How to replace the inner CV Boot and CV Joint on Chevrolet K3500?

Start by collecting snap ring pliers (J8059) along with seal clamp tool (J35910) and split plate swage clamp for k10 models (J36652-98) and split plate swage clamp for k20/k30 models (J36652-1). You need four tools for this repair: snap ring pliers (J8059), seal clamp tool (J35910), split plate swage clamp for k10 models (J36652-98), and split plate swage clamp for k20/k30 models (J36652-1). Check the transmission sealing surface of the halfshaft for corrosion before cleaning it with 320 grit cloth if needed. A hand grinder should cut through the swage ring in order to remove the tripot housing without damaging it. After removing the housing completely degrease it thoroughly. When handling the tripot spider assembly maintain careful movements because separation of tripot balls and needle rollers will occur. After removing the boot clamp with side cutters evacuate the spider spacer ring by using snap ring pliers (J8059). Clear the halfshaft bar by cleaning it with a wire brush after removing the spacer ring , spider assembly , and tripot boot . All components must undergo examination for damage and wear before replacing them with new parts. To install the new small boot clamp on the joint boot use the seal clamp tool (J35910) at 136 nm (100 ft. Lbs.) torque. Position the convolute retainer properly across the inboard joint boot before installing the tripot spider assembly and spacer ring onto the halfshaft bar. Begin by filling the tripot housing and boot with grease supplied for packing. After reassembly ensure the swage ring achieves correct alignment. Place mount the split plate swage clamp (J36652) into a vise position and install your model-specific clamp before verifying the inboard stroke position. Apply torque to the clamp bolts while alternating each bolt until fastened, afterward remove both the boot's convolute retainer and halfshaft assembly.

OEM Chevrolet K3500 CV Joint

CV Joint Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 CV Joints found

View related parts
Chevrolet K3500 Inner CV Joint, Front Part Number: 84814583
$76.12 MSRP: $125.40
You Save: $49.28 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Spider Assembly; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056763, 22928968, 15295245, 26062616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 C.V. Joint, Outer Part Number: 26037371
$325.46 MSRP: $589.06
You Save: $263.60 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outer CV Joint; Outer Joint; Joint Kit, Front Axle U Joint; CV Joint
- Position: Outer
- Replaces: 26037366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Inner CV Joint Part Number: 26037152
$120.01 MSRP: $225.39
You Save: $105.38 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CV Joints; CV Joint; Spider Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 C.V. Joint, Front Part Number: 26037364
$272.97 MSRP: $494.06
You Save: $221.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26020728
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 C.V. Joint, Front Part Number: 26062620
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Shaft CV; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Inner CV Joint, Front Part Number: 26062617
Product Specifications
- Other Name: Spider Kit, Front Wheel Drive Axle; CV Joint; Spider Assembly
- Position: Front
- Replaced by: 15295246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Inner CV Joint, Front Part Number: 15295246
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Outer CV Joint; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056765, 26062617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

Chevrolet K3500 CV Joint

Want to cut long-term maintenance and repair costs? Choose OEM CV Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet K3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet K3500 CV Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

One of those serious parts is called Chevrolet K3500 CV Joint which can be characteristic of the Chevrolet K3500 series that was produced since 1988 to 2002. A component of the drive train, the CV Joint is provided to transfer torque effectively from the transmission to the drive wheels; further, it can allow suspension movement and steering angles. The Chevrolet K3500 has different types of CV joints named as Rzeppa as well as the tripod types with differential shims for high raise output and axial shift. Such joints are surrounded by rubber guards that shield the joints from dust and water, hence the need to service them to avoid joint breakdown. The Chevrolet K3500 Utilizing Vortec family of engines, the truck has a strong built and also enjoys the improvements in efficiency and safety boost from CV Joints. This compatibility with various K3500 models implies that the drivers are guaranteed of steady performance regardless of the task that has to be accomplished or even for the usual operations. Other aspects of the Chevrolet K3500 CV Joint like CVT constant speed, rev up the fame and recognition of the product in the automobile industry. In conclusion, the Chevrolet K3500 CV Joint is noteworthy as a demonstration of Chevrolet's dedication to the means of providing the auto industry with high quality products thus propelling the K3500 to great heights as a symbol of functionality and strength.

Chevrolet K3500 CV Joint Parts and Q&A

Inner CV Joint, Front
84814583
Q: How to replace the inner CV Boot and CV Joint on Chevrolet K3500?
A:
Start by collecting snap ring pliers (J8059) along with seal clamp tool (J35910) and split plate swage clamp for k10 models (J36652-98) and split plate swage clamp for k20/k30 models (J36652-1). You need four tools for this repair: snap ring pliers (J8059), seal clamp tool (J35910), split plate swage clamp for k10 models (J36652-98), and split plate swage clamp for k20/k30 models (J36652-1). Check the transmission sealing surface of the halfshaft for corrosion before cleaning it with 320 grit cloth if needed. A hand grinder should cut through the swage ring in order to remove the tripot housing without damaging it. After removing the housing completely degrease it thoroughly. When handling the tripot spider assembly maintain careful movements because separation of tripot balls and needle rollers will occur. After removing the boot clamp with side cutters evacuate the spider spacer ring by using snap ring pliers (J8059). Clear the halfshaft bar by cleaning it with a wire brush after removing the spacer ring , spider assembly , and tripot boot . All components must undergo examination for damage and wear before replacing them with new parts. To install the new small boot clamp on the joint boot use the seal clamp tool (J35910) at 136 nm (100 ft. Lbs.) torque. Position the convolute retainer properly across the inboard joint boot before installing the tripot spider assembly and spacer ring onto the halfshaft bar. Begin by filling the tripot housing and boot with grease supplied for packing. After reassembly ensure the swage ring achieves correct alignment. Place mount the split plate swage clamp (J36652) into a vise position and install your model-specific clamp before verifying the inboard stroke position. Apply torque to the clamp bolts while alternating each bolt until fastened, afterward remove both the boot's convolute retainer and halfshaft assembly.