How to replace the lower control arm on Chevrolet Blazer?

Start by supporting the vehicle's elevation and then install a safety stand beneath the lower Control Arm for support. Start by taking off the wheel and tire then remove the stabilizer shaft links from the lower Control Arm. First detach the shock absorber lower nut and bolt then remove the torsion bars before removing the wheel drive shaft. Use tools j 43631 Ball Joint separator with j 45851 Ball Joint separator protector adapters to disconnect the lower Ball Joint stud from the Steering Knuckle after removing the lower Ball Joint retaining nut. The work sequence starts with pulling off lower Control Arm nuts paired with 15-series washers followed by lower Control Arm bolts and then moving on to lower Control Arm nuts using 25/35-series washers and finally removing lower Control Arm bolts to extract the whole lower Control Arm. The installation requires positioning the new lower Control Arm followed by 15-series bolt installation and subsequent 25/35-series bolt installation while applying torque to 175 nm (129 ft. Lbs.). After putting the lower Ball Joint stud into the Steering Knuckle assembly you must install the corresponding nut followed by proper torque adjustment to 100 nm (74 ft. Lbs.). You should now install all components in the following order: the torsion bars first, then install the shock absorber lower nut and bolt, and finish by attaching stabilizer shaft links to the lower Control Arm. Reinstall the tire assemblies under the wheel followed by stand removal before vehicle lowering for alignment procedures.

OEM Chevrolet Blazer Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Control Arms found

View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 84892165
$124.69 MSRP: $205.39
You Save: $80.70 (40%)
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm; Arm, Steering Knuckle Lower Control
- Position: Driver Side
- Replaces: 84427981, 84675720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 15003923
$12.16 MSRP: $19.05
You Save: $6.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 12470309, 12383463
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Control Arm, Front Upper Driver Side Part Number: 19416902
$229.09 MSRP: $377.38
You Save: $148.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Front Upper Control; Upper Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Upper Driver Side
- Replaces: 12543947, 12546747, 12376265, 19133653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Rear Part Number: 84382664
$49.23 MSRP: $78.15
You Save: $28.92 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear
- Replaces: 84143517, 84031533
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Passenger Side Part Number: 15777768
$245.18 MSRP: $332.63
You Save: $87.45 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 15018808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Passenger Side Part Number: 84892166
$120.65 MSRP: $205.39
You Save: $84.74 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Replaces: 84427982, 84675721
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Control Arm, Front Upper Passenger Side Part Number: 19416899
$219.74 MSRP: $377.38
You Save: $157.64 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Front Upper Control; Upper Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control; Arm, Steering Knuckle Upper & Lower Control
- Position: Front Upper Passenger Side
- Replaces: 12376266, 19133654, 12543948, 12546748
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Front Passenger Side Part Number: 15665553
Product Specifications
- Other Name: Arm Kit, Front Lower Control; Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Lower Passenger Side
- Replaced by: 15992480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 15777767
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 15018807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm Part Number: 15988034
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Front Lower
- Replaces: 15594134, 12548332
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 12472995
Product Specifications
- Other Name: Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Driver Side
- Replaces: 12361579, 12388443, 12470407, 15578815
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Passenger Side Part Number: 12472994
Product Specifications
- Other Name: Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Passenger Side
- Replaced by: 15777766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 12472993
Product Specifications
- Other Name: Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Driver Side
- Replaced by: 15777765
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Upper Control Arm, Passenger Side Part Number: 15661508
Product Specifications
- Other Name: Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Upper Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Shaft Assembly, Upper Part Number: 12385857
Product Specifications
- Other Name: Shaft Kit, Steering Knuckle Upper Control Arm; Control Arm Shaft Kit; Control Arm Shaft; Upper Shaft; Shaft; Shaft Kit, Upper Control Arm Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Passenger Side Part Number: 15003924
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Replaces: 12470310, 12383464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Upper Control Arm, Passenger Side Part Number: 12388432
Product Specifications
- Other Name: Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Upper Passenger Side
- Replaces: 15665176, 15665187
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Upper Control Arm, Driver Side Part Number: 12388431
Product Specifications
- Other Name: Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Upper Driver Side
- Replaces: 15665186
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 15293530
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lower Control Arm, Driver Side Part Number: 15777766
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Replaces: 12388446, 15018806, 12472994
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Blazer | Base, LS, LT, Trailblazer | 6 Cyl 4.3 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Chevrolet Blazer Control Arm

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Blazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Blazer Control Arm includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Control Arm in Chevrolet Blazer is an assembly that binds the frame to wheels and holds supports units such as, shock and spring. In relation to the conditions on the road, these arms swing in order that the wheels can move up and down. There are several variants of Control Arms as the major characteristics of a particular Control Arm depends on its suspension type, they all have bushes for the connection to the frame and ball joints for joining the wheel. Previously most the Control Arms were made of stamped steel and with the new arrivals coming in cast iron or even aluminum made models. These arms are relatively robust but they can give indications of rusting,bending or distortion in view of recurrent impacts. Available Control Arms are offered for Heavy duty construction, precision alignment and increased compatibility with wider wheels and tires.

Chevrolet Blazer Control Arm Parts and Q&A

Lower Control Arm, Driver Side
15003923
Q: How to replace the lower control arm on Chevrolet Blazer?
A:
Start by supporting the vehicle's elevation and then install a safety stand beneath the lower Control Arm for support. Start by taking off the wheel and tire then remove the stabilizer shaft links from the lower Control Arm. First detach the shock absorber lower nut and bolt then remove the Torsion Bars before removing the wheel drive shaft. Use tools j 43631 Ball Joint separator with j 45851 Ball Joint separator protector adapters to disconnect the lower Ball Joint stud from the Steering Knuckle after removing the lower Ball Joint retaining nut. The work sequence starts with pulling off lower Control Arm nuts paired with 15-series washers followed by lower Control Arm bolts and then moving on to lower Control Arm nuts using 25/35-series washers and finally removing lower Control Arm bolts to extract the whole lower Control Arm. The installation requires positioning the new lower Control Arm followed by 15-series bolt installation and subsequent 25/35-series bolt installation while applying torque to 175 nm (129 ft. Lbs.). After putting the lower Ball Joint stud into the Steering Knuckle assembly you must install the corresponding nut followed by proper torque adjustment to 100 nm (74 ft. Lbs.). You should now install all components in the following order: the torsion bars first, then install the shock absorber lower nut and bolt, and finish by attaching stabilizer shaft links to the lower Control Arm. Reinstall the tire assemblies under the wheel followed by stand removal before vehicle lowering for alignment procedures.