What Tools Are Required to Service and Repair the V5 A/C Clutch on Chevrolet Camaro?

The v5 - conventional mount compressor clutch service requires the following crucial tools: the complete tool kit for compressor clutch service on the v5 - conventional mount includes the hub and drive plate remover and installer (J 33013-B) and the 6-point 13 mm socket (J 33022) as well as the clutch hub holding tool (J 33027-A) and the compressor holding fixture (J 34992). Hub and drive plate remover and installer (J 33013-B), 6-point 13 mm socket (J 33022), clutch hub holding tool (J 33027-A), and compressor holding fixture (J 34992). Place the compressor within the compressor holding fixture (J 34992) first. Slip the shaft key through the clutch plate groove on the hub before making sure it extends 3.2mm (0.126 in) beyond the groove edge. Caretfully clean all friction surfaces of three components including the clutch plate and hub and clutch pulley rotor before properly aligning the shaft key with the shaft keyway. Driving or pounding on the clutch hub or shaft will lead to internal damage of the compressor. Set down the compressor shaft's clutch plate and hub assembly before you reverse the hub and drive plate remover and installer (J 33013-B) body direction and remove its center screw. Thread the hub and drive plate remover and installer (J 33013-B) containing the bearing onto the compressor shaft followed by loosening its body to let the center screw advance toward the shaft end. Turn your wrench on the center screw while preventing the screw from fully matching the compressor shaft to stop key wedging and hub breaking. Use the hex portion of the body on the hub and drive plate remover and installer (J 33013-B) to press the hub onto the shaft before tightening it a few times before removal. Make sure the shaft key stays in position when finalizing the clutch plate and hub assembly placement and make sure the frictional surfaces maintain a 0.40-0.50 mm (0.016-0.020 in) gap. Follow removal of the hub and drive plate remover and installer (J 33013-B) by checking if the shaft key sits directly on or taller than the clutch hub before installing the shaft nut. Secure the clutch hub holding tool (J 33027-A) to the clutch plate and hub assembly while applying a torque wrench at 17.5 n.m (12.5 lb ft) and using the 6-point 13 mm socket (J 33022). Tighten the shaft nut just beyond 16.5 n.m (12 lb ft) compression. After installing the shaft nut you should perform a manual spin test of the pulley rotor to verify it does not come into contact with the clutch drive plate.

How to replace the A/C Clutch assembly on Chevrolet Malibu?

Start by removing the Drive Belt from the A/C Compressor then secure the vehicle using a lift. Remove the lower air deflector while paying attention to extract three adjustable dowels from component j 37872 and install three 5/16 x 1 inch bolts. When removing the compressor clutch plate you should first discard the bolt and then use (J 37872) to hold the plate in place while you finish your removal work. First apply (J 6083) to remove the compressor pulley snap ring then handle both the pulley and its coil snap ring before taking the clutch coil off. Prepare the clutch plate bolt threads by cleaning them with an m6x1.0 tap followed by compressed air blowout of debris. Use (J 6083) tools to install compressor clutch coil and snap ring then install compressor pulley and its snap ring. Apply oil to the 0.4 mm (0.016 in) air gap shim before placing it in the clutch drive plate's interior. Then install the clutch plate while checking no part touches the pulley. Use shims to achieve an optimal air gap between 0.3 and 0.6 millimeters (0.012 to 0.024 inches) between the pulley and drive plate. Fitting the clutch drive plate bolt requires adhesive repair on 5 colored threads before installation while tightening with (J 37872) to achieve an 12 nm torque (106 lb in). Complete installation involves placing the lower air deflector followed by lowering the vehicle before securing the Drive Belt to the A/C Compressor. Test all fittings for leaks by using (J 39400-A).

OEM Chevrolet A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

122 A/C Clutches found

View related parts
Chevrolet Clutch & Pulley Part Number: 92279286
$218.68 MSRP: $392.26
You Save: $173.58 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, A/C; A/C Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 92266823, 92259968
Fits the following Chevrolet Models:
- Caprice | 2012-2013 | PPV | 8 Cyl 6.0 L FLEX
View related parts
Chevrolet Clutch & Pulley Part Number: 22986662
$130.56 MSRP: $245.18
You Save: $114.62 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch
- Replaced by: 85656962
Fits the following Chevrolet Models:
- Silverado 1500 | 2014-2019 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Silverado 1500 LD | 2019 | Custom, LT, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 19317014
$579.35 MSRP: $1087.98
You Save: $508.63 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, A/C; A/C Compressor Clutch; Clutch Kit, A/C Compressor Clutch
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Clutch Plate & Hub Assembly Part Number: 86806081
$138.72 MSRP: $251.09
You Save: $112.37 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 85008617
Fits the following Chevrolet Models:
- Traverse | 2018-2023 | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 19433078
$213.35 MSRP: $400.66
You Save: $187.31 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, A/C; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 19436021
Fits the following Chevrolet Models:
- Express 1500 | 2003-2010 | Base, LS, LT | 6 Cyl 4.3 L GAS
- Express 2500 | 2003-2010 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L DIESEL
- Express 3500 | 2006-2010 | Base | 8 Cyl 6.6 L DIESEL
- Silverado 1500 | 2001-2007 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
- Silverado 1500 Classic | 2007 | LS, WT | 6 Cyl 4.3 L GAS
- Silverado 2500 HD | 2001-2007 | Base, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Clutch Kit Part Number: 86805576
$133.11 MSRP: $249.98
You Save: $116.87 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 84427786
Fits the following Chevrolet Models:
- Malibu | 2018-2023 | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Clutch Part Number: 20918600
$115.48 MSRP: $209.04
You Save: $93.56 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, A/C; A/C Compressor Clutch; Clutch Kit, A/C Compressor Clutch
Fits the following Chevrolet Models:
- Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX
View related parts
Chevrolet Clutch & Pulley Part Number: 92266822
$166.66 MSRP: $312.98
You Save: $146.32 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, A/C; A/C Compressor Clutch; Clutch
- Replaced by: 92279285
Fits the following Chevrolet Models:
- Caprice | 2012-2013 | PPV | 6 Cyl 3.6 L FLEX
View related parts
Chevrolet Clutch & Pulley Part Number: 84815640
$459.30 MSRP: $831.32
You Save: $372.02 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 86801140
Fits the following Chevrolet Models:
- Camaro | 2020-2024 | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Clutch Part Number: 86808035
$121.97 MSRP: $220.76
You Save: $98.79 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 85534587
Fits the following Chevrolet Models:
- Corvette | 2023 | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 95016505
$185.82 MSRP: $348.95
You Save: $163.13 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
Fits the following Chevrolet Models:
- Sonic | 2012 | LT, LTZ | 4 Cyl 1.4 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 86811105
$146.95 MSRP: $275.96
You Save: $129.01 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 92276909
Fits the following Chevrolet Models:
- Caprice | 2015-2017 | PPV | 8 Cyl 6.0 L FLEX
- SS | 2014-2017 | Base | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 23505629
$117.50 MSRP: $220.67
You Save: $103.17 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch Kit, A/C Compressor Clutch
Fits the following Chevrolet Models:
- Silverado 1500 | 2016-2018 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 86811096
$134.45 MSRP: $252.47
You Save: $118.02 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 85665223
Fits the following Chevrolet Models:
- Equinox | 2012-2016 | L, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Clutch Part Number: 42783862
$119.93 MSRP: $217.06
You Save: $97.13 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 94517793
Fits the following Chevrolet Models:
- Sonic | 2014-2018 | LS, LT, LTZ | 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
View related parts
Chevrolet Clutch & Pulley Part Number: 92458717
$267.86 MSRP: $484.82
You Save: $216.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
Fits the following Chevrolet Models:
- Caprice | 2014 | PPV | 6 Cyl 3.6 L FLEX
View related parts
Chevrolet Clutch & Pulley Part Number: 86789828
$123.93 MSRP: $224.30
You Save: $100.37 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch Plate & Hub Assembly; Clutch
- Replaced by: 85652433
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Suburban | 2021-2022 | Commercial, High Country, LS, LT, Premier, RST, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Tahoe | 2021-2022 | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Clutch & Pulley Part Number: 20894158
$161.58 MSRP: $303.45
You Save: $141.87 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch
- Replaced by: 86811077
Fits the following Chevrolet Models:
- Express 1500 | 2010-2014 | Base | 6 Cyl 4.3 L GAS
- Express 2500 | 2010-2024 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Express 3500 | 2010-2024 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Silverado 1500 | 2011-2013 | LS, WT | 6 Cyl 4.3 L GAS
- Silverado 2500 HD | 2011-2013 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2011-2013 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
Chevrolet Clutch & Pulley Part Number: 86789844
$125.05 MSRP: $224.30
You Save: $99.25 (45%)
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 85652433
Fits the following Chevrolet Models:
- Silverado 1500 | 2019-2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 1500 LD | 2019 | Custom, LT, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 LTD | 2022 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 2500 HD | 2020-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Suburban | 2021-2023 | Commercial, High Country, LS, LT, Premier, RST, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Tahoe | 2021-2023 | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Clutch Part Number: 86798579
$134.15 MSRP: $240.62
You Save: $106.47 (45%)
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; Clutch Kit, A/C Compressor Clutch
- Replaced by: 85656965
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2015-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2015-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Suburban 3500 HD | 2016-2019 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More

| Page 1 of 7 |Next >

1-20 of 122 Results

Chevrolet A/C Clutch

Choose OEM A/C Clutch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Chevrolet's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Chevrolet A/C Clutch. You can shop at highly competitive prices and protect your budget. All our genuine Chevrolet parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Chevrolet A/C Clutch Parts and Q&A

Compressor Pulley
6581515
Q: What Tools Are Required to Service and Repair the V5 A/C Clutch on Chevrolet Camaro?
A:
The v5 - conventional mount compressor clutch service requires the following crucial tools: the complete tool kit for compressor clutch service on the v5 - conventional mount includes the hub and drive plate remover and installer (J 33013-B) and the 6-point 13 mm socket (J 33022) as well as the clutch hub holding tool (J 33027-A) and the compressor holding fixture (J 34992). Hub and drive plate remover and installer (J 33013-B), 6-point 13 mm socket (J 33022), clutch hub holding tool (J 33027-A), and compressor holding fixture (J 34992). Place the compressor within the compressor holding fixture (J 34992) first. Slip the shaft key through the clutch plate groove on the hub before making sure it extends 3.2mm (0.126 in) beyond the groove edge. Caretfully clean all friction surfaces of three components including the clutch plate and hub and clutch pulley rotor before properly aligning the shaft key with the shaft keyway. Driving or pounding on the clutch hub or shaft will lead to internal damage of the compressor. Set down the compressor shaft's clutch plate and hub assembly before you reverse the hub and drive plate remover and installer (J 33013-B) body direction and remove its center screw. Thread the hub and drive plate remover and installer (J 33013-B) containing the bearing onto the compressor shaft followed by loosening its body to let the center screw advance toward the shaft end. Turn your wrench on the center screw while preventing the screw from fully matching the compressor shaft to stop key wedging and hub breaking. Use the hex portion of the body on the hub and drive plate remover and installer (J 33013-B) to press the hub onto the shaft before tightening it a few times before removal. Make sure the shaft key stays in position when finalizing the clutch plate and hub assembly placement and make sure the frictional surfaces maintain a 0.40-0.50 mm (0.016-0.020 in) gap. Follow removal of the hub and drive plate remover and installer (J 33013-B) by checking if the shaft key sits directly on or taller than the clutch hub before installing the shaft nut. Secure the clutch hub holding tool (J 33027-A) to the clutch plate and hub assembly while applying a torque wrench at 17.5 n.m (12.5 lb ft) and using the 6-point 13 mm socket (J 33022). Tighten the shaft nut just beyond 16.5 n.m (12 lb ft) compression. After installing the shaft nut you should perform a manual spin test of the pulley rotor to verify it does not come into contact with the clutch drive plate.
Clutch & Pulley
22692378
Q: How to replace the A/C Clutch assembly on Chevrolet Malibu?
A:
Start by removing the Drive Belt from the A/C Compressor then secure the vehicle using a lift. Remove the lower air deflector while paying attention to extract three adjustable dowels from component j 37872 and install three 5/16 x 1 inch bolts. When removing the compressor clutch plate you should first discard the bolt and then use (J 37872) to hold the plate in place while you finish your removal work. First apply (J 6083) to remove the compressor pulley snap ring then handle both the pulley and its coil snap ring before taking the clutch coil off. Prepare the clutch plate bolt threads by cleaning them with an m6x1.0 tap followed by compressed air blowout of debris. Use (J 6083) tools to install compressor clutch coil and snap ring then install compressor pulley and its snap ring. Apply oil to the 0.4 mm (0.016 in) air gap shim before placing it in the clutch drive plate's interior. Then install the clutch plate while checking no part touches the pulley. Use shims to achieve an optimal air gap between 0.3 and 0.6 millimeters (0.012 to 0.024 inches) between the pulley and drive plate. Fitting the clutch drive plate bolt requires adhesive repair on 5 colored threads before installation while tightening with (J 37872) to achieve an 12 nm torque (106 lb in). Complete installation involves placing the lower air deflector followed by lowering the vehicle before securing the Drive Belt to the A/C Compressor. Test all fittings for leaks by using (J 39400-A).