How to Replace a Rack and Pinion Boot for Off Vehicle on Chevrolet Equinox?

Begin boot replacement by removing both Rack And Pinion outer tie rod ends on the vehicle before continuing. Start by removing the steering gear and afterward do a complete removal of the steering gear inner tie rod nuts. Separate the steering gear boot clamp from the steering gear boot while cutting through and discarding the clamp piece. Check the inner tie rod for both contamination and corrosion after removing the boot. The repair should continue when no damage is present. Begin by washing away all grease and debris from the contact points of the steering gear inner tie rod together with the boot. Put 3/4 of the supplied grease packet into the boot cavity's small end while the remaining 1/4 goes onto the shaft where the boot connects where it ensures the boot fits strongly into the steering gear housing groove. Fit the steering gear boot with the clamp's large end loosely attached before applying j 22610 to secure the crank while ensuring the boot's small end remains properly set in the inner Tie Rod End groove. Secure the steering gear boot clamp to the gear followed by installing inner tie rod nuts spaced 174 mm (6.85 in) from the clamp position. Insert the steering gear unit followed by the Rack And Pinion outer tie rod ends back into the system. Before finishing the installation the power steering system should get filled and bled while simultaneously checking the front wheel alignment with adjustments if needed.

OEM Chevrolet Equinox Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Rack and Pinion Boots found

View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 84924894
$64.11 MSRP: $105.60
You Save: $41.49 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Equinox | LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 23479355
$23.44 MSRP: $38.63
You Save: $15.19 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Equinox | L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 19209363
$128.66 MSRP: $204.26
You Save: $75.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 19149838
$21.29 MSRP: $33.81
You Save: $12.52 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 15225591
Product Specifications
- Other Name: Boot Kit, Tie Rod End Dust; Power Steering Cylinder Boot; Rack and Pinion Bellows Kit.; Boot Kit; Boot Kit, Steering Tie Rod
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Tie Rod Boot Part Number: 19210062
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Chevrolet Equinox Rack and Pinion Boot

Want to cut long-term maintenance and repair costs? Choose OEM Rack and Pinion Boot. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Rack and Pinion Boot includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Rack and Pinion Boot in Chevrolet Equinox vehicles plays an important safety purpose in protection of the steering rack from dust and debris. It is a rubber like flap that closes the ends of the rack, so as to preserve the cleanliness and functioning of the mechanisms inside. Damage or crack to the Rack and Pinion Boot puts the whole rack and pinion system into risk of failure if not well managed. Different Rack and Pinion Boots may have been used in different Equinox models in the years passed, however individual types are not specified. The primary function remains consistent: to protect the steering system from externalal intrusion which could degrade the performance of the system. The Rack and Pinion Boot is essential for the durability and reliability of the steering system of the car.

Chevrolet Equinox Rack and Pinion Boot Parts and Q&A

Tie Rod Boot
19149838
Q: How to Replace a Rack and Pinion Boot for Off Vehicle on Chevrolet Equinox?
A:
Begin boot replacement by removing both Rack And Pinion outer Tie Rod Ends on the vehicle before continuing. Start by removing the steering gear and afterward do a complete removal of the steering gear inner tie rod nuts. Separate the steering gear boot clamp from the steering gear boot while cutting through and discarding the clamp piece. Check the inner tie rod for both contamination and corrosion after removing the boot. The repair should continue when no damage is present. Begin by washing away all grease and debris from the contact points of the steering gear inner tie rod together with the boot. Put 3/4 of the supplied grease packet into the boot cavity's small end while the remaining 1/4 goes onto the shaft where the boot connects where it ensures the boot fits strongly into the steering gear housing groove. Fit the steering gear boot with the clamp's large end loosely attached before applying j 22610 to secure the crank while ensuring the boot's small end remains properly set in the inner Tie Rod End groove. Secure the steering gear boot clamp to the gear followed by installing inner tie rod nuts spaced 174 mm (6.85 in) from the clamp position. Insert the steering gear unit followed by the Rack And Pinion outer tie rod ends back into the system. Before finishing the installation the power steering system should get filled and bled while simultaneously checking the front wheel alignment with adjustments if needed.