How to Replace the Brake Disc on Chevrolet Colorado?

Before starting work raise your vehicle and place supports under it. Take off the tire and wheel unit before disassembling the wheel bearing and hub pieces. Put the Brake Disc assembly onto wooden blocks for safe handling that protects the friction materials. While keeping the assembly supported you should take out the 6 Wheel Hub bolts to split the Wheel Hub from the Brake Disc. Prepare both Wheel Hub and Brake Disc surfaces by scrubbing off all dust and rust particles. Take steps to eliminate dirt and rust before installing the hub/axle flange and disc to stop brake pulsation due to excessive lro buildup. Check if small debris remains in the Brake Disc contact zone. Install the Wheel Hub onto the Brake Disc and fasten it with loose hand tools by tightening all 6 bolts to 120 nm (89 lb ft). Replace the wheel bearing and hub setup then add the tire and wheel unit.

How to Service and Repair the Brake Disc Using the CH-47661 On-Brake Lathe on Chevrolet Colorado?

You should use the CH-47661 On-Vehicle Brake Lathe to refinish brake discs when any of the following conditions exist: excessive groove depth, severe disc surface scoring, or brake pulse issues resulting from lateral runout and thickness variation and surface corrosion. Start by using a micrometer to determine the narrowest section of the brake disc. Replacement of the brake disc is necessary when its current thickness exceeds the established minimum standard. Before finishing the disc with the lathe make sure to create a non-directional surface by using 120 grit aluminum oxide sandpaper together with a non-directional finisher when available. To finish the process clean the braking areas with GM P/N 12377981 (Canadian P/N 10953463) brake parts cleaner or any equivalent product.

OEM Chevrolet Colorado Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Discs found

View related parts
Chevrolet Colorado Rotor Part Number: 94775725
$130.77 MSRP: $253.80
You Save: $123.03 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 23387173
$104.66 MSRP: $203.14
You Save: $98.48 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 94778644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 85158898
$113.22 MSRP: $221.66
You Save: $108.44 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Replaces: 84703914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 84309171
$91.68 MSRP: $177.93
You Save: $86.25 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 13549409
$89.11 MSRP: $161.29
You Save: $72.18 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Rotor, Rear Part Number: 13539733
$89.53 MSRP: $168.14
You Save: $78.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Rotor, Front Part Number: 25832146
Product Specifications
- Other Name: Rotor Assembly-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Rotor Part Number: 89040374
$111.66 MSRP: $200.27
You Save: $88.61 (45%)
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

Chevrolet Colorado Brake Disc

Want to cut long-term maintenance and repair costs? Choose OEM Brake Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Brake Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Colorado has brake disc, which is a crucial component of the braking system; thereby, the brake disc in combination with the brake pads helps pedal the truck and bring it to a standstill. If the brake pedal is pressed the pads move to the area surrounding the Brake Disc and apply enough friction to slow or halt the wheels. Constructed from gray iron these discs can also incorporate modern materials such carbon fiber or ceramic matrix in high end vehicles due to the discs high operating temperatures and the need for reduced weight. Through the years Chevrolet Colorado has used drilled and slotted brake disc especially for enhanced heat dissipation and minimal noise at the expense of increased pad wear. The discs are two-piece: the friction ring is separated from the center section in order to improve weight and thermal properties. It is important to state that such problems as warping, cracking, or rusting can undermine the braking performance, it is why frequent inspections and pad change are required for the vehicle safe handling.

Chevrolet Colorado Brake Disc Parts and Q&A

Rotor, Front
25832146
Q: How to Replace the Brake Disc on Chevrolet Colorado?
A:
Before starting work raise your vehicle and place supports under it. Take off the tire and wheel unit before disassembling the wheel bearing and hub pieces. Put the Brake Disc assembly onto wooden blocks for safe handling that protects the friction materials. While keeping the assembly supported you should take out the 6 Wheel Hub bolts to split the Wheel Hub from the Brake Disc. Prepare both Wheel Hub and Brake Disc surfaces by scrubbing off all dust and rust particles. Take steps to eliminate dirt and rust before installing the hub/axle flange and disc to stop brake pulsation due to excessive lro buildup. Check if small debris remains in the Brake Disc contact zone. Install the Wheel Hub onto the Brake Disc and fasten it with loose hand tools by tightening all 6 bolts to 120 nm (89 lb ft). Replace the wheel bearing and hub setup then add the tire and wheel unit.
Rotor
89040374
Q: How to Service and Repair the Brake Disc Using the CH-47661 On-Brake Lathe on Chevrolet Colorado?
A:
You should use the CH-47661 On-Vehicle Brake Lathe to refinish brake discs when any of the following conditions exist: excessive groove depth, severe disc surface scoring, or brake pulse issues resulting from lateral runout and thickness variation and surface corrosion. Start by using a micrometer to determine the narrowest section of the brake disc. Replacement of the brake disc is necessary when its current thickness exceeds the established minimum standard. Before finishing the disc with the lathe make sure to create a non-directional surface by using 120 grit aluminum oxide sandpaper together with a non-directional finisher when available. To finish the process clean the braking areas with GM P/N 12377981 (Canadian P/N 10953463) brake parts cleaner or any equivalent product.