Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88967027
Companion Flange

1988-2014 GM

Customer Questions & Expert Answers (19)
GM 88967027 Companion Flange
GM 88967027 Companion Flange
GM 88967027 Companion Flange
  • Part Description
    Flange, Propeller Shaft Pinion
  • Position
    Front
  • Replaces
    15588336
  • Manufacturer
    General Motors
Make sure this part fits
$74.62 MSRP: $118.46
You Save: $43.84 (38%)
1
ADD TO CART

  • 88967027 Companion Flange is Ref No. 31 in the diagram below

    1998 GMC Yukon Companion Flange Diagram for 88967027
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88967027

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1992-1994 Chevrolet BlazerBase, Cheyenne, Silverado, Silverado Sport8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1988-1999 Chevrolet K1500Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet K1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1988-2000 Chevrolet K2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88967027 compatible with my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 88967027 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the installation process for the new gasket and axle shaft for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Place the gasket onto the axle shaft, then insert both the gasket and axle shaft into the axle tube, ensuring the shaft splines mesh with the differential side gear and aligning the holes in the axle flange and gasket with those in the hub.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you seat the lock on the axle shaft for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft and pull the shaft flange outward to seat the lock in the differential gear.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after removing the tire and wheel for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Take out the flange bolts and lightly tap the axle shaft with a soft-faced hammer to loosen it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the holes for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the axle flange bolts, tightening them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after supporting the 2000 Chevrolet K3500? Posted by Customer
    A:
    Remove the differential carrier assembly and then the axle shaft (output shaft), ensuring not to damage the case.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the new pinion shaft locking bolt for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Tighten it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5 inch axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you begin the removal process of the axle shaft for the 2005 Chevrolet Suburban 1500? Posted by Customer
    A:
    Use locking pliers to grip the rib on the axle shaft flange and twist it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the procedure for axles with a locking differential for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    For those with a locking differential, withdraw the shaft partially and rotate the case until the pinion shaft touches the housing. Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Twist to begin the removal and then take out the axle shaft from the tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should you do after inserting the axle shaft and gasket for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Align the holes in the axle flange and gasket with those in the hub, and install the axle flange bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after removing the tire and wheel for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Take out the flange bolts and lightly tap the axle shaft with a soft-faced hammer to loosen it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the axle flange bolts for the 11.5 inch axle for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Tighten them to 185 N.m (136 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    Why is it important not to rotate the axle shaft during removal for the 2004 GMC Yukon? Posted by Customer
    A:
    Rotating the axle shaft can cause misalignment of the gears, complicating reassembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after tightening the bolts and nut for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the drift from the rotor, install the drive axle center cap if equipped, reattach the stabilizer shaft link, install the wheel and tire assembly, and finally lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after aligning the pinion shaft for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the new pinion shaft locking bolt, tightening it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5/9.6LD inch axle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you loosen the axle shaft for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Lightly tap the axle shaft with a soft-faced hammer.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Companion Flange 88967027 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88967027 Companion Flange is available in the market under the name GM Axle Shaft, Slip Yoke, Driveshaft Yokes. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88967027 Companion Flange fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 88967027 maintains top performance when functioning as the Flange, Propeller Shaft Pinion unit at its Front. The component 88967027 is constructed from durable material and its dimensions span 6.8 x 4.8 x 4.5 inches while weighing 2.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Yoke, Propeller Shaft Pinion. The part 88967027 has available replacement options 15588336. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.