small boot retaining clamp with side cutters and take out the spacer ring, tripot spider assembly, and tripot boot from the halfshaft bar.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you secure the large diameter of the CV joint boot for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Slide the large diameter of the CV joint boot over the CV joint outer race and clamp it tightly using the Drive Axle Clamp Swage Tool (J 36652), ensuring proper alignment and tightening the bolts until both halves of the tool touch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the final step in the process for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Inspect the inboard stroke position using the specified measurements for each model and remove the convolute retainer tool from the boot.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove the components from the halfshaft bar for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the small boot retaining clamp with side cutters and take out the spacer ring, tripot spider assembly, and tripot boot.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done after all six chrome alloy balls are removed for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Pivot the cage and inner race 90 degrees to align with the outer race and lift them out.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What tools are required to replace the wheel drive shaft inner joint and seal for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    J 35910 Seal Clamp Tool (J 35910), J 36652 Drive Axle Clamp Swage Tool (J 36652), and J 36652-98 Axle Swage Tool (J 36652-98).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done after cleaning all grease from the CV joint face for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Locate the halfshaft bar retaining snap ring in the inner race.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you ensure proper alignment before tightening for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure the tripot boot, housing, and swage ring are aligned, then tighten the bolts alternately until both sides of the tool touch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you secure the new boot clamp for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Pack the CV joint boot and assembly with the supplied grease, then secure the new small boot clamp using the Drive Axle Seal Clamp Pliers, tightening it to 136 Nm (100 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done with the CV joint face for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Wipe grease from the CV joint face.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove the small boot clamp for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Use side cutters to remove the small boot clamp and slide the boot down the halfshaft bar away from the CV joint outer race.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How should the halfshaft bar be prepared for installation for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Clean the halfshaft bar with a wire brush to remove rust in the seal mounting area.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What should be done after removing the tripot housing for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the small boot retaining clamp with side cutters and take out the spacer ring, tripot spider assembly, and tripot boot from the halfshaft bar.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    What is the procedure for positioning the halfshaft assembly for the 2004 GMC Yukon? Posted by Customer
    A:
    Position the inboard end of the halfshaft assembly into the appropriate base, install the top half of the tool, align the swage ring and clamp, and hand tighten the bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you prepare the new CV joint assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Apply a light coat of grease to the inner and outer race grooves, align the inner race with the cage, and insert it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    Q:
    How do you remove the halfshaft bar retaining snap ring for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Locate and spread the halfshaft bar retaining snap ring using the Snap Ring Pliers.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM C.V. Joint, Front 26058362 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26058362 C.V. Joint, Front is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26058362 C.V. Joint, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by Manufacturer Part Number 26058362 maintains top performance when functioning as the Joint, Front Axle U Joint; CV Joint unit at its Front. The component 26058362 is constructed from durable material and its dimensions span 8.7 x 6.9 x 7.1 inches while weighing 12.40 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner CV Joint; Outer CV Joint. The part 26058362 has available replacement options 26069243. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.