How to replace the Starter Solenoid on Chevrolet Silverado 3500 Classic?

In order to replace the Starter motor solenoid, take out the Starter motor and relocate the m-terminal stud weather cover. The 5-last step is to try to clean the epoxy coating from the m-terminal stud, loosening the m-terminal stud nut and removing the cable from m-terminal stud. Then take out the solenoid bolts and separate solenoids from the housing, disconnecting solenoid plunger from the drive gear lever. Please observe the way in which the spring is located against the drive gear lever and also observe the way in which the drive gear lever is located inside the solenoid plunger loop. Remove the solenoid housing and the solenoid plunger and spring if necessary. For installment, if there is a need for it, install the solenoid plunger and spring, and then apply three bond silicone 1207b, gm p/n 97720043, around the attachment of the starters solenoid area. It will ensure the drive gear lever is well fitted into the solenoid plunger loop so as to prevent abnormal operation of the Starter. Install the solenoid, accompanied by driving of the drive gear lever that fits into the solenoid plunger loop placing the handle lever by pull the lever out and the plunger out from the Starter housing there by tipping the solenoid and push it against the housing. Mount the solenoid bolts and tighten them further to 10 n.m (89 lb in). Clean out any extra silicone near the base of the solenoid for a waterproof seal. Hook up the cable to the m-terminal stud between the washers and terminal nut, tightening the m-terminal stud nut to 8 n.m (71 lb in. Cap the m-terminal stud connection by use of three bond silicone 1207b or gm p/n 97720043, and reset the m-terminal stud weather cover on the studs. Test the Starter bench on a free-run condition, then install the Starter motor.

OEM Chevrolet Starter Solenoid

Starter Solenoid Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Starter Solenoids found

View related parts
Chevrolet Solenoid Part Number: 93742953
$35.36 MSRP: $191.66
You Save: $156.30 (82%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Starter Solenoid
Fits the following Chevrolet Models:
- Aveo | 2005-2008 | LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Solenoid Part Number: 10515497
$9.87 MSRP: $136.32
You Save: $126.45 (93%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Chevrolet Models:
- Aveo | 2009-2010 | LS, LT | 4 Cyl 1.6 L GAS
- Aveo5 | 2009-2011 | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 92204535
$54.02 MSRP: $101.43
You Save: $47.41 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Starter Motor; Solenoid
Fits the following Chevrolet Models:
- Caprice | 2011-2013 | PPV | 6 Cyl 3.6 L FLEX, 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Solenoid Part Number: 1114458
Product Specifications
- Other Name: Starter So; Contact, Starter Motor Solenoid; Switch, Electrical Switches; Switch, Starter Motor
Fits the following Chevrolet Models:
- Blazer | 1987-1990 | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C10 | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C10 Suburban | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C1500 | 1988-1990 | Cheyenne, Scottsdale, Silverado, WT | 8 Cyl 6.2 L DIESEL
- C20 | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C20 Suburban | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C2500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C30 | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- C3500 | 1988-1990 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- Caprice | 1984 | Classic | 8 Cyl 5.7 L DIESEL
View More
View related parts
Chevrolet Solenoid Part Number: 91176563
Fits the following Chevrolet Models:
- Tracker | 2001-2004 | Base, LT, ZR2 | 6 Cyl 2.5 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 96067821
Product Specifications
- Other Name: Switch, Starter Solenoid; Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Metro | 1998-2000 | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 96058474
Product Specifications
- Other Name: Switch, Starter Motor; Solenoid
Fits the following Chevrolet Models:
- Metro | 1998-2001 | Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
- Tracker | 1998 | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 94858123
Product Specifications
- Other Name: Switch, Starter Solenoid; Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Prizm | 1998-2002 | Base, LSi | 4 Cyl 1.8 L GAS
View related parts
Chevrolet Solenoid Part Number: 91174644
Product Specifications
- Other Name: Switch, Starter Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Tracker | 1999-2003 | Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 1114591
Product Specifications
- Other Name: Switch, Starter Solenoid; Solenoid; Switch Assembly, Starter Motor; Switch, Starter Motor
- Replaces: 1114578
Fits the following Chevrolet Models:
- Beretta | 1992-1995 | Base, GT, GTZ, Z26 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Blazer | 1995-1996 | Base, LS, LT | 6 Cyl 4.3 L GAS
- C1500 | 1988-1996 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 6.2 L DIESEL
- C2500 | 1988-1996 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 6.2 L DIESEL
- C3500 | 1988-1991 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
- Camaro | 1991-1995 | Base, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 8 Cyl 5.0 L GAS
- Caprice | 1991-1995 | Base, Classic, Classic LS, Classic LTZ | 6 Cyl 4.3 L GAS, 8 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
- Cavalier | 1992-1995 | Base, LS, RS, VL, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Corsica | 1992-1995 | Base, LT, LTZ | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Express 2500 | 1996 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Starter Solenoid Part Number: 1114531
Product Specifications
- Other Name: Switch, Starter Solenoid; Drive; Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Astro | 1985-1996 | Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
- Beretta | 1996, 1992-1994, 1988-1990 | Base, GT, GTZ, Indianapolis 500 Pace Car, Z26 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
- Blazer | 1987-1994 | Base, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C10 | 1984-1986 | Custom, Scottsdale, Silverado | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C10 Suburban | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C1500 | 1988-1999 | 454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C1500 Suburban | 1996-1999, 1992-1994 | Base, LS, LT, Silverado | 8 Cyl 5.7 L GAS
- C20 | 1984-1986 | Custom, Scottsdale, Silverado | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C20 Suburban | 1984-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- C2500 | 1988-2000 | Base, Cheyenne, LS, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View More
View related parts
Chevrolet Starter Solenoid Part Number: 1114524
Product Specifications
- Other Name: Switch, Starter Solenoid; Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Blazer | 1991-1994 | Base, Cheyenne, Scottsdale, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS
- C1500 | 1988-1991 | 454 SS, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 7.4 L GAS
- C2500 | 1988-1991 | Cheyenne, Scottsdale, Silverado | 6 Cyl 4.3 L GAS, 8 Cyl 7.4 L GAS
- C3500 | 1988-1991 | Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
- K1500 | 1988-1994 | Base, Cheyenne, Scottsdale, Silverado, Sport, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- K1500 Suburban | 1992-1994 | Base, Silverado | 8 Cyl 5.7 L GAS
- K2500 | 1988-1994 | Base, Cheyenne, Scottsdale, Silverado, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1994 | Base, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- K3500 | 1988-1994 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
- V1500 Suburban | 1991 | Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Solenoid Part Number: 10520191
Product Specifications
- Other Name: Switch, Starter Motor
- Replaces: 93740762, 93740763
Fits the following Chevrolet Models:
- Aveo | 2007-2008, 2004 | Base, LS, LT | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2008 | LS, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Starter Solenoid Part Number: 10456454
Product Specifications
- Other Name: Solenoid, Starter Motor; Solenoid; Switch, Starter Motor
Fits the following Chevrolet Models:
- Blazer | 1994 | Base, Silverado, Silverado Sport | 8 Cyl 6.5 L DIESEL
- C1500 | 1991-1998 | Base, Cheyenne, Scottsdale, Silverado, WT | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1994-1999 | Base, LS, LT, Silverado | 8 Cyl 6.5 L DIESEL
- C2500 | 1991-2000 | Base, Cheyenne, LS, Scottsdale, Silverado, WT | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1994-1999 | Base, LS, LT, Silverado | 8 Cyl 6.5 L DIESEL
- C3500 | 1991-2000 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- Express 2500 | 1996-2002 | Base, LS | 8 Cyl 6.5 L DIESEL
- Express 3500 | 1996-2002 | Base, LS | 8 Cyl 6.5 L DIESEL
- G20 | 1992-1995 | Beauville, Chevy Van, Sportvan | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- G30 | 1992-1996 | Beauville, Chevy Van, Hi-Cube, Sportvan | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View More
View related parts
Chevrolet Solenoid Part Number: 97779441
$121.93 MSRP: $191.84
You Save: $69.91 (37%)
Product Specifications
- Other Name: Switch, Starter Motor
- Replaces: 97383133, 97729075
Fits the following Chevrolet Models:
- Express 2500 | 2008-2010 | Base | 8 Cyl 6.6 L DIESEL
- Express 3500 | 2008-2010 | Base | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD | 2001-2007 | Base, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View More

Chevrolet Starter Solenoid

Choose OEM Starter Solenoid, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet Starter Solenoid. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet Starter Solenoid snaps forward power on to ensure that there is no hesitation in the wake up of the engine. Drivers embrace Chevy that has a knack of mixing comfort in everyday routines with gutsy confidence on the road and fearless style. Chevrolet never stops at basic controls, powerful drives, and prices that reflect actual budgets. Its product range includes city hatches to work trucks with all of them being designed to handle hard miles. Family travels become less weighty as Chevy cabins remain quiet and tech friendly, as opposed to flashy. Customers see through the curtain and Chevy rewards them with durable components and definite upgrades. The regular running of errands, the backroad ventures, or the cross country delivery all lie within the same wide guarantee of dependability. Be less concerned, drive more, that is the thing. When you flick the key, the Starter Solenoid closes circuit to the starter motor in a flash, hurling high current through heavy contacts and at the same time sending the pinion into the ring gear so that it snaps into place. The reliance on older inertia drives was based on the momentum, whereas the present one-way clutch located within the Starter Solenoid does not allow the motor to over-spin once the engine is started. The majority of failures are found to be in the form of weak batteries or corroded cables and not the unit itself, which is why healthy voltage helps in keeping starts sharp.

Chevrolet Starter Solenoid Parts and Q&A

Solenoid
97779441
Q: How to replace the Starter Solenoid on Chevrolet Silverado 3500 Classic?
A:
In order to replace the Starter motor solenoid, take out the Starter motor and relocate the m-terminal stud weather cover. The 5-last step is to try to clean the epoxy coating from the m-terminal stud, loosening the m-terminal stud nut and removing the cable from m-terminal stud. Then take out the solenoid bolts and separate solenoids from the housing, disconnecting solenoid plunger from the drive gear lever. Please observe the way in which the spring is located against the drive gear lever and also observe the way in which the drive gear lever is located inside the solenoid plunger loop. Remove the solenoid housing and the solenoid plunger and spring if necessary. For installment, if there is a need for it, install the solenoid plunger and spring, and then apply three bond silicone 1207b, gm p/n 97720043, around the attachment of the starters solenoid area. It will ensure the drive gear lever is well fitted into the solenoid plunger loop so as to prevent abnormal operation of the Starter. Install the solenoid, accompanied by driving of the drive gear lever that fits into the solenoid plunger loop placing the handle lever by pull the lever out and the plunger out from the Starter housing there by tipping the solenoid and push it against the housing. Mount the solenoid bolts and tighten them further to 10 n.m (89 lb in). Clean out any extra silicone near the base of the solenoid for a waterproof seal. Hook up the cable to the m-terminal stud between the washers and terminal nut, tightening the m-terminal stud nut to 8 n.m (71 lb in. Cap the m-terminal stud connection by use of three bond silicone 1207b or gm p/n 97720043, and reset the m-terminal stud weather cover on the studs. Test the Starter bench on a free-run condition, then install the Starter motor.