To replace the Throttle Body assembly, first remove the outlet resonator of the air cleaner. Remove the Throttle Body by first disconnecting the engine wiring harness electrical connector from the Throttle Body and then remove the Throttle Body bolts, and pull off the Throttle Body with the old gasket. Then, install a new Throttle Body gasket to the upper
Intake Manifold and slide the Throttle Body over the manifold. Mount the Throttle Body bolts using 10 nm (89 lb in). Reconnect the engine wiring harness electrical connector back to the Throttle Body and finally install the air cleaner outlet resonator.