How to replace the inner tie rod on Chevrolet Camaro?

The vehicle repair process requires the user to elevate the vehicle with safety stands while working on the inner Tie Rod replacement. Start the procedure by removing the wheel assembly with tire and the Rack and Pinion Boot. The rack bearing preload adjustment needs to stay unchanged before taking off the inner Tie Rod since this will safeguard both the pinion and steering rack from damage. Proceed by taking off the shock dampener from the inner Tie Rod and then reinsert it back onto the rack assembly. When removing the inner Tie Rod it is vital to avoid touching the steering rack since preload adjustment changes have not occurred. Make use of j 34028 inner Tie Rod wrench (J 34028) to apply a wrench on the flats of the inner Tie Rod housing while rotating it counterclockwise until the inner Tie Rod detaches from the rack assembly . The threads of the rack and inner Tie Rod need cleaning before applying lactated 262 (or equivalent) to the inner Tie Rod threads . Use a torque wrench equipped with j 34028 (J 34028) to fasten the inner Tie Rod to the Rack And Pinion by applying torque to 100 nm (74 ft. Lbs.) but maintain continuous pressure on the rack during the procedure. Putting the shock dampener onto the inner Tie Rod housing until it reaches its full length will allow you to add the Rack and Pinion Boot and tire and wheel assembly. Before concluding the work you should remove safety stands and lower the vehicle to inspect wheel alignment.

OEM Chevrolet Camaro Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Tie Rods found

View related parts
Chevrolet Camaro Outer Tie Rod, Driver Side Part Number: 22961953
$90.12 MSRP: $154.77
You Save: $64.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer Driver Side
- Replaced by: 87827846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Camaro | LS, LT, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Outer Tie Rod Part Number: 92241266
$52.23 MSRP: $89.70
You Save: $37.47 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 92227431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Inner Tie Rod Part Number: 23170340
$66.33 MSRP: $112.93
You Save: $46.60 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Replaced by: 87827816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Inner Tie Rod Part Number: 15221006
$71.84 MSRP: $175.34
You Save: $103.50 (60%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner; Rod Kit, Steering Tie Rod Outer
- Position: Inner
- Replaces: 21011026, 26075038, 26034348
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Outer Tie Rod, Passenger Side Part Number: 22961958
$90.12 MSRP: $154.77
You Save: $64.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie
- Position: Passenger Side
- Replaced by: 87827847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Outer Tie Rod, Driver Side Part Number: 22961957
$90.12 MSRP: $154.77
You Save: $64.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie
- Position: Driver Side
- Replaced by: 87827846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Outer Tie Rod Part Number: 84494628
$38.78 MSRP: $94.65
You Save: $55.87 (60%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 22776539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Inner Tie Rod Part Number: 22976767
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 22776540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Tie Rod, Outer Part Number: 21011027
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer; Rod, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26026743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Outer Tie Rod Part Number: 7837614
Product Specifications
- Other Name: Rod Kit, Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Outer Tie Rod Kit; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Inner Tie Rod Part Number: 7837598
Product Specifications
- Other Name: Rod Kit, Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Tie Rod

Want to cut long-term maintenance and repair costs? Choose OEM Tie Rod. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Tie Rod includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Camaro Tie Rod stands as the reliable steering system component which operates throughout multiple Camaro vehicle models. By connecting the steering gear to steering knuckles and front wheels the critical part transfers steering wheel movement to vehicle directional changes. Different tie rod assemblies appear in Chevrolet Camaro vehicles starting from 1967 through current times with their application between rack & pinion or parallelogram steering systems. Ball joints in the Tie Rod design enable necessary movement when performing steering or suspending adjustments thus boosting operational efficiency together with safety measures. The safety of Chevrolet Camaro steering depends largely on regular Tie Rod inspections since an excessive amount of wear causes Smooth-play which jeopardizes safety measures. Beyond standard operations the Tie Rod stands vital because it sustains the Camaro's driving performance and delivers people responsive handling with stable control. Special features of the Chevrolet car Tie Rod consist of robust engineering which performs well during high-performance activities and precise construction which improves the total driving experience. The durability along with effectiveness of the Chevrolet model Tie Rod positions it as a leading automotive component that enthusiasts and regular drivers confidently select.

Chevrolet Camaro Tie Rod Parts and Q&A

Inner Tie Rod
15221006
Q: How to replace the inner tie rod on Chevrolet Camaro?
A:
The vehicle repair process requires the user to elevate the vehicle with safety stands while working on the inner Tie Rod replacement. Start the procedure by removing the wheel assembly with tire and the Rack and Pinion Boot. The rack bearing preload adjustment needs to stay unchanged before taking off the inner Tie Rod since this will safeguard both the pinion and steering rack from damage. Proceed by taking off the shock dampener from the inner Tie Rod and then reinsert it back onto the rack assembly. When removing the inner Tie Rod it is vital to avoid touching the steering rack since preload adjustment changes have not occurred. Make use of j 34028 inner Tie Rod wrench (J 34028) to apply a wrench on the flats of the inner Tie Rod housing while rotating it counterclockwise until the inner Tie Rod detaches from the rack assembly . The threads of the rack and inner Tie Rod need cleaning before applying lactated 262 (or equivalent) to the inner Tie Rod threads . Use a torque wrench equipped with j 34028 (J 34028) to fasten the inner Tie Rod to the Rack And Pinion by applying torque to 100 nm (74 ft. Lbs.) but maintain continuous pressure on the rack during the procedure. Putting the shock dampener onto the inner Tie Rod housing until it reaches its full length will allow you to add the Rack and Pinion Boot and tire and wheel assembly. Before concluding the work you should remove safety stands and lower the vehicle to inspect wheel alignment.