How to properly service and replace a wheel cylinder on Chevrolet Colorado?

Start the Wheel Cylinder replacement by raising the vehicle and taking out the rear brake shoes. When removing a Wheel Cylinder to avoid brake damage plug the Brake Line before disconnecting it. Remove all mounting bolts on the Wheel Cylinder then detach the unit from the backing plate. Join the new Wheel Cylinder onto the backing plate and fasten it with the mounting bolts before applying 18 n.m (13 lb ft) of torque. Insert the Brake Line into the Wheel Cylinder and fasten it with a 19 n.m torque setting (14 lb ft). Replace the parts then install the new brake shoes while using proper bleeding methods for the brake system before testing the fluid level in the brake master cylinder.

OEM Chevrolet Colorado Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Cylinders found

View related parts
Chevrolet Colorado Wheel Cylinder Part Number: 25832114
$43.51 MSRP: $77.71
You Save: $34.20 (45%)
Product Specifications
- Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Wheel Cylinder, Rear Part Number: 19213348
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 89058902
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

Chevrolet Colorado Wheel Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Wheel Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Colorado Wheel Cylinder is active mechanism the puts pressure on the brake shoe in a way to make it clamp on to the brake drum so as to reduce or stop the vehicle's movement. This hydraulic system using the pistons and rubber seals in a cylinder that enable it to operate like a push/pull system to produce the friction needed for Brake. The wheel cylinder is usually made up of aluminum thus avoiding rusting, and guaranteeing performance for a long time. In the case of Chevrolet Colorado, a wheel cylinder that is in a bad shape or is leaking will compromise on the braking force and would be unsafe for use on the roads. It is very necessary that these are checked and supervised frequently or at least annually to clear any barrier that may hinder smooth functioning. Depending on the extent of the problem and if the wheel cylinder has to be replaced, then a rebuild kit is used which comes with new seals, boots and springs. Frequently solving such problems, drivers can keep the specified level of braking in their Chevrolet Colorado cars.

Chevrolet Colorado Wheel Cylinder Parts and Q&A

Wheel Cylinder, Rear
19213348
Q: How to properly service and replace a wheel cylinder on Chevrolet Colorado?
A:
Start the Wheel Cylinder replacement by raising the vehicle and taking out the rear Brake Shoes. When removing a Wheel Cylinder to avoid brake damage plug the Brake Line before disconnecting it. Remove all mounting bolts on the Wheel Cylinder then detach the unit from the backing plate. Join the new Wheel Cylinder onto the backing plate and fasten it with the mounting bolts before applying 18 n.m (13 lb ft) of torque. Insert the Brake Line into the Wheel Cylinder and fasten it with a 19 n.m torque setting (14 lb ft). Replace the parts then install the new brake shoes while using proper bleeding methods for the brake system before testing the fluid level in the brake master cylinder.