How to Service and Repair an 11 Inch Rear Axle Shaft on Chevrolet K3500?

To service and repair the rear shaft axle of the 11 inch axle, remove the axle cap bolts and tap the cap loosely using a hammer with a soft face and to loosen the gasket. To start the process, using a locking plier grip the rib on the Axle Shaft and turn it to remove, then pull the Axle Shaft out of the tube. Clean off old rtv or gasket and clean out the hub assembly well. Examine the shaft for any bends and verify the shaft spline for chips, burrs, cracking or excessive wear and replace any damaged components when necessary. If installing, position the Axle Shaft with rtv or the gasket ensuring the shaft splines engage the differential side gear. Mount the axle cap and bolt it securely with a torque of 20 nm (15 ft. Lbs).

How to Remove and Install an Axle Shaft for a 10.5 Inch Rear Axle on Chevrolet K3500?

The first part of fixing the rear Axle Shaft is to take off all the bolts (6). Rap the Axle Shaft flange gently with a soft-faced hammer to unlock the shaft, then grip the Axle Shaft rib with a locking plier and twist to commence taking the shaft off (5). Get rid of the Axle Shaft (1) through the tube and wash out its flange. Remove both the gasket (4) and the rtv next and wash the outside face of the hub assembly (3) after that. Go over every part and change it if needed. While placing the shaft, put gasket or rtv on the shaft (4) and move the shaft side gear splines correctly so they are in line with the shaft flange and hub (3) holes. Put in each bolt (6) and fasten it to the required torque of 150 nm (110 ft. Lbs.).

OEM Chevrolet K3500 Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

34 Axle Shafts found

View related parts
Chevrolet K3500 Pinion Shaft, Front Passenger Side Part Number: 19121909
$144.68 MSRP: $353.04
You Save: $208.36 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Inner Shaft; Shaft
- Position: Passenger Side
- Replaces: 15521907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Front Passenger Side Part Number: 19121908
$230.58 MSRP: $366.09
You Save: $135.51 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Inner Shaft; Shaft
- Position: Passenger Side
- Replaces: 12479219, 15588366, 15801502
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Inner Shaft, Front Part Number: 26033975
$16.83 MSRP: $36.98
You Save: $20.15 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Drive Axle Shifter/Lock; Axle Shaft; Fork Shaft; Shaft
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Front Part Number: 7849332
$46.86 MSRP: $88.00
You Save: $41.14 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft-Front Axle; Shaft; Shaft, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Front Part Number: 7849300
$49.37 MSRP: $92.72
You Save: $43.35 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft-Front Drive; Shaft; Shaft, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Inner Driver Side Part Number: 26059714
$733.73 MSRP: $948.58
You Save: $214.85 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Inner Shaft; Axle Shaft; Outer Shaft
- Position: Driver Side
- Replaced by: 26058806
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Companion Flange Part Number: 88967027
$77.53 MSRP: $121.42
You Save: $43.89 (37%)
Product Specifications
- Other Name: Flange, Propeller Shaft Pinion; Yoke, Propeller Shaft Pinion
- Replaces: 15588336
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Front Driver Side Part Number: 26006824
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Inner Shaft; Outer Shaft
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Front Passenger Side Part Number: 26031836
Product Specifications
- Other Name: Shaft Kit, Front Axle; Axle Shaft; Inner Shaft; Outer Shaft
- Position: Passenger Side
- Replaces: 26009629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shafts, Rear Part Number: 12380993
Product Specifications
- Other Name: Shaft, R/A; Axle Shaft; Shaft, Rear Axle Drive
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Front Part Number: 26056795
Product Specifications
- Other Name: Shaft, Front Wheel Drive; Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Front Passenger Side Part Number: 26059716
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Inner Shaft; Outer Shaft
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Driver Side Part Number: 14035355
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Shaft, Rear Axle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Part Number: 14042690
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Part Number: 15522068
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Output Shaft, Front Driver Side Part Number: 26009627
Product Specifications
- Other Name: Shaft, Front Axle; Axle Shaft; Inner Shaft; Outer Shaft
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Part Number: 26013313
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Front Passenger Side Part Number: 26058832
Product Specifications
- Other Name: Shaft, Front Axle; Output Shaft; Inner Shaft; Outer Shaft
- Position: Passenger Side
- Replaces: 26059713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Part Number: 26010417
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Axle Shaft, Rear Passenger Side Part Number: 14035395
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Shaft, Rear Axle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS

| Page 1 of 2 |Next >

1-20 of 34 Results

Chevrolet K3500 Axle Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Axle Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet K3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet K3500 Axle Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet K3500 Axle Shaft is one of the essential and reliable parts of the Chevrolet K3500 series especially for the models of 1988 to 2002. This core part helps in the change of torque between the differential and the drive wheels for an enhanced movement and steering of the car. Made from steel, the Chevrolet K3500 Axle Shaft rotates independently to enable differential speed for better tractions on the occasions that the vehicle turns during operating hence efficiency is important in any vehicle which is why it is well designed. In the area of the Chevrolet K3500, the solid axle configuration of the vehicle incorporates differential and axle shaft and has a live axle suspension. C-clips or bolts are used to join the axle shafts; those installed inner ends have splines for the connection to the differential side gears. Apart from providing support and guiding the weight of the vehicle and wheels, this design also provides a path for power transfer making the Chevrolet K3500 reliable in the performance of various tasks. Another increase in the performance of the K3500 can be attributed to its versatility in terms of the available engines wherein it can be equipped; one of which is the 7.4L Vortec V8. Modern solutions like Turbo Hydramatic transmission or powerful systems of emission control put the Chevrolet K3500 Axle Shaft into autopilot in the automotive flow and stand as examples of faithful performance and stern build exhibited by Chevrolet. In summary, with the Chevrolet K3500 Axle Shaft, the efficiency and safety of the vehicle are significantly boosted; making this component a reliable part of the Chevrolet K3500 series.

Chevrolet K3500 Axle Shaft Parts and Q&A

Axle Shafts, Rear
12380993
Q: How to Service and Repair an 11 Inch Rear Axle Shaft on Chevrolet K3500?
A:
To service and repair the rear shaft axle of the 11 inch axle, remove the axle cap bolts and tap the cap loosely using a hammer with a soft face and to loosen the gasket. To start the process, using a locking plier grip the rib on the Axle Shaft and turn it to remove, then pull the Axle Shaft out of the tube. Clean off old rtv or gasket and clean out the hub assembly well. Examine the shaft for any bends and verify the shaft spline for chips, burrs, cracking or excessive wear and replace any damaged components when necessary. If installing, position the Axle Shaft with rtv or the gasket ensuring the shaft splines engage the differential side gear. Mount the axle cap and bolt it securely with a torque of 20 nm (15 ft. Lbs).
Companion Flange
88967027
Q: How to Remove and Install an Axle Shaft for a 10.5 Inch Rear Axle on Chevrolet K3500?
A:
The first part of fixing the rear Axle Shaft is to take off all the bolts (6). Rap the Axle Shaft flange gently with a soft-faced hammer to unlock the shaft, then grip the Axle Shaft rib with a locking plier and twist to commence taking the shaft off (5). Get rid of the Axle Shaft (1) through the tube and wash out its flange. Remove both the gasket (4) and the rtv next and wash the outside face of the hub assembly (3) after that. Go over every part and change it if needed. While placing the shaft, put gasket or rtv on the shaft (4) and move the shaft side gear splines correctly so they are in line with the shaft flange and hub (3) holes. Put in each bolt (6) and fasten it to the required torque of 150 nm (110 ft. Lbs.).