How to service the rear suspension shock absorber on Chevrolet Camaro?

The service process of rear suspension Shock Absorber starts by folding the rear seatback then removing the quarter trim panel. Before work begins raise the vehicle and fold the carpet back while making sure it will keep the suitable support. A properly positioned adjustable jack stand must support the rear axle before taking out the Shock Absorber nut because this action protects the brake hose lines and Tie Rod and propeller shaft from harm. The Shock Absorber insulator retainer and insulator need to be unfastened before the Shock Absorber lower retainer and insulator can be taken off. The Shock Absorber nut from the rear axle needs removal to complete the Shock Absorber extraction. The Shock Absorber installation starts with attaching the rear axle Shock Absorber stud and tightening the Shock Absorber nut to 90 nm (66 ft. Lbs.). Put the Shock Absorber lower insulator and retainer onto the Shock Absorber and pass the Shock Absorber through the underbody pan before setting the insulator. The Shock Absorber receives insulated and retained components of the Shock Absorber so the Shock Absorber remains fixed until the technician tightens the Shock Absorber nut to 17 nm (13 ft. Lbs.). To complete the process remove the rear axle support while lowering the vehicle before putting back the installed quarter trim panel followed by extending the rear seatback into its upright position.

How should you safely handle gas charged shock absorbers to prevent personal injury during maintenance on Chevrolet Camaro?

Removing the snap ring from the gas charged shock absorber tube's top section places users at risk of severe injuries because the released contents will fire out at high speeds. Safety glasses must be worn during centerpunching and drilling of shock absorbers to avoid injuring yourself and to stop damaging the shock absorber tube. First create a 10 mm (0.4 inch) sharp mark at the tube bottom using a centerpunch device. Position the shock absorber rod in a horizontal vise based orientation while extending it to reach its maximum length. Use a 5 mm (3/16 inch) drill bit to punch a hole into the center mark of the tube but direct the drilling through a shop towel to prevent oil leaks. To create the second hole space a centerpunch in the middle of the tube. Then use the same drill bit to make the hole at this location while utilizing shop towels for oil containment. After removing the shock absorber from the vise position you should maintain the absorber horizontally over a drain pan while orienting its holes downward and manipulating the rod motion inside the tube to drain all remaining oil.

OEM Chevrolet Camaro Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

77 Shock Absorbers found

View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84084729
$124.33 MSRP: $233.48
You Save: $109.15 (47%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Strut; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 23382416
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84084731
$127.09 MSRP: $230.03
You Save: $102.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 23509102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Part Number: 22809066
$112.87 MSRP: $291.43
You Save: $178.56 (62%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut Kit; Complete Strut; Strut; Absorber, Front And Rear Suspension; Shock
- Position: Rear
- Replaced by: 19436398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Passenger Side Part Number: 84646916
$557.54 MSRP: $1009.13
You Save: $451.59 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut, Passenger Side Part Number: 85649815
$470.39 MSRP: $912.92
You Save: $442.53 (49%)
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension
- Position: Passenger Side
- Replaces: 84421288, 84115888, 84943061, 23365783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber Part Number: 88945178
$44.62 MSRP: $79.68
You Save: $35.06 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22046806, 22046438, 22064414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1999 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84084725
$124.33 MSRP: $233.48
You Save: $109.15 (47%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 23382412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut, Passenger Side Part Number: 85115463
$105.92 MSRP: $198.91
You Save: $92.99 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Shock Absorber
- Position: Passenger Side
- Replaces: 23509101, 84382050
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut, Driver Side Part Number: 85115466
$102.52 MSRP: $199.00
You Save: $96.48 (49%)
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension
- Position: Driver Side
- Replaces: 23420871, 84382053
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut Part Number: 19300042
$567.06 MSRP: $1110.24
You Save: $543.18 (49%)
ADD TO CART
Product Specifications
- Other Name: Absorber, Front And Rear Suspension; Shock Absorber
- Position: Rear
- Replaces: 20942615
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Camaro | LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut, Passenger Side Part Number: 85115467
$106.93 MSRP: $207.56
You Save: $100.63 (49%)
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension
- Position: Passenger Side
- Replaces: 23420872, 84382054
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Passenger Side Part Number: 84559878
$1476.89 MSRP: $2773.49
You Save: $1296.60 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Replaces: 84331750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut Assembly, Front Driver Side Part Number: 84559875
$1649.53 MSRP: $3097.70
You Save: $1448.17 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front Suspension (W/Spring); Shock Absorber; Strut; Strut, Front Chassis
- Position: Front Driver Side
- Replaces: 84331745, 84384331
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Part Number: 84520911
$103.24 MSRP: $188.50
You Save: $85.26 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Absorber, Front And Rear Suspension
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84559877
$1354.64 MSRP: $2543.91
You Save: $1189.27 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 84331749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Passenger Side Part Number: 84084736
$124.60 MSRP: $225.52
You Save: $100.92 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Passenger Side
- Replaces: 23509107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Strut, Driver Side Part Number: 84382047
$101.56 MSRP: $190.72
You Save: $89.16 (47%)
ADD TO CART
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Shock Absorber
- Position: Driver Side
- Replaced by: 85115460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Part Number: 84520909
$114.70 MSRP: $215.38
You Save: $100.68 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Absorber, Front And Rear Suspension
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84084735
$127.09 MSRP: $230.03
You Save: $102.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock; Absorber, Front And Rear Suspension
- Position: Rear Upper Driver Side
- Replaces: 23509106
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Shock Absorber, Rear Upper Driver Side Part Number: 84219920
$331.12 MSRP: $677.92
You Save: $346.80 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Shock (W/Upper Mount); Shock
- Position: Rear Upper Driver Side
- Replaced by: 85649835
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS

| Page 1 of 4 |Next >

1-20 of 77 Results

Chevrolet Camaro Shock Absorber

Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Shock Absorber in Chevrolet Camaro cars is involved in the suspension system that mainly aims at reducing violent vibrations felt by the passengers as well as maintaining a good quality ride. It extinguishes kinetic energy as heat while at the same time attenuating shock impulses- that is all to do with the increased maneuverability in the rough ground. In Chevrolet Camaro models, a number of different Shock Absorbers have been used for example twin-tube and mono-tube gas Shock Absorbers. Twin-tube shocks are usual and can consist of simple construction which can be charged by gas to enhance the long-lasting ones. Mono-tube shocks on the other hand are better than twin-tube shocks in terms of heat transfer and performance that allows them to be installed in various directions. Other new technologies include the Position Sensitive Damping and magnetorheological dampers that still improves the Shock Absorber to certain driving conditions making the ride in the new Chevrolet Camaro both comfortable and responsive.

Chevrolet Camaro Shock Absorber Parts and Q&A

Shock Absorber
10443949
Q: How to service the rear suspension shock absorber on Chevrolet Camaro?
A:
The service process of rear suspension Shock Absorber starts by folding the rear seatback then removing the quarter trim panel. Before work begins raise the vehicle and fold the carpet back while making sure it will keep the suitable support. A properly positioned adjustable jack stand must support the rear axle before taking out the Shock Absorber nut because this action protects the brake hose lines and Tie Rod and propeller shaft from harm. The Shock Absorber insulator retainer and insulator need to be unfastened before the Shock Absorber lower retainer and insulator can be taken off. The Shock Absorber nut from the rear axle needs removal to complete the Shock Absorber extraction. The Shock Absorber installation starts with attaching the rear axle Shock Absorber stud and tightening the Shock Absorber nut to 90 nm (66 ft. Lbs.). Put the Shock Absorber lower insulator and retainer onto the Shock Absorber and pass the Shock Absorber through the underbody pan before setting the insulator. The Shock Absorber receives insulated and retained components of the Shock Absorber so the Shock Absorber remains fixed until the technician tightens the Shock Absorber nut to 17 nm (13 ft. Lbs.). To complete the process remove the rear axle support while lowering the vehicle before putting back the installed quarter trim panel followed by extending the rear seatback into its upright position.
Shock Absorber, Front
22199128
Q: How should you safely handle gas charged shock absorbers to prevent personal injury during maintenance on Chevrolet Camaro?
A:
Removing the snap ring from the gas charged shock absorber tube's top section places users at risk of severe injuries because the released contents will fire out at high speeds. Safety glasses must be worn during centerpunching and drilling of shock absorbers to avoid injuring yourself and to stop damaging the shock absorber tube. First create a 10 mm (0.4 inch) sharp mark at the tube bottom using a centerpunch device. Position the shock absorber rod in a horizontal vise based orientation while extending it to reach its maximum length. Use a 5 mm (3/16 inch) drill bit to punch a hole into the center mark of the tube but direct the drilling through a shop towel to prevent oil leaks. To create the second hole space a centerpunch in the middle of the tube. Then use the same drill bit to make the hole at this location while utilizing shop towels for oil containment. After removing the shock absorber from the vise position you should maintain the absorber horizontally over a drain pan while orienting its holes downward and manipulating the rod motion inside the tube to drain all remaining oil.