How to Replace a MAP Sensor on Chevrolet Malibu?

Start the replacement of the manifold absolute pressure sensor by removing the air cleaner outlet duct before disconnecting the evaporative emission (EVAP) canister purge tube from the Intake Manifold for repositioning out of the way. The worker must first unplug the MAP Sensor electrical connector from the Fuel Injector wiring harness then remove the wiring harness retention clips from fuel rail tabs before disconnecting the harness electrical connector from number 3 Fuel Injector. Press the tabs while sliding the MAP Sensor so you can remove it from its position. Clean engine oil should be used to lubricate the new MAP Sensor seal before you install the MAP Sensor inside the Intake Manifold. Reconnect the Fuel Injector wiring harness electrical connector to number 3 Fuel Injector then install the Fuel Injector wiring harness clips onto the fuel rail tabs followed by reconnecting the Fuel Injector wiring harness electrical connector to the MAP Sensor. Extract the evap canister purge tube from the pathway and then return it to the Intake Manifold before installing the air cleaner outlet duct.

How to service the MAP Sensor on Chevrolet Malibu?

For servicing the Manifold Absolute Pressure (MAP) Sensor, turn OFF the ignition first. Next, disconnect the vacuum line on the MAP sensor as well as the MAP sensor electrical connection. Then, remove the bolts and remove the MAP sensor. Installation begins with installing the bolts with the mastery map sensor vacuum line and then finally connect the map sensor electrical connector.

OEM Chevrolet Malibu MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 MAP Sensors found

View related parts
Chevrolet Malibu Throttle Position Sensor Part Number: 12711681
$46.60 MSRP: $94.64
You Save: $48.04 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; M.A.P. Sensor; Pressure Sensor; Boost Sensor; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12694725, 12644228, 12594942, 12701247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Chevrolet Malibu | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Map Sensor Part Number: 55493530
$11.46 MSRP: $18.88
You Save: $7.42 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Turbo Air Pressure; Pressure Sensor; Boost Sensor; Sensor; Sensor, Coolant Temperature (Engine Unit); Sensor, Computer Control Sensors
- Replaced by: 12694431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 55573248
$27.69 MSRP: $45.61
You Save: $17.92 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2015 Chevrolet Malibu | Classic LS, Classic LT, Eco, Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 12650598
$20.27 MSRP: $38.08
You Save: $17.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; Air Charge Temperature Sensor; MAP Sensor; Temperature Sensor; Pressure Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor, Green, Passenger Side Part Number: 12569240
$66.22 MSRP: $112.74
You Save: $46.52 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor; Manifold Pressure Sensor; Emission Control Sensors (Vehicle Speed, Oxygen)
- Position: Passenger Side
- Replaces: 16254719, 16137039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 55575988
$20.24 MSRP: $33.33
You Save: $13.09 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 25203477
$22.19 MSRP: $41.68
You Save: $19.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor
- Replaces: 12612110, 12643955, 25202498
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2022 Chevrolet Malibu | LS, LT, LTZ, Premier | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 19418807
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chevrolet Malibu | Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 12707766
$27.47 MSRP: $53.33
You Save: $25.86 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Intake Air Pressure & Temperature; Map Sensor; Pressure Sensor; Air Intake Temperature Sensor; Sensor, Computer Control Sensors
- Replaces: 12670600, 12681993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu M.A.P. Sensor Part Number: 19179572
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor
- Replaces: 16231423, 16232443, 16201609
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Malibu | Base | 4 Cyl 2.4 L GAS

Chevrolet Malibu MAP Sensor

Want to cut long-term maintenance and repair costs? Choose OEM MAP Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu MAP Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The MAP Sensor in Chevrolet Malibu vehicles is one of the most important elements that involves itself in determining the pressure of the air that is being introduced into the intake manifold. This small device communicates the information to the engine control unit (ECU) and allows it alters the fuel injectors in an effort to fine-tune the air volume in the future combustion cylinders accordingly. Differential types of MAP Sensor may be fitted in Chevrolet Malibu especially on naturally aspirate and forced induction engines. Thus, while naturally aspirated engines may only use a MAP Sensor, or a mass airflow (MAF) sensor at most, forced induction engines can use both for even better result. The engine needs to use the MAP Sensor so as to meter fuel properly, set the ignition timing, and enhance engine performance hence making it a strategic component of the Chevrolet Malibu's electronic controls.

Chevrolet Malibu MAP Sensor Parts and Q&A

M.A.P. Sensor
55573248
Q: How to Replace a MAP Sensor on Chevrolet Malibu?
A:
Start the replacement of the manifold absolute pressure sensor by removing the air cleaner outlet duct before disconnecting the evaporative emission (EVAP) canister purge tube from the Intake Manifold for repositioning out of the way. The worker must first unplug the MAP Sensor electrical connector from the Fuel Injector wiring harness then remove the wiring harness retention clips from fuel rail tabs before disconnecting the harness electrical connector from number 3 Fuel Injector. Press the tabs while sliding the MAP Sensor so you can remove it from its position. Clean engine oil should be used to lubricate the new MAP Sensor seal before you install the MAP Sensor inside the Intake Manifold. Reconnect the Fuel Injector wiring harness electrical connector to number 3 Fuel Injector then install the Fuel Injector wiring harness clips onto the fuel rail tabs followed by reconnecting the Fuel Injector wiring harness electrical connector to the MAP Sensor. Extract the evap canister purge tube from the pathway and then return it to the Intake Manifold before installing the air cleaner outlet duct.
M.A.P. Sensor, Green, Passenger Side
12569240
Q: How to service the MAP Sensor on Chevrolet Malibu?
A:
For servicing the Manifold Absolute Pressure (MAP) Sensor, turn OFF the ignition first. Next, disconnect the vacuum line on the MAP sensor as well as the MAP sensor electrical connection. Then, remove the bolts and remove the MAP sensor. Installation begins with installing the bolts with the mastery map sensor vacuum line and then finally connect the map sensor electrical connector.