How to replace the Electric Cooling Fan Motor on Chevrolet Impala?

It is necessary to begin by keeping all body parts along with tools and clothing away from the electric fan inside the underhood compartment since this fan possesses the capacity to activate even after the engine turns off. The first step consists of disconnecting the Fan Shroud along with managing the Fan Blade to stop its rotation. The ge-47827 (GE-47827) socket enables users to reverse the direction of Fan Motor drive plate movement against the arrow on the Fan Blade until complete disengagement occurs. Garage technicians need to throw away the Fan Blade after securing all cooling Fan Motor entry points through tape coverage against debris entry. Use center punching to mark each rivet on the motor rear before drilling their heads with a 6.35 mm (0.25 in) drill bit to effectively remove them from the Fan Shroud. You should remove the Fan Motor from the shroud to blow off debris before you remove tape covering the entry points. Place the new engine cooling Fan Motor against the Fan Shroud before inserting bolts from the front side and tightening the cooling Fan Motor nuts to 6 n.m (53 lb in). Heat the new Fan Blade hub for at least one full minute at 49°c (120°F) in hot tap water before placing it on the Fan Motor drive plate while gripping to avoid blade rotation. Draw the Fan Motor drive plate with ge-47827 (GE-47827) socket while it faces the same direction as the arrow on the Fan Blade blade until it fully engages. Before reinstalling the Fan Shroud assembly to the vehicle you must check the cooling Fan Blade rotation then install.

OEM Chevrolet Impala Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fan Motors found

View related parts
Chevrolet Impala Fan Motor Part Number: 89018696
$125.97 MSRP: $258.88
You Save: $132.91 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 89018692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 89018695
$87.49 MSRP: $259.00
You Save: $171.51 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Fan & Motor Part Number: 22137318
$91.86 MSRP: $188.78
You Save: $96.92 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Fan Motor; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 22120616, 22081940, 22092353
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 89019111
$108.73 MSRP: $217.44
You Save: $108.71 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88956881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | Base, LS, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 22136414
$37.46 MSRP: $110.88
You Save: $73.42 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 89018690
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 88890735
$107.26 MSRP: $191.54
You Save: $84.28 (44%)
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 12368631, 12368626, 12368622, 12367229, 22134444, 12368625, 22137037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 89019110
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88987272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | Base, LS, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Fan Motor Part Number: 89019109
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88987271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | Base, LS, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Impala Fan Motor

Want to cut long-term maintenance and repair costs? Choose OEM Fan Motor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Fan Motor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Fan Motor is a rather crucial item that helps increase the general dependability and performance of the vehicle. This particular Fan Motor is instrumental in the cooling setup of several Chevrolet Impala models and facilitates the proper functioning of the car's cooling fan, thus helping regulate the temperature of the car's engine. The function of the Fan Motor is also to allow the flow of air for the radiator; thus, functioning as an incredible factor in the vehicle's efficiency as well as safety. Chevrolet Impala has been produced over the years with different generations and for every generation, there was a Fan Motor that corresponded to the cooling requirements of that particular generation. This adaptability shows that the Chevrolet Impala is dedicated to performance, for the Fan Motor changes the capacity of the car's operation. Indeed, the Fan Motor boasts of its sturdiness and efficiency in service; therefore, it stands out as one of the trademark inventions in the automotive industry today. This is made possible through its design that allows it to endure the tests of time and at the same time perform a given job as may be required in day to day driving. In the same regard, the Fan Motor is Universal, and it is appropriate for several Impala models; those in charge of the maintenance needs to head to this store. Fan Motor is one of the examples that show how the company tries to combine functionality with reliability allowing enhancing the reputation of the Impala as a full-sized sedan.

Chevrolet Impala Fan Motor Parts and Q&A

Fan Motor
89018696
Q: How to replace the Electric Cooling Fan Motor on Chevrolet Impala?
A:
It is necessary to begin by keeping all body parts along with tools and clothing away from the electric fan inside the underhood compartment since this fan possesses the capacity to activate even after the engine turns off. The first step consists of disconnecting the Fan Shroud along with managing the Fan Blade to stop its rotation. The ge-47827 (GE-47827) socket enables users to reverse the direction of Fan Motor drive plate movement against the arrow on the Fan Blade until complete disengagement occurs. Garage technicians need to throw away the Fan Blade after securing all cooling Fan Motor entry points through tape coverage against debris entry. Use center punching to mark each rivet on the motor rear before drilling their heads with a 6.35 mm (0.25 in) drill bit to effectively remove them from the Fan Shroud. You should remove the Fan Motor from the shroud to blow off debris before you remove tape covering the entry points. Place the new engine cooling Fan Motor against the Fan Shroud before inserting bolts from the front side and tightening the cooling Fan Motor nuts to 6 n.m (53 lb in). Heat the new Fan Blade hub for at least one full minute at 49°c (120°F) in hot tap water before placing it on the Fan Motor drive plate while gripping to avoid blade rotation. Draw the Fan Motor drive plate with ge-47827 (GE-47827) socket while it faces the same direction as the arrow on the Fan Blade blade until it fully engages. Before reinstalling the Fan Shroud assembly to the vehicle you must check the cooling Fan Blade rotation then install.