How to perform remote programming of the Engine Control Module on Chevrolet Malibu?

A correct remote programming sequence for the Engine Control Module starts by switching OFF ignition and then connecting the Tech 2 to the data link connector (DLC). Start by activating ignition power while keeping the engine engine off along with shutting down all vehicle accessories. Service Programming should be selected within the Tech 2 interface before step-by-step vehicle identification is required. First choose the module type to be programmed and its programming type at the display while inspecting that the displayed VIN matches the actual VIN; correct the VIN at the Techline terminal if both values do not match exactly. Service Programming needs to be exited and the Tech 2 power switched off while disconnecting the device from the vehicle. The next step is to reattach the Tech 2 to the Techline terminal where you should select Service Programming followed by choosing Tech 2 as the operational tool. During the procedure check the vehicle's programming type while verifying the VIN for accuracy before determining the module type alongside the programming type selection which may be Normal for calibration updates, Vehicle Configuration Index (VCI) without VIN details or Reconfigure for tire size modifications. Select the suitable calibration file and double-check the mounting connections before initiating the download process by selecting Reprog on the Tech 2. The download process completes when you turn off the Tech 2 device while disconnecting it from Techline terminals to afterward reattach them to the DLC port. Use the ON/OFF switch on the Tech 2 system to activate it and the ignition system while the engine remains in an OFF position before starting the Service Programming process. Checking all PCM and DLC connections and updating Techline software stands as essential before reprogramming a control module following an interrupted procedure that requires keeping the ignition system on. The control module should be replaced after programming fails to complete successfully. Finally, leave the Service Programming mode after completing the download process. To complete the process disable the ignition for 30 seconds then switch off the Tech 2. Perform the CKP System Variation Learn Procedure then run Inspection/Maintenance (I/M) Complete System Set Procedure before Programming Theft Deterrent System Components and resetting the GM Oil Life System if a control module was replaced.

How to replace the Engine Control Module (LE5) (2.4L Non Hybrid) on Chevrolet Malibu?

Replacent control modules for the Engine Control Module (LE5) (2.4L Non Hybrid) should be performed with off ignition to protect system components when working on connections. Touching the control module case to battery voltage should be avoided to protect the module from damage and touching connector pins or soldered components can cause electrostatic discharge. You must eliminate all debris from control module connector surfaces together with a visual check of gaskets to make sure they are properly installed so contaminants stay out of the device. The engine oil life percentage requires recording since programming is necessary after module replacement but non-compliance will reset the oil counter to default 100 percent at 5,000 km (3,000 mi) from the previous change. Use a scan tool to get and document engine oil life percentage before disconnecting the negative Battery Cable as a first step. The procedure requires sliding up the lever locks to release the engine wiring harness electrical connectors then disconnecting the ecm connectors before using a small screwdriver to release the battery tray retaining tab before ecm extraction. The installation process starts by slotting the new ecm into the battery tray bracket while you press down until the retaining tab locks in place followed by reconnecting engine wiring harness electrical connectors and finishing with lever lock engagement by sliding them downward. The next step completes with reconnecting the negative Battery Cable followed by ecm programming when necessary.

OEM Chevrolet Malibu Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Engine Control Modules found

View related parts
Chevrolet Malibu PCM Part Number: 19210738
$243.78 MSRP: $456.42
You Save: $212.64 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Powertrain Control; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12678511
$265.60 MSRP: $538.40
You Save: $272.80 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Engine Control Module; ECM; Module, Emission Control System
- Replaces: 12636660, 12607096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2006 Chevrolet Malibu | Hybrid, LT, LTZ, Maxx SS, SS | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12653998
$389.84 MSRP: $791.80
You Save: $401.96 (51%)
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaces: 12633555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12209614
$322.30 MSRP: $583.37
You Save: $261.07 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaced by: 19433893
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 19109045
$159.97 MSRP: $284.56
You Save: $124.59 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture); Engine Control Module; ECM
- Replaces: 16268183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12678513
$333.65 MSRP: $624.14
You Save: $290.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaces: 12633264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Malibu | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 19210069
$339.79 MSRP: $618.94
You Save: $279.15 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Powertrain Control; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Malibu | LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.5 L GAS
View related parts
Chevrolet Malibu ECM Part Number: 12719250
$238.13 MSRP: $447.18
You Save: $209.05 (47%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/O Calibration); Module, Emission Control System
- Replaces: 12697426, 12680194, 12698174, 12698175, 12691559, 12711695, 12693524, 12693292, 12696017, 12703776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Malibu | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 19210070
$316.50 MSRP: $592.06
You Save: $275.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Powertrain Control; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Malibu | LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12612384
$261.01 MSRP: $488.26
You Save: $227.25 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Malibu | Classic LS, Classic LT, LS, LT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Malibu ECM Part Number: 12700116
$173.70 MSRP: $352.81
You Save: $179.11 (51%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu) E80 Service No Start.; Engine Control Module; Module, Emission Control System
- Replaces: 12669908, 12687467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chevrolet Malibu | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 12651994
$517.66 MSRP: $932.72
You Save: $415.06 (45%)
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaces: 12643248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 9378702
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture) Requires Reprogramming; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Control Module Part Number: 9361735
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture) Requires Reprogramming; Engine Control Module; PCM; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu PCM Part Number: 19210734
Product Specifications
- Other Name: Module Assembly, Powertrain Control; Engine Control Module; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet Malibu | LS, LT, Maxx, Maxx LS, Maxx LT | 6 Cyl 3.5 L GAS
View related parts
Chevrolet Malibu Control Module Part Number: 16236757
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture) Requires Reprogramming; Engine Control Module; PCM; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Control Module Part Number: 9380717
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Remanufacture) Requires Reprogramming; Engine Control Module; PCM; ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Control Module, Green Line Part Number: 24243661
Product Specifications
- Other Name: Module, Engine Electrical; Inverter Assembly; Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Malibu | Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Control Module Part Number: 23159968
Product Specifications
- Other Name: Battery Assembly; Battery; Module
- Replaced by: 24279541
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Control Module Part Number: 24279540
Product Specifications
- Other Name: Module Assembly-Generator Control & Battery (New Domestic); Battery Assembly; Module; Module, Engine Electrical; Battery
- Replaces: 23102217, 23159967, 23346806, 22948845, 23211190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Chevrolet Malibu Engine Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Engine Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Engine Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Malibu Engine Control Module is a significant part of Chevrolet Malibu models that shows the reliable and high-performance car part. Allied to the air-fuel mixture, ignition timings and the engine idle settings, the ECM regulates nearly every aspect of the power train and makes each Chevrolet Malibu car engine perform at its premier. This new highly integrated Engine Control Module works with different Malibu models and has the ability to switch between different engines varying from latest 1.35-liter E-Turbo Inline-3 and 1.6-liter LH7 turbo diesel engines. Performance is not the only area that is underlined in the operation of the ECM, as it also improves safety by adjusting the characteristics of the engine during various driving situations. That's why, such moments as the Chevrolet Malibu Engine Control Module supports, for example, variable valve timing that increase fuel efficiency and decrease emissions make this model rather unique in the framework of automotive industry. The fact that can also act as powertrain control module (PCM) that controls the engine and transmission gives it a wider application in vehicle management. In as much as the launch of the newest has been adorned to a number of years of innovation Chevrolet Malibu Engine Control Module maintains the reputation of being the primary element of Malibu's engineering that allows the drivers to have a remarkable, efficient and safe ride. Whether driving in city traffic or on the highway, the driving experience of Chevrolet Malibu that is empowered with highly developed Engine Control Module is pleasurable as well as reliable.

Chevrolet Malibu Engine Control Module Parts and Q&A

PCM
12209614
Q: How to perform remote programming of the Engine Control Module on Chevrolet Malibu?
A:
A correct remote programming sequence for the Engine Control Module starts by switching OFF ignition and then connecting the Tech 2 to the data link connector (DLC). Start by activating ignition power while keeping the engine engine off along with shutting down all vehicle accessories. Service Programming should be selected within the Tech 2 interface before step-by-step vehicle identification is required. First choose the module type to be programmed and its programming type at the display while inspecting that the displayed VIN matches the actual VIN; correct the VIN at the Techline terminal if both values do not match exactly. Service Programming needs to be exited and the Tech 2 power switched off while disconnecting the device from the vehicle. The next step is to reattach the Tech 2 to the Techline terminal where you should select Service Programming followed by choosing Tech 2 as the operational tool. During the procedure check the vehicle's programming type while verifying the VIN for accuracy before determining the module type alongside the programming type selection which may be Normal for calibration updates, Vehicle Configuration Index (VCI) without VIN details or Reconfigure for tire size modifications. Select the suitable calibration file and double-check the mounting connections before initiating the download process by selecting Reprog on the Tech 2. The download process completes when you turn off the Tech 2 device while disconnecting it from Techline terminals to afterward reattach them to the DLC port. Use the ON/OFF switch on the Tech 2 system to activate it and the ignition system while the engine remains in an OFF position before starting the Service Programming process. Checking all PCM and DLC connections and updating Techline software stands as essential before reprogramming a control module following an interrupted procedure that requires keeping the ignition system on. The control module should be replaced after programming fails to complete successfully. Finally, leave the Service Programming mode after completing the download process. To complete the process disable the ignition for 30 seconds then switch off the Tech 2. Perform the CKP System Variation Learn Procedure then run Inspection/Maintenance (I/M) Complete System Set Procedure before Programming Theft Deterrent System Components and resetting the GM Oil Life System if a control module was replaced.
PCM
12678511
Q: How to replace the Engine Control Module (LE5) (2.4L Non Hybrid) on Chevrolet Malibu?
A:
Replacent control modules for the Engine Control Module (LE5) (2.4L Non Hybrid) should be performed with off ignition to protect system components when working on connections. Touching the control module case to battery voltage should be avoided to protect the module from damage and touching connector pins or soldered components can cause electrostatic discharge. You must eliminate all debris from control module connector surfaces together with a visual check of gaskets to make sure they are properly installed so contaminants stay out of the device. The engine oil life percentage requires recording since programming is necessary after module replacement but non-compliance will reset the oil counter to default 100 percent at 5,000 km (3,000 mi) from the previous change. Use a scan tool to get and document engine oil life percentage before disconnecting the negative Battery Cable as a first step. The procedure requires sliding up the lever locks to release the engine wiring harness electrical connectors then disconnecting the ecm connectors before using a small screwdriver to release the battery tray retaining tab before ecm extraction. The installation process starts by slotting the new ecm into the battery tray bracket while you press down until the retaining tab locks in place followed by reconnecting engine wiring harness electrical connectors and finishing with lever lock engagement by sliding them downward. The next step completes with reconnecting the negative Battery Cable followed by ecm programming when necessary.