What tools are required to service and repair the control arm bushing in the rear suspension on Chevrolet Camaro?

To service and repairing of the Control Arm Bushing in the rear suspension require the tools as follows. The tools include: j 21474-5 (Bushing Receiver) j 21474-23 (Bushing Remover), and j 21474-20 (Front and Rear Bushing Installer). Start with lifting and appropriately supporting the vehicle and rear axle supporting with adjustable jack stand. Remove the lower Control Arm. Secondly, make sure you bolt j 21474-5 (Bushing Receiver) over the flanged side of the bushing. Wearing safety goggles and using an arbor press, align the large outside diameter of j 21474-23 (Bush Remover) on the outside diameter of the outer sleeve, forcing out the bushing from the lower Control Arm. For installation, again put in j 21474-5 (Bushing Receiver) on the flange facet of the bushing then use j 21474-20 (Front and Rear Bushing Installer) to install the bushing. Replace the lower Control Arm, remove the rear axle support, and drop the vehicle down.

How to replace the front lower control arm bushing on Chevrolet Camaro?

To replace the lower one Control Arm front bushing, start at removing the lower Control Arm. Then insert the j 21474-3 screw assembly (J 21474-3) by inserting it into the large part of j 21474-6 lower Control Arm Bushing receiver (J 21474-6) and threading through the front bushing and insert it's open end into the j 39876 lower Control Arm Bushing receiver (J 39876). Then put on the thrust washer to the j21474-3 with the seam against the front bushing, install the j39875 half moon spacer (J39875) around the outer portion of the bushing to prevent metal distortion during pallet removal. All tools in line with the front bushing, Control Arm, then installing the j 21474-4 1/2 inch nut (J 21474-4) tighten to the point where the bushing is completely out and it will have a popping sound. In the assembly, pass the j 21474-3 with the j 21474-5 Control Arm Bushing receiver (J 21474-5) through j 21474-5 and into the front bushing and the lower Control Arm. Mount the j 39876 on the j21474-3 with the open end toward the Control Arm and the j 39875 around the bushing to prevent distortion. Mount the thrust washer on the controllable end of the j 21474-3 with the seam pointing to the Control Arm, align all instruments, and have j 21474-4 mounted on j 21474-3. Finally, tighten till the bushing be straight with the Control Arm and then the lower Control Arm should be put back.

OEM Chevrolet Camaro Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Control Arm Bushings found

View related parts
Chevrolet Camaro Upper Control Arm Bushing Part Number: 92214163
$27.85 MSRP: $40.23
You Save: $12.38 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Control Arm Bushing; Axle Beam Mount
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Trailing Arm Bushing Part Number: 92202986
$6.51 MSRP: $10.19
You Save: $3.68 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Rear Suspension Control Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Upper Control Arm Bushing Part Number: 92214164
$22.84 MSRP: $37.63
You Save: $14.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Control Arm Bushing; Axle Beam Mount
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Crossmember Bushing, Lower Part Number: 23208474
$82.25 MSRP: $135.50
You Save: $53.25 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Axle Support Bushing; Axle Pivot Bushing; Suspension Crossmember Lower Bushing; Suspension Crossmember Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Lower Control Arm Rear Bushing Part Number: 22156434
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Lower Control Arm Front Bushing Part Number: 22145392
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Lower Control Arm Front Bushing Part Number: 17999115
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Lower Control Arm Rear Bushing Part Number: 17999113
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1999 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Lower Control Arm Rear Bushing Part Number: 17999112
Product Specifications
- Other Name: Bushing, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1999 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Camaro Control Arm Bushing is such a part which brings tremendous difference in the Chevrolet Camaro's suspension system as well as its reliability. This control arm bushing's function is to dampen oscillations occurring between the control arm and the vehicle frame while at the same time serving as a pivot at which the control arm moves in response to changes in the terrain and various degrees of steering. Since it suits the Camaro series that has been manufactured between 1967 to 2002 and also from the year 2010 up to now, it means that drivers can be as efficient and safe as possible across generations. The Control Arm Bushing: The Control Arm Bushing is made from a number of miscellaneous including rubber, polyurethane as well as synthetic elastomers depending on the kind of qualities that you want to meet during your driving. This increases the Camaro's maneuverability not only making the car superior in its handling but also making it more comfortable to drive. The Chevrolet Camaro as a vehicle is quite powerful with standard V6 and V8 motors and its Control Arm Bushing ensures durability in addition to handling the car's wheels a lot better. Most noteworthy, the Chevrolet Camaro Control Arm Bushing distinguishes itself in the market considering the high load tolerance and the corresponding enhancement of the overall car dynamics. Thus, being responsible for the wheels' correct position and sensitivity, this Control Arm Bushing is indispensable for Camaro performance tuners and regular users, proving it to be an indispensable link in the entire Camaro chain.

Chevrolet Camaro Control Arm Bushing Parts and Q&A

Lower Control Arm Rear Bushing
22156434
Q: What tools are required to service and repair the control arm bushing in the rear suspension on Chevrolet Camaro?
A:
To service and repairing of the Control Arm Bushing in the rear suspension require the tools as follows. The tools include: j 21474-5 (Bushing Receiver) j 21474-23 (Bushing Remover), and j 21474-20 (Front and Rear Bushing Installer). Start with lifting and appropriately supporting the vehicle and rear axle supporting with adjustable jack stand. Remove the lower Control Arm. Secondly, make sure you bolt j 21474-5 (Bushing Receiver) over the flanged side of the bushing. Wearing safety goggles and using an arbor press, align the large outside diameter of j 21474-23 (Bush Remover) on the outside diameter of the outer sleeve, forcing out the bushing from the lower Control Arm. For installation, again put in j 21474-5 (Bushing Receiver) on the flange facet of the bushing then use j 21474-20 (Front and Rear Bushing Installer) to install the bushing. Replace the lower Control Arm, remove the rear axle support, and drop the vehicle down.
Lower Control Arm Front Bushing
22145392
Q: How to replace the front lower control arm bushing on Chevrolet Camaro?
A:
To replace the lower one Control Arm front bushing, start at removing the lower Control Arm. Then insert the j 21474-3 screw assembly (J 21474-3) by inserting it into the large part of j 21474-6 lower Control Arm Bushing receiver (J 21474-6) and threading through the front bushing and insert it's open end into the j 39876 lower Control Arm Bushing receiver (J 39876). Then put on the thrust washer to the j21474-3 with the seam against the front bushing, install the j39875 half moon spacer (J39875) around the outer portion of the bushing to prevent metal distortion during pallet removal. All tools in line with the front bushing, Control Arm, then installing the j 21474-4 1/2 inch nut (J 21474-4) tighten to the point where the bushing is completely out and it will have a popping sound. In the assembly, pass the j 21474-3 with the j 21474-5 Control Arm Bushing receiver (J 21474-5) through j 21474-5 and into the front bushing and the lower Control Arm. Mount the j 39876 on the j21474-3 with the open end toward the Control Arm and the j 39875 around the bushing to prevent distortion. Mount the thrust washer on the controllable end of the j 21474-3 with the seam pointing to the Control Arm, align all instruments, and have j 21474-4 mounted on j 21474-3. Finally, tighten till the bushing be straight with the Control Arm and then the lower Control Arm should be put back.